Installation Guide

ManualsBrandsZuumMedia ManualsElectrical13-42 in. Articulating Arm TV Full Motion Wall Mount

Model: AE13-42-GY

Fits Most 13”-42” TVs

20 kgs/44 lbs

Carefully open the carton, remove contents and lay out on cardboard or other protective surface to avoid damage.

Check package contents against the Supplied Parts List on the next page to ensure that all components were

received undamaged. Do not use damaged or defective parts.

Carefully read all instructions before attempting installation.

Install and operate this device with care. Please read these instructions before beginning the installation, and carefully

follow all instructions contained herein. Use proper safety equipment during installation.

Please call a qualified installation contractor for help if you:

don’t understand these directions or have any doubts about the safety of the installation.

are uncertain about the nature of your wall.

Do not use this product for any other purpose or in any other configuration not explicitly specified in these instructions.

ZuumMedia will not be liable for any and all injury’s or damages as of the results of incorrect assembly, incorrect

installation, or incorrect use of this product.

DISCLAIMER

180

2.52”

(64mm)

5.9”

(150mm)

5.9”

(150mm)

1.42”

(36mm)

7.87”

(200mm)

7.87”

(200mm)

Summary of content (6 pages)

PAGE 1
Model: AE13-42-GY Fits Most 13”-42” TVs 20 kgs/44 lbs 2.52” (64mm) 5.9” (150mm) 5.9” (150mm) 1.42” (36mm) 7.87” (200mm) 15 15 180 180 180 7.87” (200mm) Carefully open the carton, remove contents and lay out on cardboard or other protective surface to avoid damage. Check package contents against the Supplied Parts List on the next page to ensure that all components were received undamaged. Do not use damaged or defective parts. Carefully read all instructions before attempting installation.
PAGE 2
Supplied Par ts List (1) Wall Plate-b (1) Wall Bracket-a (1) 4mm Allen Key-d (1) 3mm Allen Key-c (4) M4x14-e (4) M5x15-f (4) M4/M5 Washer-i (4) M6x14-g (4) M6/M8 Washer-j (4) M8x20-h (8) M6/M8 Spacer-k (2) Concrete Anchor-m (2) ST6.
PAGE 3
Step 1 Mounting the Wall Plate to a Wood Wall 1 Using a Stud finder, find the exact location of the stud behind the wall 2 Mark the holes in the center of the stud using a level 3 Drill a 3/16” hole where you made the marking 4 Screw the wall plate onto the wall -l 5 Check and make sure everything is level 3
PAGE 4
Step 1 Mounting the Wall Plate to a Brick Wall 1 Mark the holes in the center of the stud using a level 2 Drill a 3/8” hole where you made the marking 3 Screw the wall plate onto the wall 4 m Check and make sure everything is level -l 4
PAGE 5
Step 2 Attaching the Bracket to the TV Top of the TV e, f, g, h i, j k j h k k j h Note: Choose the appropriate screws, washers and spacers (if necessary) according to the type of TV 5
PAGE 6
Step 3 Installing the TV 1. Carefully lift your TV and slide the bracket base into the wall plate 2. Tighten the screw on the bracket base and secure it to the wall Step 4 Cable Management 1. Connect the cables to your display and route them along the bracket arms between the cable covers 2.