Wireless-N Router USER MANUAL
NOTICE This document contains proprietary information protected by copyright, and this Manual and all the accompanying hardware, software, and documentation are copyrighted. No part of this document may be photocopied or reproduced by mechanical, electronic, or other means in any form.
MENT Contents Contents ....................................................................................................................... 3 Installing the Wireless-N Router ............................................................................... 5 Package Contents .................................................................................................. 5 System Requirements............................................................................................
Using your 3G modem as a Backup ........................................................... 45 The DHCP Server Page............................................................................... 46 The Wireless Setting Page .......................................................................... 46 The Change Password Page start here ........................................................ 49 Configuring Forwarding Rules ...................................................................
1 Installing the Wireless-N Router Package Contents The package contains the Zoom Wireless-N Router, an RJ-45 Ethernet cable, a 5V 1.2A Power adapter, a Quick Start installation flyer, and a CD that contains additional documentation and warranty information. If anything is missing or damaged, please contact Zoom Customer Support or whoever provided the Wireless-N Router. System Requirements Any DSL or cable modem or modem/router that has an Ethernet port should work with the Wireless-N Router.
Some service providers do not want you to connect your mobile phone or tablet to a computer or router unless you have signed up for a data plan that allows data tethering. These plans are commonly called Data Tethering, Mobile Broadband Connect, 3G Mobile Hotspot, Phone as a Modem, or Laptop Connect. ¾ Your router only supports tethering with a USB cable. It does not support tethering over WiFi or Bluetooth®.
¾ Change other wireless settings such as your Wireless Network Name (SSID) or you wish to disable WiFi access to your router. Connecting a Modem or a non-Android based Smartphone or Tablet to Your Router 1 If you are using a mobile broadband USB modem to connect to the Internet, plug the USB modem into the router’s USB port (see 1.1).
7 router’s Ethernet cable between the router’s Ethernet port and your computer or other device’s Ethernet port, then re-boot the computer to make sure it knows that the Router is plugged in. Open your browser on your computer or other device and verify that you are able to connect to the Internet. If you are unable to connect, refer to the Troubleshooting Your Internet Connection section below. Otherwise go to Chapter 2, Using the Configuration Manager to learn how to: ¾ Enable Wireless Security.
configuration, insert the blunt end of a paper clip into the RESET hole on the side panel of the router. Hold the clip in place for seven (7) seconds. Please continue to Chapter 2. Chapter 1.
2 Using the Configuration Manager Your Wireless-N Router is preset with default values that meet the needs of most users. However, you can change these settings using the router's built-in Configuration Manager. Here are some reasons why you might want to use the Configuration Manager: • You have a DSL or cable modem. • You want to set or change some settings of your Router.
5 On the Toolbar, type admin (the default password) in the System Password field, then click Login. 6 By default the configuration manager is set to English. If you wish to change it to Spanish select Español from the drop down box on the Toolbar. When you log in, the Configuration Manager opens its Main Menu. • You should use the Configuration Manger’s Setup Wizard if any of the following apply to you. ¾ You wish to set up a Cable or ADSL modem to work with the Wireless-N Router.
¾ ¾ You want to set up the correct Time Zone. Setting the Time Zone is important if you plan to use Scheduling usage rules to limit access to the Internet during certain hours. See The Schedule Rule and Schedule Rule Setting Pages on page 68 for more information. You wish to change other wireless settings such as your Wireless Network Name (SSID) or you wish to disable WiFi access to your router. If any of these apply to you, see Launching the Configuration Manager’s Setup Wizard below.
Each of the six Steps guides you in configuring a specific setting or group of settings. When you click Next or Back, you move from one step to another. If there is a setting that you don’t want to change, simply click Next to go to the next setting. Step 1. Setup Login To view or change configuration settings, you must enter a password. Your router has a default password (admin) that was set by the factory and that you used to access the Configuration Manager initially.
