Specification

ManualsBrandsZurn ManualsAccessories24 in. Floor Drain Grate

Table Of Contents

Page 2

Zurn Industries, LLC | Specication Drainage Operation

1801 Pittsburgh Avenue, Erie, PA 16502, Ph. 855.663.9876

In Canada | Zurn Industries Limited

7900 Goreway Drive, Unit 10, Brampton, Ontario L6T 5W6, Ph. 877.892.5216

www.zurn.com

↕- Click on “Item ID” to go to grate page, ‘Back to Index” will return you to this page.

P12-ADA-USA........................ ADA Compliant Grate, Ductile Iron

P12-BDC................................ Slotted Grate, Black Acid Resistant Epoxy Coated Ductile Iron

P12-BDE................................ Slotted Grate, Black Acid Resistant Epoxy Coated Ductile Iron

P12-BDE-USA........................ Slotted Grate, Black Acid Resistant Epoxy Coated Ductile Iron

P12-BDF................................. Slotted Grate, Black Acid Resistant Epoxy Coated Ductile Iron

P12-BG.................................. Slotted Bar Grate, Galvanized Ductile Iron

P12-BG-L................................ Slotted Bar Grate, Galvanized Steel

P12-DC................................... Solid Cover, Ductile Iron

P12-DC-G............................... Solid Cover, Galvanized Ductile Iron

P12-DGC................................ Slotted Grate, Ductile Iron

P12-DGC-USA....................... Slotted Grate, Ductile Iron

P12-DGE................................ Slotted Grate, Ductile Iron

P12-DGE-USA........................ Slotted Grate, Ductile Iron

P12-DGF................................. Slotted Grate, Ductile Iron

P12-FG................................... Fabricated Grate, Galvanized Steel

P12-FS................................... Fabricated Grate, Stainless Steel

P12-GADA-USA.................... ADA Compliant Grate, Galvanized Ductile Iron

P12-GDC................................ Slotted Grate, Galvanized Ductile Iron

P12-GDC-USA........................Slotted Grate, Galvanized Ductile Iron

P12-GDE................................ Slotted Grate, Galvanized Ductile Iron

P12-GDE-USA........................ Slotted Grate, Galvanized Ductile Iron

P12-GDF................................. Slotted Grate, Galvanized Ductile Iron

P12-GG.................................. Slotted Grate, Vinylester Fiberglass

P12-GHPD.............................. Heel-Proof Longitudinal Grate, Galvanize Ductile Iron

P12-GHPDE........................... Heel-Proof Longitudinal Grate, Galvanized Ductile Iron

P12-GHPDE-USA

.................... Heel-Proof Longitudinal Grate, Galvanized Ductile Iron

P12-HPD................................ Heel-Proof Longitudinal Grate, Ductile Iron

P12-HPDE.............................. Heel-Proof Longitudinal Grate, Ductile Iron

P12-HPDE-USA..................... Heel-Proof Longitudinal Grate, Ductile Iron

P12-PG.................................. Perforated Grate, Galvanized Steel

P12-PGR................................ Raised Perforated Grate, Galvanized Steel

P12-PS................................... Perforated Grate, Stainless Steel

P12-PSRP12-PSR................................. Raised Perforated Grate, Stainless SteelRaised Perforated Grate, Stainless Steel

P12-RFGP12-RFG................................ Reinforced Galvanized Grate, SteelReinforced Galvanized Grate, Steel

P12-RFGCP12-RFGC.............................. Reinforced Galvanized Grate, SteelReinforced Galvanized Grate, Steel

P12-RFSP12-RFS................................. Reinforced Grate, Stainless SteelReinforced Grate, Stainless Steel

P12-RFSCP12-RFSC.............................. Reinforced Grate, Stainless SteelReinforced Grate, Stainless Steel

P12-RPGP12-RPG................................ Reinforced Perforated Grate, Galvanized SteelReinforced Perforated Grate, Galvanized Steel

P12-RPGCP12-RPGC.............................. Reinforced Perforated Grate, Reinforced Perforated Grate, Galvanized SteelGalvanized Steel

