Gigabit Business IP Phone Z 22G Z 22G END CALL Quick Start Guide WWW.ZULTYS.
Package Contents Packaging Contents The following items are included in your package. If you find anything missing, contact your system administrator. Handset Cord IP Phone Handset Quick Start Guide Ethernet Cable Stand Power Adapter Wall Mount Bracket (Optional) (Optional) Note: We recommend that you use the accessories provided or approved by ZULTYS. The use of unapproved third-party accessories may result in reduced performance or damage. Assembling the Phone 1.
. Connect the network and power as shown below: The phone may be powered using the optional Zultys 5V DC power adapter or via Power over Ethernet (PoE). Your system administrator will advise which method to use. Power Adapter (DC 5V) Network PC (Optional) Note: The IP phone should only be used with a ZULTYS 5V DC power adapter. The use of a third-party power adapter may cause damage to the phone.
Basic Call Features Placing a Call Using the handset: 1. Pick up the handset. 2. Enter the number, and then press the Dial soft key or . --Alternatively-- Enter the number and then lift the handset to initiate the call. Using the speakerphone: 1. With the handset on-hook, enter the number. 2. Then press or the Dial soft key. Using the headset: 1. With the headset connected, press to activate the headset mode. 2. Enter the number, and then press the Dial soft key or .
Call Transfer You can transfer a call in the following ways: Blind Transfer 1. Press the Trans soft key during an active call. The call is placed on hold. 2. Enter the number you want to transfer to. 3. Press the Trans soft key again to complete the transfer. Semi-Attended Transfer 1. Press the Trans soft key during an active call. The call is placed on hold. 2. Enter the number you want to transfer to, and then press . 3. Press the Trans soft key when you hear the ring-back tone. Attended Transfer 1.
Customizing Customizing Your YourPhone Phone Call History 1. Press the key when the phone is idle to access the Call History, press or to select an entry. 2. After selecting an entry from the list, you can do the following: Press the Dial soft key to call the entry. Press the Delete soft key to delete the entry from the list. If you press the Option soft key, you can also do the following: Select Detail to view detailed information about the entry.
My Details Name Extension DID ZAC Login Credentials Login Name (case sensitive) Password Host/URL Assigned Phone ID Support Contact Phone Email Notes 7
FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