To set the time zone, select the time zone that applies to your location from the dropdown menu, then click Next. Step 3. WAN Type Setup The WAN Type refers to the protocol used by your Internet Service Provider in establishing your Internet connection. By default, WAN Type is set to your Mobile Broadband USB modem. If that is what you want, you can select Next to skip this section.
Selecting the WAN Type Please check with your service provider if you read the discussion below and are still unsure which WAN Type to choose. • Static IP Address - Typically you have to request and pay extra for a static IP address, so this is not typically used. • Dynamic IP Address – This is only used by Cable modem users and by DSL modem users who are not using PPPoE.
• LAN IP Address This is the LAN IP Address of your router. Devices behind the router use this address as their default gateway. Most users will not need to change this address. • Static IP Address This is the IP address that is given to you by your service provider when you sign up for a Static IP address. This address identifies your Wireless-N Router when seen from the Internet. • Static Subnet Mask This is the router's subnet mask. Your service provider supplies this address.
Configuring the Dynamic IP Address The page shown below only appears if you select the Dynamic IP Address button on the Select WAN Type menu. Otherwise skip this section. • LAN IP Address This is the LAN IP Address of your router. Devices behind the router use this address as their default gateway. Most users will not need to change this address. • Host Name This is the name that identifies your Wireless-N Router. Some service providers require a host name.
• LAN IP Address This is the LAN IP Address of your router. Devices behind your router use this address as their default gateway. Most users will not need to change this address. • Username This is the PPPoE username supplied by your service provider. • Password This is PPPoE password supplied by your service provider. • Primary DNS This is the Domain Name System (DNS) server's IP address. Your service provider supplies this address, if needed. Most users should not need to enter a DNS value.
Go to Step 4. Wireless Settings on page 22. . Configuring PPTP The page shown below only appears if you select the PPTP button on the Select WAN Type menu. Otherwise skip this section. • LAN IP Address This is the LAN IP Address of your router. Devices behind your router use this address as their default gateway. Most users will not need to change this address. • IP Mode This is the mode used to generate the IP address.
supplies this information, if needed. • • PPTP Account This is the PPTP account name that your service provider assigned to you. PPTP Password This is PPTP password that your service provider assigned to you. Go to Go to Step 4. Wireless Settings on page 22. Configuring L2TP The page shown below only appears if you select the L2TP button on the Select WAN Type menu. Otherwise skip this section. • LAN IP Address This is the LAN IP Address of your router.
• • • This is the WAN Gateway IP address of the L2TP server. Your service provider supplies this address. Server IP Address/Name This is the name and IP address of the L2TP server. Your service provider supplies this information, if needed. L2TP Account This is the L2TP account name or user name supplied by your service provider. L2TP Password This is L2TP password supplied by your service provider. Go to Step 4. Wireless Settings on page 22.
this address. • APN This is the Access Point Name (APN) assigned by your service provider, if needed. • PIN This is the Personal Identification Number (PIN) code assigned by your service provider, if needed. • Dialed Number This number is assigned by your service provider, if needed. • Account This is the Account Name provided by your service provider, if needed. • Password This is the Password assigned by your service provider, if needed. Go to Step 4. Wireless Settings. Step 4.
you do not want wireless clients to access your network. • Wireless Network Name (SSID) refers to the Service Set Identifier for your device. By default, the SSID for the Wireless-N Router is Zoom. You can change the SSID to a name of your choice. The SSID can be up to 32 alphanumeric characters. If you change the name, make sure that all devices on your Wireless-N Router’s wireless network use the new SSID as the access point. • Channel refers to the wireless network channel assigned to your LAN.
dropdown menu. Important: Be aware that WEP is a basic authentication service and is not as secure as WPA-PSK/WPA2-PSK. If you have devices on your wireless network that support only WEP (for example, some gaming consoles), you will need to select WEP as your Authentication method. WPA-PSK/WPA2-PSK Authentication We recommend this setting if all devices on your network support either WPA or WPA2. Your router will automatically detect whether it should use WPA or WPA2.