P12-RPGRP12-RPGR.............................. Reinforced Raised Perforated Grate, Galvanized SteelReinforced Raised Perforated Grate, Galvanized Steel

P12-RPGRC P12-RPGRC .......................... Reinforced Raised Perforated Grate, GalvanizedReinforced Raised Perforated Grate, Galvanized

P12-RPSCP12-RPSC.............................. Reinforced Perforated Grate, Stainless SteelReinforced Perforated Grate, Stainless Steel

P12-RPSRP12-RPSR.............................. Reinforced Raised Perforated Grate, Stainless SteelReinforced Raised Perforated Grate, Stainless Steel

P12-RPSRCP12-RPSRC........................... Reinforced Raised Perforated Grate, Stainless SteelReinforced Raised Perforated Grate, Stainless Steel

P12-SBG-LP12-SBG-L............................. Slotted Bar Grate, Stainless SteelSlotted Bar Grate, Stainless Steel

P12-SBGEP12-SBGE............................. Slotted Bar Grate, Stainless SteelSlotted Bar Grate, Stainless Steel

P12-SWGBP12-SWGB.................................. Wire Bar Grate,Stainless SteelWire Bar Grate,Stainless Steel

P12-SWGB-ASP12-SWGB-AS...................... Slip Resistant Wire Bar Grate,Stainless SteelSlip Resistant Wire Bar Grate,Stainless Steel

P12-SSCDP12-SSCD.............................. Reinforced Cover, Stainless SteelReinforced Cover, Stainless Steel

INDEX PAGE for 12” Wide Grates / Covers

Rev. AC

Date: 10/20/2022

C.N. No. 144854

Form # FT649

Page 1 of 50

Summary of content (50 pages)

