ZXR10 ZSR V2 Intelligent Integrated Multi-Service Router Safety Precautions Version: 2.00.20 ZTE CORPORATION No. 55, Hi-tech Road South, ShenZhen, P.R.China Postcode: 518057 Tel: +86-755-26771900 Fax: +86-755-26770801 URL: http://support.zte.com.cn E-mail: support@zte.com.
LEGAL INFORMATION Copyright © 2015 ZTE CORPORATION. The contents of this document are protected by copyright laws and international treaties. Any reproduction or distribution of this document or any portion of this document, in any form by any means, without the prior written consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by contractual confidentiality obligations.
Contents About This Manual ......................................................................................... I Chapter 1 Personal Health and Safety Information................................. 1-1 1.1 Hazard Symbols................................................................................................. 1-1 1.2 General Safety Precautions ................................................................................ 1-2 1.3 Electric Shock Hazards.............................................
This page intentionally left blank. II SJ-20150204153047-002|2015-03-30 (R1.
About This Manual Purpose This manual describes the personal health and safety information and system safety information that apply when you work with ZTE system products. The information contained herein is subject to your local laws and regulations. Note: This manual must be read carefully before working to minimize the risk of personal injury. For any personal safety or system safety questions, consult your supervisor or your local ZTE office.
This page intentionally left blank. II SJ-20150204153047-002|2015-03-30 (R1.
Chapter 1 Personal Health and Safety Information Table of Contents Hazard Symbols.........................................................................................................1-1 General Safety Precautions........................................................................................1-2 Electric Shock Hazards ..............................................................................................1-2 Energy Hazards ...................................................................
ZXR10 ZSR V2 Safety Precautions Hazard Symbol Meaning RF exposure hazard Symbol: Beware of strong electromagnetic field. Heat hazard symbol: Beware of heat source or hot surface that can cause burns. 1.2 General Safety Precautions Educational Requirements All personnel who work with ZTE products must meet the following requirements: l l Only well-trained personnel are allowed to install, configure, operate, and maintain ZTE products.
Chapter 1 Personal Health and Safety Information Danger! Improper electrical installation can result in fire, electric shock, or explosion that is likely to be fatal. Only qualified electricians are allowed to install or modify electrical equipment. Danger! Avoid direct or indirect contact with parts connected to the main power supply because this is likely to be fatal. Danger! Always shut off the power supply before connecting or disconnecting a power cable.
ZXR10 ZSR V2 Safety Precautions 1.5 Fire Hazards Danger! If a fire occurs and is out of control, evacuate the building or equipment site immediately. Raise the nearest fire alarm, or call the emergency number. Do not re-enter a burning building under any circumstances. Failure to comply can result in serious personal injury or death. Caution! Do not expose the equipment to combustible or explosive gases or fumes, or operate the equipment in such an environment.
Chapter 1 Personal Health and Safety Information Caution! Do not touch the heater or directly contact the heater vents when the heater is in operation. Failure to comply can result in burns. 1.7 Mechanical Hazards A mechanical hazard refers to a hazard that is caused by sharp edges or rotating blades in equipment. This section provides instructions and information on how to avoid mechanical hazards. Caution! Do not put fingers or any tools in an operating fan because this can result in personal injury.
ZXR10 ZSR V2 Safety Precautions Caution! Do not place the equipment on a floor with a tilting angle of more than ten degrees. Failure to comply can result in personal injury. 1.8 Laser Hazards Warning! Do not look directly into or keep your eyes close to the end of an optical fiber. Failure to comply can result in permanent eye damage. General laser precautions are described as follows: l l l Only specially-trained personnel are allowed to work with laser.
Chapter 1 Personal Health and Safety Information l l Do not operate base station antennas in an equipment room. Broken or disconnected RF cables can result in exposure levels exceeding specified safety limits. Repair or reconnect such cables before starting work. 1.10 Hoisting Heavy Objects General Information Danger! Falling objects can result in serious or even fatal injury. Always wear a safety helmet. Never stand or walk under an object that is being lifted. Warning! The equipment is heavy.
ZXR10 ZSR V2 Safety Precautions This page intentionally left blank. 1-8 SJ-20150204153047-002|2015-03-30 (R1.
Chapter 2 System Safety Information Table of Contents Hazard Symbols.........................................................................................................2-1 General Safety Precautions........................................................................................2-1 Batteries.....................................................................................................................2-2 Electrostatic Protection..............................................................
ZXR10 ZSR V2 Safety Precautions l l l Install the grounding cables first when installing the equipment, and remove the grounding cables last when removing the equipment. Never operate the equipment without grounding. The equipment must be connected permanently to the protective ground.
Chapter 2 System Safety Information l l Sodium bicarbonate (baking soda): NaHCO3 Sodium carbonate (soda): Na2CO3 2.4 Electrostatic Protection Electrostatic Protection in Equipment Operations Warning! An Electrostatic Discharge (ESD) wrist strap must be used to prevent the equipment from being damaged when you operate the equipment.
ZXR10 ZSR V2 Safety Precautions Electrostatic Protection in Equipment Storage and Handling Caution! When storing or handling circuit boards or other parts, use the original package or other antistatic materials for electrostatic protection. Failure to comply can result in equipment damage. 2-4 SJ-20150204153047-002|2015-03-30 (R1.
Chapter 3 FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy. However, there is no guarantee that interference will not occur in a particular installation.
ZXR10 ZSR V2 Safety Precautions This page intentionally left blank. 3-2 SJ-20150204153047-002|2015-03-30 (R1.
Glossary EME - Electromagnetic Energy ESD - Electrostatic Discharge PPE - Personal Protective Equipment I SJ-20150204153047-002|2015-03-30 (R1.