WEP Authentication and Encryption If you have devices on your wireless network that support only WEP (for example, some gaming consoles), you will need to select WEP as your Authentication method. When you select WEP from the Authentication dropdown menu, the Encryption field expands, as shown in the following figure.
Encryption WEP Key 1, 2, 3, 4 You can choose to either use WEP 128 bit encryption or WEP 64 bit encryption. The difference is 128 bit is more secure and 64 bit is faster. We recommend selecting 64 bit. If you selected Hex format and you chose a 64-bit key length, 13 hexadecimal values are required. (Hexadecimal values include the numbers 0-9 and the letters A-F) Write the 13-hexadecimal key in the space below for future reference, and then enter it in the Key 1 box.
1 2 3 To edit your entries, click Back as many times as needed to access the page for the field(s) to be edited, then click Next to continue with your edits or to return to the updated Summary page. Mobile Broadband: To test the updated configuration on your network, click the checkbox next to Do you want to proceed with the network testing? When you're satisfied with the configured settings, click Apply Settings to save the new configuration.
Step 6. Finish The Finish page displays the saved configuration settings for your router. Click Finish to exit the Setup Wizard and return to the Main Menu. In the unlikely event that you want to use the Advanced configuration program to tailor the router's configuration to your needs, for example, to set up a Virtual Server or DMZ so that your games or gaming consoles can access the Internet through your router's firewall, please continue to Chapter 5: Using the Configuration Manager's Advanced Program.
3 Connecting Devices Wirelessly to the Wireless-N Router This chapter assumes that your Wireless-N Router has its wireless security settings set up the way you like them, either with the factory default of “no security” or with a particular type of security as discussed in Chapter 2. This chapter provides tips for connecting devices (computers, phones, tablets, game stations, etc.) wirelessly to the Wireless-N Router.
Connecting a Windows 7 Computer with Built-in Wireless Capabilities 1 From the taskbar, click on the wireless symbol. 2 In the wireless network options box, highlight the Wireless Network Name(SSID) you gave your wireless network in Step 4 of the Setup Wizard. If you did not change the Wireless Network Name(SSID), select the default name Zoom. If you want to automatically connect to the Wireless-N Router, click the Connect Automatically box. Then click Connect.
Connecting a Windows Vista Computer with Built-in Wireless Capabilities 1 2 From the Start menu select Connect to. In the Connect to a network dialog box, highlight the Wireless Network Name (SSID) you gave your wireless network in Step 4 of the Setup Wizard. If you did not change the Wireless Network Name(SSID) select the default name Zoom and click Connect. • If your desired network is secured, in the next dialog box enter the security key or password and click Connect.
4 In the next dialog box, you can connect to another network or click Close to complete the disconnect procedure. Connecting a Windows XP Computer with Built-in Wireless Capabilities 1 2 On your Windows desktop, click the Wireless Network Icon in the System Tray. Windows will automatically scan for available wireless networks in your area. Any compatible networks within range will appear in the Available networks list.
Tip! If you need help, refer to the documentation that came with your wireless device. There are several site scan issues you should be aware of: ¾ More than one wireless network may appear in the list. These are other wireless networks that are within range of your network. Your neighbors, for instance, may be within range of your network. Each wireless network has a channel associated with it. We recommend there be at least a five-channel difference between your network and those of your neighbors.
¾ Windows 7, XP, and Vista users: If you installed a wireless adapter on a Windows 7, XP, or Vista computer, Windows may try to automatically configure the adapter (rather than let you use the software provided with the wireless adapter). You will know this is happening because you will be prompted with a message about one or more wireless networks being available. You will also be able to click a link to open the Wireless Network Connection Properties dialog box.
Method One Use this method if your client device has a WPS button. This button can be either a physical button on the unit or a software button in its application. 1 Press the WPS button on your Wireless-N Router and hold it in for seven (7) seconds until the Wireless LED starts blinking rapidly. Important! The Registrar (the device configuring the WLAN) goes into the WPS mode and the Enrollee (the device joining the WLAN) then looks for it. You should always start the Registrar first.
f Click Trigger to start the connection process on the router. g On the router, when the program displays a message that the process succeeded, click SET to keep the router from receiving new configuration parameters from another WPS Registrar. h Click Save to save the configuration.