PAGE 1
INDEX PAGE for 12” Wide Grates / Covers ↕- Click on “Item ID” to go to grate page, ‘Back to Index” will return you to this page. P12-ADA-USA........................ ADA Compliant Grate, Ductile Iron P12-BDC................................ Slotted Grate, Black Acid Resistant Epoxy Coated Ductile Iron P12-BDE................................ Slotted Grate, Black Acid Resistant Epoxy Coated Ductile Iron P12-BDE-USA........................ Slotted Grate, Black Acid Resistant Epoxy Coated Ductile Iron P12-BDF....
PAGE 2
P12-ADA-USA 12 [305] WIDE DOMESTIC GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Back to Index Item No. Part Number Item I.D. 1 84257 P12-ADA-USA ADA-USA GRATE ENGINEERING SPECIFICATION: The Zurn P12-ADA-USA Ductile Iron Grate, is 11-1/4” [286mm] wide X 23-15/16” [608mm] long, weighing 15.6 lbs per linear foot [23kg/m]. The grate has an open area of 65.
PAGE 3
P12-BDC 12 [305] WIDE SLOTTED GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 2 84225 P12-BDC Back to Index BDC GRATE ENGINEERING SPECIFICATION: The Zurn P12-BDC Black Acid Resistant Epoxy Coated Ductile Iron Slotted Grate, is 11-1/4” [286mm] wide X 23-15/16” [608mm] long, weighing 14.7 lbs per linear foot [22 kg/m]. The grate has an open area of 86.
PAGE 4
P12-BDE 12 [305] WIDE SLOTTED GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 3 82038 P12-BDE Back to Index BDE GRATE ENGINEERING SPECIFICATION: The Zurn P12-BDE Black Acid Resistant Epoxy Coated Ductile Iron Slotted Grate, is 11-1/4” [286mm] wide X 23-15/16” [608mm] long, weighing 19.8 lbs per linear foot [29 kg/m]. The grate has an open area of 60.
PAGE 5
P12-BDE-USA 12 [305] WIDE DOMESTIC SLOTTED GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 4 84220 P12-BDE-USA Back to Index BDE-USA GRATE ENGINEERING SPECIFICATION: The Zurn P12-BDE-USA Black Acid Resistant Epoxy Coated Ductile Iron Slotted Grate, is 11-1/4” [286mm] wide X 23-15/16” [608mm] long, weighing 19.5 lbs per linear foot [29 kg/m]. The grate has an open area of 60.
PAGE 6
P12-BDF 12 [305] WIDE SLOTTED GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 5 65868 P12-BDF Back to Index BDF GRATE ENGINEERING SPECIFICATION: The Zurn P12-BDF Black Acid Resistant Epoxy Coated Ductile Iron Slotted Grate, is 11-1/4” [286mm] wide X 24” [610mm] long, weighing 26 lbs per linear foot [39 kg/m].
PAGE 7
P12-BG 12 [305] WIDE BAR GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Back to Index Item No. Part Number Item I.D. 6 62230 P12-BG BG GRATE ENGINEERING SPECIFICATION: The Zurn P12-BG Galvanized Ductile Iron Slotted Bar Grate, is 11-1/4” [286mm] wide X 24” [610mm] long, weighing 19.7 lbs per linear foot [29 kg/m]. The grate has an open area of 73.
PAGE 8
P12-BG-L 12 [305] WIDE BAR GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 7 94015 P12-BG-L Back to Index BG-L GRATE ENGINEERING SPECIFICATION: The Zurn P12-BG-L Galvanized Steel Slotted Bar Grate, is 11-1/4” [286mm] wide X 24” [610mm] long, weighing 13.9 lbs per linear foot [21 kg/m]. The grate has an open area of 101.
PAGE 9
P12-DC 12 [305] WIDE COVER Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Back to Index Item No. Part Number Item I.D. 8 66352 P12-DC DC COVER ENGINEERING SPECIFICATION: The Zurn P12-DC Ductile Iron Solid Cover, is 11-1/4” [286mm] wide X 23-15/16” [608mm] long, weighing 27.9 lbs per linear foot [42 kg/m].
PAGE 10
P12-DC-G 12 [305] WIDE COVER Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Back to Index Item No. Part Number Item I.D. 9 66352 P12-DC-G DC-G COVER ENGINEERING SPECIFICATION: The Zurn P12-DC-G Galvanized Ductile Iron Solid Cover, is 11-1/4” [286mm] wide X 23-15/16” [608mm] long, weighing 27.9 lbs per linear foot [42 kg/m].
