Quick Start Guide Wireless Security Camera System For more information of your new system, please refer to www.zositech.com V6.P.01.
Contents EN 01 ES 13 FR 25 DE 37 IT 50 NL 62
1 What's in the Box 4*Camera 1*12V/2A NVR Power Adapter 4*12V/1A Camera Power Adapter 1*NVR 1*1m Ethernet Cable 4*Mounting Template 4*Warning Sticker 1*HDMI Cable 4*Mounting Screw Bag Quick Start Guide 1*Quick Start Guide 1*Mouse 1*Waterproof Lid NOTE: there are 4pcs cameras kit and 8pcs cameras kit. The amount of cameras, 12V/1A camera power adapters, mounting templates, mounting screw bags and warning stickers will be the same as the camera kit you purchase.
2 Gallery & Specs 2.1 NVR Antenna Antenna Network Port USB Backup HDMI Port VGA Port USB Mouse Audio Output Power Supply 2.
3 System Connection 3.1 Connect NVR to the Internet (1) Connect NVR to router using a network cable. (2) Connect monitor to NVR via HDMI or VGA port. (3) Connect the included USB mouse to the top USB port of NVR. (4) Connect NVR to 12V power supply. (5) After the system starts, pair and connect IPC and camera to the system (maximum support 8 channels). (6) The monitor will show the real-time monitoring picture of the camera.
A: Camera Installation Diagram 1. Mount the antenna 2. Insert wall plugs into the holes 3. Install the camera 4. Adjust the angle 5. Tighten screws 1. Screw the antenna onto the camera. Please keep the antenna vertical for best reception. Note: fold the camera bracket before installing the antenna so you can easily install the antenna as shown in the picture. 2. Drill a hole on the wall according to mounting template, and insert wall plugs into the hole. 3.
C: WiFi Setup Right-click the main interface - Main Menu - Setup - Network - Wireless Network, default setting and apply. 3.
4 AVSS PC Client 4.1 Install AVSS on PC Get the AVSS software from www. zositech.com or from your agent. Double-click the icon AVSS to open, select the language and click Login. Note: You can log in with the default username and password, or register a new account. The user name is the account and password registered on the Zosi Smart App. 4.2 Device Management Click the Add Device button in the device list to add/edit/configure/search for the device.
4.3 Live View 4.4 Video Playback Select channel to watch live streaming. Select ‘Playback’, select device, channel, date, time, click the play button to start replaying recorded video. 5 Add Device 5.1 Add IPC to wireless camera system (1) Connect IPC and NVR in the same wireless network. (2) Right-click the mouse on the live channel page and get the main menu. (3) Click IPC Channel Config to enter the configuration page. (4) Click the search button to search for IP cameras.
(5) Tick the IPC channel, click WiFi add. (6) The IPC device is successfully added and it can be displayed in live view channel and operated.
6 Hard Drive/ Micro SD Card Some camera kits may not contain hard drives, depending on the camera kit you purchase. This kit support most 3.5” HDD. NOTE: Please skip this step if your recorder has a pre-installed hard drive. 1. Remove the top cover 2. Hard disk wiring 3. Fix Hard drive 4. Assemble the cover ① Power off the NVR, unscrew and remove the top cover of recorder. ② Connect the power cable and data cable of the hard drive to the corresponding ports in the recorder.
7 Video Record Right click the mouse > Go to Main Menu > Setup > Record You shall see the record settings for all channels. Modify the record setting based on your needs and apply the changes. 7.1 Motion Detection Set motion Detection, NVR will only record when motion or movement is detected. Right click the mouse > Main Menu > Setup > Alarm > Motion detection. The system starts recording when motion is detected by the camera, and the captured picture will show at the bottom left corner.
Previous Record: move to last recorded event Next Record: move to next recorded event Fast Forward: video can be played at different speed, from 1/4 times to 16 times. Rewind: Video play can be rewinded at 1 time, 8 times, 16 times and 32 times. Screen Display Mode: both single-screen and multi-screen are available. You can choose how many channels you want to playback at the same time. Channel without records presents blank screen. 7.
8 Live Video Display You can see picture display on the monitor normally, as the 4-channel picture shown in the figure. 9 FAQs Q:Why can't I search for devices when adding cameras? A:Make sure that the device and the mobile device are on the same LAN, otherwise please enter the device ID manually.