4 Configuring Wireless Security Manually Note: Most users will not need to read this chapter. Most users either use the Wireless-N Router’s default settings (“no wireless security”) or use the Setup Wizard described in Chapter 2 to set wireless security. We recommend you set WPA2/WPA security unless you know that you will be connecting devices to your network that support only WEP. If you know you have some devices that only support WEP, go to WEP Configuration on page 40.
5 In the Authentication drop down bar select WPA – PSK/WPA2 – PSK. If you know all your devices support WPA2-PSK you can select it instead. 6 In the Security Key field enter a value for the key. The maximum value is 64 characters. The minimum value is 8 characters. 7 Write down this passphrase and put it where you can find it – on the bottom of the Wireless-N Router case, for instance. 8 Click Save. 9 Now you need to set up each of your wireless devices with the Security Key that you entered.
http://192.168.2.1 and then click Enter. When the MAIN MENU opens for the first time, it displays a System Status page that summarizes the current settings and values for your system. 3 On the Toolbar, type admin (the default password) in the System Password field, then click Login. 4 When you log in, the Configuration Manager opens. Select Advanced from the Administrator’s Main Menu bar then click Wireless on the left hand menu. 5 In the Encryption drop down bar select WEP.
9 Now you need to set up each of your wireless devices with the Key that you entered. See Establishing your Wireless Network on page 29 for instructions on connecting devices to the Wireless-N Router.
5 Using the Configuration Manager's Advanced Program Most users will not need to manually set up their router. In the unlikely event that you do, you can use the Configuration Manager's Advanced program to change the router's default settings.
¾ You want to back up router settings that you made using the Configuration Manager. See The Backup Setting Dialog on page 72 for details. Online Help The Advanced program provides both online and context-sensitive help that guides you in changing the settings on each menu. ¾ To access online help, click [HELP] on the menu's Toolbar. Each [HELP] page describes the fields on the active page and, when applicable, the required or recommended entries.
6 On the Basic Settings page, click one of the Toolbar buttons (Basic Settings, Forwarding Rules, Security Settings, Advanced Settings, or Toolbox). The corresponding window opens. Each window contains a description of the configuration options at center and a configuration menu on the left pane. Configuring Basic Settings The Basic Settings page lists the four configuration menus on the left pane and provides a description of the configuration menus at center.
LAN IP Address The local IP address of the router. 192.168.2.1, by default. All wireless or wired devices on your network must use the LAN IP address of your router as their default gateway. 3G Failover See Using your 3G modem as a backup on page 45 for instructions on using 3G Failover. WAN Type Set to LTE / 4G / 3G, by default. You can choose another option from the dropdown menu, based on the WAN connection type that your service provider supports.
to http://www.zoomtel.com/mbsettings. Authentication Set to Auto, by default. Optionally, click Password Authentication Protocol (PAP), or Challenge Handshake Authentication Protocol (CHAP), if supported by your service provider. Primary DNS and Secondary DNS IP address of the Domain Name Servers. These addresses are provided by your service provider. Connection Control Specifies the method for connecting or disconnecting the WAN session based on network activity. Auto Reconnect (always on) is the default.
c From the Configuration Manager, click on Advanced and then Basic Setup and paste the IP address into the Internet host textbox. 5 Click Save. The DHCP Server Page You can use the DHCP Server page to configure your DHCP server. If you want to change the default values, please click [HELP], which opens a page that describes each item and the recommended values. The Wireless Setting Page You can use the Wireless Setting page to configure your wireless LAN setup.
Wireless Module Accept the default, Enable. Click the Disable checkbox only if you do not want wireless clients to access your network. Wireless Network Name(SSID) Refers to the Service Set Identifier for your device. By default, the SSID for the Wireless-N Router is Zoom. You can change the SSID to a name of your choice. The SSID can be up to 32 alphanumeric characters. If you change the name, make sure that all devices on your network use the new SSID as the access point.