PAGE 11
P12-DGC 12 [305] WIDE SLOTTED GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 10 84225 P12-DGC Back to Index DGC GRATE ENGINEERING SPECIFICATION: The Zurn P12-DGC Ductile Iron Slotted Grate, is 11-1/4” [286mm] wide X 23-15/16” [608mm] long, weighing 14.7 lbs per linear foot [22 kg/m]. The grate has an open area of 86.
PAGE 12
P12-DGC-USA 12 [305] WIDE DOMESTIC SLOTTED GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 11 84225 P12-DGC-USA Back to Index DGC-USA GRATE ENGINEERING SPECIFICATION: The Zurn P12-DGC-USA Ductile Iron Slotted Grate, is 11-1/4” [286mm] wide X 23-15/16” [608mm] long, weighing 14.7 lbs per linear foot [22 kg/m]. The grate has an open area of 86.
PAGE 13
P12-DGE 12 [305] WIDE SLOTTED GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 12 82038 P12-DGE Back to Index DGE GRATE ENGINEERING SPECIFICATION: The Zurn P12-DGE Ductile Iron Slotted Grate, is 11-1/4” [286mm] wide X 23-15/16” [608mm] long, weighing 19.8 lbs per linear foot [29 kg/m]. The grate has an open area of 60.
PAGE 14
P12-DGE-USA 12 [305] WIDE DOMESTIC SLOTTED GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 13 84220 P12-DGE-USA Back to Index DGE-USA GRATE ENGINEERING SPECIFICATION: The Zurn P12-DGE-USA Ductile Iron Slotted Grate, is 11-1/4” [286mm] wide X 23-15/16” [608mm] long, weighing 19.5 lbs per linear foot [29 kg/m]. The grate has an open area of 60.
PAGE 15
P12-DGF 12 [305] WIDE SLOTTED GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 14 65868 P12-DGF Back to Index DGF GRATE ENGINEERING SPECIFICATION: The Zurn P12-DGF Ductile Iron Slotted Grate, is 11-1/4” [286mm] wide X 24” [610mm] long, weighing 26 lbs per linear foot [39 kg/m].
PAGE 16
P12-FG 12 [305] WIDE DOMESTIC SLOTTED GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 15 61019 P12-FG Back to Index FG GRATE ENGINEERING SPECIFICATION: The Zurn P12-FG Fabricated Galvanized Steel, is 11-3/8” [289mm] wide X 24” [610mm] long, weighing 7.7 lbs per linear foot [11 kg/m]. The grate has an open area of 25.
PAGE 17
P12-FS 12 [305] WIDE DOMESTIC SLOTTED GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 16 61019 P12-FS Back to Index FS GRATE ENGINEERING SPECIFICATION: The Zurn P12-FS Fabricated Stainless Steel, is 11-3/8” [289mm] wide X 24” [610mm] long, weighing 7.9 lbs per linear foot [12 kg/m]. The grate has an open area of 25.
PAGE 18
P12-GADA-USA 12 [305] WIDE DOMESTIC GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Back to Index Item No. Part Number Item I.D. 17 84257 P12-GADA-USA GADA-USA GRATE ENGINEERING SPECIFICATION: The Zurn P12-GADA-USA Galvanized Ductile Iron ADA Compliant Grate, is 11-1/4” [286mm] wide X 23-15/16” [608mm] long, weighing 15.6 lbs per linear foot [23 kg/m]. The grate has an open area of 65.
PAGE 19
P12-GDC 12 [305] WIDE SLOTTED GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 18 84225 P12-GDC Back to Index GDC GRATE ENGINEERING SPECIFICATION: The Zurn P12-GDC Galvanized Ductile Iron Slotted Grate, is 11-1/4” [286mm] wide X 23-15/16” [608mm] long, weighing 14.7 lbs per linear foot [22 kg/m]. The grate has an open area of 80.
PAGE 20
P12-GDC-USA 12 [305] WIDE DOMESTIC SLOTTED GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 19 84225 P12-GDC-USA Back to Index GDC-USA GRATE ENGINEERING SPECIFICATION: The Zurn P12-GDC-USA Galvanized Ductile Iron Slotted Grate, is 11-1/4” [286mm] wide X 23-15/16” [608mm] long, weighing 14.7 lbs per linear foot [22 kg/m]. The grate has an open area of 86.
PAGE 21
