ZTE CORPORATION ZTE A261+ GSM Dual-band GPRS Digital Mobile Phone User Manual 1
Copyright © 2008 by ZTE Corporation All rights reserved. No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation. ZTE operates a policy of continuous development. We reserve the right to update the technical specifications in this document at any time without prior notice. Release V1.
Contents GENERAL INFORMATION ................................................................................................................ 4 WELCOME ............................................................................................................................................. 4 SECURITY .............................................................................................................................................. 4 SAFETY PRECAUTIONS ...........................................
Voice Mail Server....................................................................................................................... 13 Broadcast Message .................................................................................................................. 13 SERVICES ............................................................................................................................................ 13 STK................................................................................
Safety Precautions This section includes some important information on safe and efficient operation. Please read this information before using the phone. Operational Precautions Please use your phone properly. When making or answering a call, please hold your phone as holding a wire line telephone. Make sure that the phone is at least one inch (two point five centimeters) from your body when transmitting. Do not touch the antenna area when the phone is in use.
Do not connect the phone with any incompatible enhancement. Do not attempt to disassemble the mobile phone or battery. Do not store the phone with flammable or explosive articles. Do not charge the mobile phone without battery. Precautions for Potentially Explosive Atmospheres Switch off your phone prior to entering any area with potentially explosive atmospheres, such as fueling areas, fuel or chemical transfer or storage facilities.
The radio wave exposure guidelines employ a unit of measurement known as the Specific Absorption Rate, or SAR. Tests for SAR are conducted using a standardized method with the phone transmitting at its highest certified power level in all used frequency bands. While there may be differences between the SAR levels of various ZTE phone models, they are all designed to meet the relevant guidelines for exposure to radio waves. The SAR limit recommended is 1.6W/kg averaged over one(1) gram of tissue.
Divert All Voice Calls Alarm clock Keypad lock Mute General mode Vibration Outdoor mode New message; no space for messages when blinking New MMS Stopwatch Headset mode Battery charge level Technical Parameters Handset Type ZTE A261+ Dimensions（W×L×H） 46.8 mm×108.5 mm×13.3 mm Weight Approx. 74 g (with battery) Battery Continuous standby time Approx. 120 hours – 200 hours (subject to network status) Continuous talk time Approx.
Put the phone at a ventilated place with temperature between + 5℃ and + 40℃. Use only the supplied or approved chargers. Using unauthorized charger may cause danger and violate the authorization and warranty rules of the phone. Charge the battery in time when your phone automatically powers off or displays a warning “Battery low”. The talk time and standby time of the phone lie on ideal working environments.
Press the Up/Down/Left/Right key to enter Audio Player/ Multimedia /User Profiles/Write Message, respectively. Note: If “Emergency” is shown on the screen, you can only make emergency calls. In the standby mode, press the Left soft key/OK key and then Press the * key within two seconds to lock the keypad. The unlock method is the same. Locking the keypad can prevent the unintentional operations on it. You can answer an incoming call with the regular operation when the keypad is locked.
Call History Missed Calls/ Dialed Calls/ Received Calls You can view the missed calls, dialed calls, and received calls. Delete Call Log You can delete the call logs. Call Time You can view the call time. Call Cost The call cost depends on the Price Per Unit, which you have to enter the PIN2 to set first. For the exact cost please refer to the service provider.
Messages If the network supports and you have subscribed this service, you can use this function. Please contact your service provider for details. SMS Set a message service center number in Message Settings-Profile Setting before sending messages. ¾ Write Message: Create a new SMS. ¾ Inbox: You can read the received messages. In the Message Body interface, you can press Option to make more operations. ¾ Outbox: If you select Save and Send, the successfully sent out SMS will be saved in Outbox.
z Slide Timing: Set the slide time. When there is more than one slide, it will automatically turn to the next slide when the previous slide has been displayed for the set slide time. When there is only one slide, the display will be stopped after the set time. z Delivery time: Set the delivery time. Retrieve z Download Mode: Set to download the MMS automatically, manually, or reject to download. z Read Report: Select whether or not to send a read report.
Settings Phone Setup ¾ Time and Date: Date can be set from January 1st, 2000 to December 31st, 2030. Time can be set from 00:00 to 23:59. Set the time and date displayed format. ¾ Schedule Power On/Off: Enable or disable this function to automatically power on/off the phone at the set time. ¾ Language: Select the language for the display texts. ¾ Display Characteristic: Set a series of display Characteristics. ¾ Contrast: Set the parameter for the lighteness.
¾ Fixed Dial: You can enable or disable fix dialing to specified phone numbers only. You must enter your PIN2 code for authentication. ¾ Change Password: You can change PIN code, PIN2 code and Phone Lock Password. Restore Factory Settings Enter Phone Lock password to restore to the factory settings. Camera You can take pictures and edit the parameters. Image Viewer You can view the images in the folder, and set the storage.
Note: The Silent mode has no Customize menu. The Headset mode can only be activated with the headset connected. In Headset mode, there is one more answer mode: Auto. If Auto is On, an incoming call will be automatically connected in 5 seconds. Text Input Overview Your mobile phone provides the following input methods: upper and lower case input, numeric input and predictive text input, punctuation mark or special characters input.
9 WXYZwxyz9 0 Space 0 * key Press the * key to bring out symbols. # key Switch among different input modes. Up/Down key Roll the cursor up/down. Left/Right key Roll the cursor left/right. Clear key Clear the previous character. Hold the Clear key to clear all the characters. End key Exit Troubleshooting This section describes how to troubleshoot some problems when they occur to your phone. If you cannot deal with them, contact your local dealer. 1.