For WEP Authentication: You can accept the default, WEP-Auto or select one of the available options. Select WEP-Open to use Open System authentication. Select WEP-Shared to use Shared Key authentication. For WPA-PSK/WPA2-PSK Authentication: You can select WPA-PSK/WPA2 PSK if your devices support both authentication methods. Optionally, select WPA-PSK or WPA2-PSK if all devices on your network support only one of these authentication methods.
If you selected ASCII format, and you chose a 64-bit key length, 5 ASCII characters are required. Write the 5-ASCII-character key in the space below for future reference, and then enter it in the Key 1 box. ————— Click WPS Setup to launch the WiFi Protected Setup (WPS) Setup program. For instructions, please refer to WPS Configuration on page 34. The Change Password Page You can use this page to change your login password. To view or change configuration settings, you must enter a password.
Port triggering works by sensing when data is sent out on the predetermined outgoing port and then automatically opening up the corresponding incoming port(s). It will automatically forward the traffic on the incoming port to the computer that accessed the outgoing port. If your game uses one port to send outgoing data and a different port (or ports) for incoming data, you may want to use port triggering.
A virtual server will allow access to your computer on certain ports. A port is like a channel that is used by applications (such as games) to communicate on. For example, the directions for the game you want to play over the Internet might tell you to open port 6000. Service Ports This is the port number you want to allow access to your computer on. To enter multiple ports use the dash format; for example, 2004-2009.
Use Rule# You can enable your virtual server for certain periods of time by assigning it a Rule #. You must first set up the appropriate Scheduling Rule. See The Schedule Rule and Schedule Rule Setting Pages on page 68 for more information. For example, if you have an FTP server (port 21) at 192.168.1.5, a Web server (port 80) at 192.168.1.6, and a game that requires port 5000 to be open at 192.168.1.7, then you need, at minimum, to specify the following mapping.
Enable Enables access for the specified application. Popular applications Provides a menu of applications from which to choose. Select an application and click Copy to to add the application to your list. Click Save to store your selection or Undo to remove the entry. The Miscellaneous Page The Miscellaneous Page lets you set up and enable a DMZ Host on your network, and enable UPnP settings for software and devices.
Set IP Address of DMZ Host A DMZ (Demilitarized Zone) Host is a host without the protection of the firewall. It allows a computer or gaming system to be exposed to unrestricted two-way communication for Internet games, video conferencing, Internet telephony and other special applications. Use caution when using a DMZ because your firewall no longer protects the computer that is set up as a DMZ.
Status Page The Status page shows you the status of the inbound and outbound Packet Filters and the Domain Filters. Inbound, Outbound, and Domain filters are disabled, by default.
Packet Filtering Page Packet Filtering allows you to control what packets are allowed to pass through the router. Outbound Packet filters control outbound packets and Inbound Filtering controls packets coming from the Internet. Inbound Filters applies only to packets going to a Virtual Server or DMZ. Most users will not need to setup Packet Filtering. When you click on Packet Filters from the left-side menu, it takes you to the Outbound Packet Filtering page.
Filtering Policies You can select one of the two filtering policies: Allow all to pass except those that match the specified rules Deny all to pass except those that match the specified rules Filtering Rules You can specify eight rules for each direction: inbound or outbound. For each rule, you can define the following: Source IP address Destination IP address Destination Port Use Rule# For the Source or Destination IP address, you can define a single IP address (4.3.2.1).
The Domain Filters Page You can use the Domain Filters page to enable or deny user access to specified URLs. Domain filtering and URL Blocking perform similar functions. The major difference between Domain Filtering and URL Blocking is that Domain Filtering requires the user to input a suffix whereas URL Blocking requires the user to input a keyword only. In other words, Domain Filtering can block a specific web site, whereas URL Blocking can block hundreds of web sites by specifying a keyword.