P12-GDE 12 [305] WIDE SLOTTED GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 20 82038 P12-GDE Back to Index GDE GRATE ENGINEERING SPECIFICATION: The Zurn P12-GDE Galvanized Ductile Iron Slotted Grate, is 11-1/4” [286mm] wide X 23-15/16” [608mm] long, weighing 19.8 lbs per linear foot [29 kg/m]. The grate has an open area of 60.
PAGE 22
P12-GDE-USA 12 [305] WIDE DOMESTIC SLOTTED GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 21 84220 P12-GDE-USA Back to Index GDE-USA GRATE ENGINEERING SPECIFICATION: The Zurn P12-GDE-USA Galvanized Ductile Iron Slotted Grate, is 11-1/4” [286mm] wide X 23-15/16” [608mm] long, weighing 19.5 lbs per linear foot [29 kg/m]. The grate has an open area of 60.
PAGE 23
P12-GDF 12 [305] WIDE SLOTTED GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 22 65868 P12-GDF Back to Index GDF GRATE ENGINEERING SPECIFICATION: The Zurn P12-GDF Galvanized Ductile Iron Slotted Grate, is 11-1/4” [286mm] wide X 24” [610mm] long, weighing 26 lbs per linear foot [39 kg/m].
PAGE 24
P12-GG 12 [305] WIDE SLOTTED GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 23 58553 P12-GG Back to Index GG GRATE ENGINEERING SPECIFICATION: The Zurn P12-GG Vinylester Fiberglass Slotted Grate, is 11-3/8” [289mm] wide X 24” [610mm] long, weighing 2.8 lbs per linear foot [4 kg/m]. The grate has an open area of 82.
PAGE 25
P12-GHPD 12 [305] WIDE LONGITUDINAL GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Back to Index Item No. Part Number Item I.D. 24 61015 P12-GHPD GHPD GRATE ENGINEERING SPECIFICATION: The Zurn P12-GHPD Galvanized Ductile Iron Heel-Proof Longitudinal Grate, is 11-1/4” [286mm] wide X 24” [610mm] long, weighing 14 lbs per linear foot [21 kg/m]. The grate has an open area of 33.
PAGE 26
P12-GHPDE 12 [305] WIDE LONGITUDINAL GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 25 94325 P12-GHPDE Back to Index GHPDE GRATE ENGINEERING SPECIFICATION: The Zurn P12-GHPDE Galvanized Ductile Iron Heel-Proof Longitudinal Grate, is 11-7/32” [285mm] wide X 24” [610mm] long, weighing 29.6 lbs per linear foot [44 kg/m]. The grate has an open area of 29.
PAGE 27
P12-GHPDE-USA 12 [305] WIDE DOMESTIC LONGITUDINAL GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 26 94325 P12-GHPDE-USA Back to Index GHPDE-USA GRATE ENGINEERING SPECIFICATION: The Zurn P12-GHPDE-USA Galvanized Ductile Iron Heel-Proof Longitudinal Grate, is 11-7/32” [285mm] wide X 24” [610mm] long, weighing 29.6 lbs per linear foot [44 kg/m]. The grate has an open area of 29.
PAGE 28
P12-HPD 12 [305] WIDE LONGITUDINAL GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Back to Index Item No. Part Number Item I.D. 27 61015 P12-HPD HPD GRATE ENGINEERING SPECIFICATION: The Zurn P12-HPD Ductile Iron Heel-Proof Longitudinal Grate, is 11-1/4” [286mm] wide X 24” [610mm] long, weighing 14 lbs per linear foot [21 kg/m]. The grate has an open area of 33.
PAGE 29
P12-HPDE 12 [305] WIDE LONGITUDINAL GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 28 94325 P12-HPDE Back to Index HPDE GRATE ENGINEERING SPECIFICATION: The Zurn P12-HPDE Ductile Iron Heel-Proof Longitudinal Grate, is 11-7/32” [285mm] wide X 24” [610mm] long, weighing 29.6 lbs per linear foot [44 kg/m]. The grate has an open area of 29.
PAGE 30
P12-HPDE-USA 12 [305] WIDE DOMESTIC LONGITUDINAL GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 29 94325 P12-HPDE-USA Back to Index HPDE-USA GRATE ENGINEERING SPECIFICATION: The Zurn P12-HPDE-USA Ductile Iron Heel-Proof Longitudinal Grate, is 11-7/32” [285mm] wide X 24” [610mm] long, weighing 29.6 lbs per linear foot [44 kg/m]. The grate has an open area of 29.
PAGE 31
