ZOTAC ZBOX nano ZOTAC ZBOX nano User’s Manual No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ZOTAC.
ZOTAC ZBOX nano Table of Contents Product specifications-----------------------------------------------------------------------------------------3 Safety information-----------------------------------------------------------------------------------------------4 Setting up your system--------------------------------------------------------------------------------------4 Care during use-----------------------------------------------------------------------------------------------4 Welcome-------------------
ZOTAC ZBOX nano Product specifications Processor • Intel Core i7-10510U (quad-core 1.8GHz, up to 4.9GHz) for ZBOX MI662NANO • Intel Core i5-10210U (quad-core 1.6GHz, up to 4.2GHz) for ZBOX MI642NANO • Intel Core i3-10110U (dual-core 2.1GHz, up to 4.1GHz) for ZBOX MI622NANO Onboard graphics • Intel UHD Graphics • Intel Quick Sync Video • HDMI 2.0 (max resolution: 3840x2160 @60Hz) • DP 1.
ZOTAC ZBOX nano Safety information Your ZOTAC ZBOX nano is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety instructions. Setting up your system Read and follow all instructions in the documentation before operating your system. Do not use this product near water or a heat source such as a radiator. Set up the system on a stable surface.
ZOTAC ZBOX nano Welcome Congratulations on your purchase of the ZOTAC ZBOX nano. The following illustration displays the package contents of your new ZOTAC ZBOX nano. If any of the below items is damaged or missing, contact your retailer.
ZOTAC ZBOX nano Getting to know your ZOTAC ZBOX nano Front view 5 6 7 9 1 2 3 4 8 Refer to the diagram below to identify the components on the front of the ZBOX nano 1. Power button The power button turns the system ON and OFF. 2. Power LED The Power LED is always ON when power is on. 3. SATA status LED The SATA LED blinks when data is being written onto or read from the SATA. 4. Wi-Fi status indicator The Wi-Fi LED is always ON when data is being transfered over Wi-Fi. 5.
ZOTAC ZBOX nano Rear view 2 1 4 6 3 3 5 Refer to the diagram below to identify the components on the back of the system. 1. WiFi antenna connector The WiFi antenna connector supports the included WiFi antenna. 2. Ethernet ports The eight-pin RJ-45 LAN port supports standard Ethernet cable for connections to local area networks (LAN) with speeds of 10/100/1000Mbps. 3. USB 3.1 ports The USB 3.1 port supports the SuperSpeed USB 3.1 devices and is backwards compatible with USB 3.0/2.0/1.1 devices.
ZOTAC ZBOX nano Customizing the ZOTAC ZBOX nano Before installing hardware, please follow the instructions below to remove the cover of your ZOTAC ZBOX nano. 1. Remove the four screws securing the bottom cover into place. 2. Remove the bottom cover.
ZOTAC ZBOX nano Installing a memory module 1. Locate the SO-DIMM memory slots and insert a SO-DIMM memory module into the slot at a 45 degree angle. Note: When installing two SO-DIMM memory modules, please insert a module into the lower slot first. 2. Gently press down on the memory module until it locks into place by the arms of the memory slot. Note: This ZOTAC ZBOX nano accomodates two DDR4 SO-DIMM memory modules. You must install at least one module for the system to function.
ZOTAC ZBOX nano Removing the memory module 1. Locate the SO-DIMM memory slot and gently press the two arms securing the memory module outwards, as shown in the image below, to release the memory module. 2. Remove the memory module from the slot at a 45-degree angle.
ZOTAC ZBOX nano Installing a hard disk drive 1. Locate the hard disk bracket, remove the 2 screws, and remove the hard disk bracket as shown in the image below. 2. Install the hard disk bracket onto a 2.5-inch SATA hard disk drive /SSD with 2 screws. *PLUS / Windows models include SSD pre-installed.
ZOTAC ZBOX nano 3. Insert the hard disk drive /SSD into the socket and gently slide into the connector. 4. Reinstall the screws for the hard disk bracket.
ZOTAC ZBOX nano Setting up your ZOTAC ZBOX nano Please connect your peripherals before using your ZOTAC ZBOX nano 2 1 3 4 3 5 6 1 2 3 4 5 6 1. Connecting the WiFi antenna Connect the WiFi antenna to the WiFi antenna connector. 2. Connecting to a network device Connect one end of a network cable to the LAN port on the system rear panel and the other end to a network hub, switch or router. 3. Connecting to USB 3.1 devices Connect USB 3.
ZOTAC ZBOX nano 4. Connecting a DisplayPort display Connect the DisplayPort connector to the DP port of the monitor or display. 5. Connecting to an HDMI display Connect one end of an HDMI cable to an HDTV or monitor, and the other end to the HDMI port on the system rear panel. 6. Connecting the power adapter and turning on the ZBOX nano Connect the supplied AC adapter to the DC IN jack on the system rear panel and then press the power switch on the front panel to turn on the system.
ZOTAC ZBOX nano Positioning the ZOTAC ZBOX nano • Do not position the ZOTAC ZBOX nano where the ventilation holes are covered. To guarantee proper use, leave 4 inches (10 cm) of spacing in front of the ventilation holes. • ZOTAC ZBOX nano mini-PC systems provide ample connectivity in a tiny form factor, please choose connectors and cables in appropriate sizes to avoid interference.
ZOTAC ZBOX nano 3. 16 Connect the ZOTAC ZBOX nano to your LCD monitor with an HDMI/DP cable.
ZOTAC ZBOX nano Installing drivers and software Installing an operating system The ZOTAC ZBOX nano does not ship with an operating system preinstalled. The user must install the operating system before the ZOTAC ZBOX nano can be used. The following operating systems are supported: • Windows 10 64-bit Follow the instructions below to install an operating system: 1. Attach external DVD drive via USB 3.1/USB 3.0 ports. 2. Insert disk for operating system (Windows or Linux). 3.
ZOTAC ZBOX nano • HDA Sound Driver • Intel Graphics Driver • Realtek Ethernet PCI-E Driver • Wireless Network Driver • Intel Management Engine • Bluetooth Driver • MassStorage Driver Each driver must be installed individually to ensure proper operation of the ZOTAC ZBOX nano. 3. Select the driver you want to install. The driver installer should launch. 4. Follow the onscreen instructions to install the drivers. 5. Restart the system.
ZOTAC ZBOX nano Configuring audio output Follow the steps below to enable audio output when connecting the ZOTAC ZBOX nano to a TV or receiver via DP/HDMI adapter. 1. Access the Sound settings via the system Control Panel. 2. Under Playback devices, click the display device that corresponds with your audio compatible display. 3. Click the “Set Default” button in the lower right hand corner. 4. Click “OK” to exit the setup.
ZOTAC ZBOX nano 20 291-MB418-00