The action to be taken when a user accesses the restricted domain suffix URL. Check Drop to block access. Check log to record the attempted access. Enable Click the checkbox to enable a rule. The URL Blocking Page You can use the URL Blocking page to block LAN computers from connecting to pre-defined Web sites or to limit their access to specific websites.
Click the checkbox to enable each rule. The MAC Address Control Page You can use the MAC Address Control page to provide an added layer of security to your Wireless-N Router. MAC Address control is used to define connection and association rights for clients whose IP and MAC addresses are specified. Click on the HELP button page for a detailed explanation including examples for setting up MAC address control. MAC Address Control Check Enable to enable MAC Address Control.
Association control Check Association control to specify which wireless clients can associate to the wireless LAN. If a client is not allowed to associate to the wireless LAN, then the client can't send or receive any data via this device. Choose allow or deny to indicate which clients can associate to the wireless LAN. If selected, the specified wireless client will obtain any radio connection to the access point. DHCP clients Displays a list of computers that are currently connected to the router.
The System Log Page You can use the System Log page to define how and where system logs will be exported via syslog (UDP) or SMTP(TCP).
Host IP address of the destination where the Sys log will be sent. Click the Enable checkbox to set the IP Address as the destination. E-mail alert settings Check Enable if you want to send syslog via email.
SMTP Server IP and Port Input the SMTP server IP and port; for example, mail.your_url.com or 192.168.2.100:26. If you do not specify a port number, the port value will be set to 25. SMTP Username and Password Input the SMTP Username and Password. E-mail addresses The email address of each syslog recipient. E-mail Subject The subject of the email alert. This setting is optional. The Dynamic DNS Page You can use the Dynamic DNS page to define the Dynamic Domain Name Service (DDNS) that will host your server.
QoS Control Click the Enable checkbox to enable QoS. Available Upstream bandwidth Set the upstream speed. The best way to find your throughput is to use one of the free speed tests widely available on the Web. Some examples of sites with good speed tests are www.speedtest.net and www.speakeasy.net/speedtest. When you now your actual upstream throughput, enter it in this field. The value should be in kilobits per second (Kbps). Local: IP Define the local IP address of packets.
User Rule# Select a rule from the dropdown menu to indicate when the policy applies. (0) Always is the default value. The SNMP Page You can use the Simple Network Management Protocol (SNMP) page to set up the capability to remotely manage a computer network by polling and setting terminal values and monitoring network events. Most users do not need to set up SNMP. Enable SNMP Click the Local, Remote, or both checkboxes to enable the SNMP function.
that every IP address can get some information about this device, using the SNMP protocol. The Routing Table Page You can use the Routing Table page to enable/disable both Dynamic and Static Routing. If routing is enabled, you can specify which physical interface address to use for outgoing IP data grams. If you have more than one router and subnet, you will need to define a routing table that lets packets find the proper routing path and allows different subnets to communicate with each other.
Time Zone Select the local time zone from the dropdown menu. Auto-Synchronization Click the Enable checkbox to enable this function. Select an item from the Time Server dropdown menu to specify the server with which to synchronize. The default value is Auto. Click Sync with Time Server to set Date and Time by NTP Protocol. Click Sync with my PC to set Date and Time using your PC’s Date and Time Daylight Saving time Select enable if you live in an area that uses daylight savings time.
a. Click New Add to open the Schedule Rule Setting page. b On the Schedule Rule Setting page, specify a Rule name, a Policy that defines whether the rule is Active or Inactive, Week Day and the Start Time and End Time for each rule that you are creating.
c Click Save for each rule that you create. d Click Back to return to the Schedule Rule page. e When the Schedule Rule page opens, the rule(s) that you created and saved appear in the Rule Name column.
f Click Edit to make changes to a scheduled rule. g Click Delete to remove a scheduled rule. Configuring Toolbox Settings The Toolbox Settings page lists six configuration menus on the left pane and provides a description of the configuration menus at center. The System Information Page You can use the System Information page to view information about your router, and to view download, and delete system logs.