P12-PG 12 [305] WIDE DOMESTIC PERFORATED GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 30 60745 P12-PG Back to Index PG GRATE ENGINEERING SPECIFICATION: The Zurn P12-PG Galvanized Perforated Steel, is 11-3/8” [289mm] wide X 24” [610mm] long, weighing 7 lbs per linear foot [10 kg/m]. The grate has an open area of 14.
PAGE 32
P12-PGR 12 [305] WIDE RAISED PERFORATED ANTI-SLIP DOMESTIC GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 31 300572 P12-PGR Back to Index PGR GRATE ENGINEERING SPECIFICATION: The Zurn P12-PGR Galvanized Steel Raised Perforated Grate, is 11-3/8” [289mm] wide X 24” [610mm] long, weighing 7 lbs per linear foot [10kg/m]. The grate has an open area of 14.
PAGE 33
P12-PS 12 [305] WIDE DOMESTIC PERFORATED GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 32 60745 P12-PS Back to Index PS GRATE ENGINEERING SPECIFICATION: The Zurn P12-PS Perforated Stainless Steel, is 11-3/8” [289mm] wide X 24” [610mm] long, weighing 7.3 lbs per linear foot [11 kg/m]. The grate has an open area of 14.
PAGE 34
P12-PSR 12 [305] WIDE RAISED PERFORATED ANTI-SLIP DOMESTIC GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 33 300572 P12-PSR Back to Index PSR GRATE ENGINEERING SPECIFICATION: The Zurn P12-PSR Stainless Steel Raised Perforated Grate, is 11-3/8” [289mm] wide X 24” [610mm] long, weighing 7.3 lbs per linear foot [11 kg/m]. The grate has an open area of 14.
PAGE 35
P12-RFG 12 [305] WIDE DOMESTIC GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 34 61019 P12-RFG Back to Index D E U N I T N O RFG GRATE ENGINEERING SPECIFICATION: The Zurn P12-RFG Reinforced Galvanized Steel, is 11-3/8” [289mm] wide X 24” [610mm] long, weighing 10.6 lbs per linear foot [16 kg/m]. The grate has an open area of 25.
PAGE 36
P12-RFGC 12 [305] WIDE SLOTTED GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 35 302789 P12-RFGC Back to Index RFGC GRATE ENGINEERING SPECIFICATION: The Zurn P12-RFGC Reinforced Galvanized Steel, is 11-3/8” [289mm] wide X 24” [610mm] long, weighing 16.4 lbs per linear foot [24 kg/m]. The grate has an open area of 20.
PAGE 37
P12-RFS 12 [305] WIDE DOMESTIC SLOTTED GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 36 61019 P12-RFS Back to Index D E U N I T N O RFS GRATE ENGINEERING SPECIFICATION: The Zurn P12-RFS Reinforced Stainless Steel, is 11-3/8” [289mm] wide X 24” [610mm] long, weighing 12.2 lbs per linear foot [18 kg/m]. The grate has an open area of 25.
PAGE 38
P12-RFSC 12 [305] WIDE SLOTTED GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 37 302814 P12-RFSC Back to Index RFSC GRATE ENGINEERING SPECIFICATION: The Zurn P12-RFSC Reinforced Stainless Steel, is 11-3/8” [289mm] wide X 24” [610mm] long, weighing 21.3 lbs per linear foot [32 kg/m]. The grate has an open area of 20.
PAGE 39
P12-RPG 12 [305] WIDE DOMESTIC PERFORATED GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 38 60745 P12-RPG Back to Index D E U N I T N O RPG GRATE ENGINEERING SPECIFICATION: The Zurn P12-RPG Reinforced Galvanized Perforated Steel, is 11-3/8” [289mm] wide X 24” [610mm] long, weighing 11.3 lbs per linear foot [17 kg/m]. The grate has an open area of 14.
PAGE 40
P12-RPGC 12 [305] WIDE REINFORCED PERFORATED GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 39 302813 P12-RPGC Back to Index RPGC GRATE ENGINEERING SPECIFICATION: ZURN P12-RPGC Reinforced Galvanized Perforated Steel, is 11-3/8” [289mm] wide X 24” [610mm] long, weighing 16.0 lbs per linear foot [24 kg/m]. The grate has an open area of 19.
PAGE 41
P12-RPGR 12 [305] WIDE REINFORCED RAISED PERFORATED ANTI-SLIP GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 40 300572 P12-RPGR Back to Index RPGR GRATE ENGINEERING SPECIFICATION: ZURN P12-RPGR Galvanized Steel Reinforced Raised Perforated Grate, is 11-3/8” [289mm] wide X 24” [610mm] long, weighing 11.3 lbs per linear foot [17 kg/m]. The grate has an open area of 14.
PAGE 42
P12-RPGRC 12 [305] WIDE REINFORCED RAISED PERFORATED ANTI-SLIP GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 41 305024 P12-RPGRC Back to Index RPGRC GRATE ENGINEERING SPECIFICATION: ZURN P12-RPGRC Galvanized Steel Reinforced Raised Perforated Grate, is 11-3/8” [289mm] wide X 24” [610mm] long, weighing 16.0 lbs per linear foot [24 kg/m]. The grate has an open area of 19.
PAGE 43
P12-RPSC 12 [305] WIDE REINFORCED PERFORATED GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 42 302785 P12-RPSC Back to Index RPSC GRATE ENGINEERING SPECIFICATION: ZURN P12-RPSC Reinforced Perforated Stainless Steel, is 11-3/8” [289mm] wide X 24” [610mm] long, weighing 21.0 lbs per linear foot [31 kg/m]. The grate has an open area of 19.
PAGE 44
P12-RPSR 12 [305] WIDE RAISED PERFORATED ANTI-SLIP GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 43 300572 P12-RPSR Back to Index RPSR GRATE ENGINEERING SPECIFICATION: ZURN P12-RPSR Stainless Steel Reinforced Raised Perforated Grate, is 11-3/8” [289mm] wide X 24” [610mm] long, weighing 11.6 lbs per linear foot [17 kg/m]. The grate has an open area of 14.
PAGE 45
P12-RPSRC 12 [305] WIDE REINFORCED RAISED PERFORATED ANTI-SLIP GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 44 305025 P12-RPSRC Back to Index RPSRC GRATE ENGINEERING SPECIFICATION: ZURN P12-RPSRC Stainless Steel Reinforced Raised Perforated Grate, is 11-3/8” [289mm] wide X 24” [610mm] long, weighing 21.0 lbs per linear foot [31 kg/m]. The grate has an open area of 14.
PAGE 46
P12-SBG-L 12 [305] WIDE DOMESTIC BAR GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 45 94015 P12-SBG-L Back to Index SBG-L GRATE ENGINEERING SPECIFICATION: ZURN P12-SBG-L Stainless Steel Slotted Bar Grate, is 11-1/4” [286mm] wide X 23-15/16” [608mm] long, weighing 13.9 lbs per linear foot [21 kg/m]. The grate has an open area of 101.
PAGE 47
P12-SBGE 12 [305] WIDE SLOTTED BAR GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 46 317008 P12-SBGE Back to Index SBGE GRATE ENGINEERING SPECIFICATION: ZURN P12-SBGE Stainless Steel Slotted Bar Grate with lockdowns, is 11-1/4” [286mm] wide X 23-15/16” [608mm] long, weighing 30 lbs per linear foot [44.6 kg/m]. The grate has an open area of 36.
PAGE 48
P12-SWGB 12 [305] WIDE WIRE GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 47 321194 P12-SWGB Back to Index SWGB GRATE ENGINEERING SPECIFICATION: ZURN P12-SWGB Stainless Steel Wire Grate, is 11-1/4” [286mm] wide X 23-15/16” [608mm] long, weighing 19.7 lbs per linear foot [29.3 kg/m]. The grate has an open area of 71.
PAGE 49
P12-SWGB-AS 12 [305] WIDE ANTI-SLIP WIRE GRATE Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 48 321194 P12-SWGB-AS Back to Index SWGB-AS GRATE ENGINEERING SPECIFICATION: ZURN P12-SWGB-AS Slip Resistant Stainless Steel Wire Grate, is 11-1/4” [286mm] wide X 23-15/16” [608mm] long, weighing 19.7 lbs per linear foot [29.3 kg/m]. The grate has an open area of 71.
PAGE 50
P12-SSCD 12 [305] WIDE COVER Design and Dimensional Data (inches and [ mm ]) are Subject to Manufacturing Tolerances and Change Without Notice Please Check  Item No. Part Number Item I.D. 49 60745 P12-SSCD Back to Index SSCD GRATE ENGINEERING SPECIFICATION: ZURN P12-SSCD Reinforced Solid Cover, Stainless Steel, is 11-3/8” [289mm] wide X 24” [610mm] long, weighing 11.7 lbs per linear foot [17 kg/m]. The cover has a DIN Rating of B, ANSI Rating of Medium-Duty and is ADA Compliant.