1 2 Click Browse to open the location where you saved the Firmware Update file that you downloaded from the Zoom web site or received via email. If you are restoring a saved configuration file, select the file that your configuration is saved in. Click Upgrade. The Backup Setting Dialog You can back up your router settings by clicking the Backup Setting item from the left pane of the Toolbox menu. The following dialog opens. 1 Click Save to write and save your router settings as a binary file.
1 Click OK to reset the router. We recommend that you back up and save your configuration first if you've made changes and want a record of that configuration The Reboot Dialog You can reboot the router by clicking the Reboot item from the left pane of the Toolbox menu. The following dialog opens. 1 Click OK to reboot the router. The Miscellaneous Page You can use this page to Ping a remote device on your network or to enable Power Saving in Battery mode.
Appendix A: Mobile Broadband Settings Your router works with a large number of different mobile broadband modem models. In most cases when you plug your mobile broadband modem or phone into the router, the proper APN (Access Point Name), Dialed Number, PIN Code, Username, and Password for the provider is automatically entered. In some cases, the modem does not know this information, and the router needs to be set up to include that information.
Cingular non-contract WAP@CING ULARGPRS. CINGULAR1 COM WAP.CINGULAR Check with provider Check with provider internet2.voicestre am.com guest guest internet3.voicestre am.com guest guest T-Mobile wap.voicestream.c non-contract om guest guest Check with provider Check with provider @vz w3g.com vzw Sprint Not Required #777 T-Mobile Check with provider *99# T-Mobile US GPRS Internet internet2.voicestre am.
BT Mobile Customer Value btmobile2.bt.com *99***1# bt bt abc abc Jersey Telecom pepper Jersey Telecom pepper Manx Telecom internet Meteor isp.mymeteor.ie my meteor O2 (1) with contract mobile.o2.co.uk web password O2 (2) with contract mobile.o2.co.uk o2web OR faster password O2 (1) faster, with contract mobile.o2.co.uk faster password O2 (2) faster, with contract mobile.o2.co.uk faster OR o2web password *99# *99# OR *99***1# *99# OR *99***1# O2 pre-pay payandgo.o2.co.
Vodafone contract wap.vodafone.co.uk wap wap Vodafone pre-pay pp.vodafone.co.uk wap wap Three UK three.co.uk guest guest Three Ireland 3ireland.
Appendix B: How to Set Up Tethering on the iPhone These instructions are based on using the iPhone in the USA with Verizon and AT&T, and may vary slightly depending on the model of your iPhone, your firmware version, and service provider. These instructions assume that you have a service contract that supports tethering. Please consult your iPhone user manual for more information. 1 2 3 Connect one end of the USB cable to the Router and the other end to the iPhone. Turn on tethering on the iPhone.
Appendix C: Registering Your Product and Getting Help Zoom supports this router. If you need assistance, please contact Zoom directly. We encourage you to register your product and to notice the many support options available from Zoom. Please go to www.zoomtel.com and select Technical Support. From here you can register your new router, contact our technical support experts, use our SmartFactstm intelligent database, and get warranty information.
Limited Warranty Zoom Telephonics, Inc. (hereinafter “Zoom”) warrants this product against defects in material and workmanship for a warranty period of one year. The one year warranty may be extended only by Zoom as required by local law in the country where this modem is sold by Zoom. This warranty applies to the original end-user purchaser.
FCC Part 15.21 information for user You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. FCC Section 15.105 Information to the user. NOTE: This equipment has been tested and found to comply with the limits for a lass B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Declaration of Conformity Déclaration de conformité / Declaración de conformidad Zoom Telephonics, Inc. 207 South Street Boston, MA 02111 USA 617-423-1072 www.zoomtel.com Zoom Wireless-N Router Manufacturer/Constructeur/Fabricante Brand/Marque/Marca Type/Typ/Tipo Series 1100, Model 4504, CDW531AM-002 The manufacturer declares under sole responsibility that this equipment is compliant to Directive 1999/5/EC, 2004/108/EC, 2006/95/EC via the following. This product is CE marked.
