2.0 BLUETOOTH 56K FAX MODEM Product Name: Bluetooth modem Model No.: 4300A, 4161A Applicant: Zoom Telephonics, Inc.
REGULATORY STATEMENTS FCC Certification The United States Federal Communication Commission (FCC) and the Canadian Department of Communications have established certain rules governing the use of electronic equipment. Part15, Class B This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interface, and 2. This device must accept any interface received, including interface that may cause undesired operation.
Index CHAPTE R 1 Introduction 1 CHAPTE R 2 Specifications 2 CHAPTE R 3 Product Shape 4 CHAPTE R 4 Bluetooth Modem Mode 6 CHAPTE R 5 Generic Modem Mode 38 CHAPTE R 6 How to use BTModemUtility 54 CHAPTE R 7 How to use Modem Country Region 64
1. Introduction The Bluetooth 56K wireless modem is a 56K modem equipped with Bluetooth function. It provides a standard V.92 Modem for WAN communication and access to Internet. With a Bluetooth adapter, you can dial up to access the network via this device wirelessly. Bluetooth technology brings you more freedom and mobility; it allows you to mobilize your PC within the effective range of this Bluetooth modem.
2. Specifications 2.1. Features V92 Modem • • • • • • ITU-T V.92 and K56flex V.34 (33.6 kbps), V.32 bis, V.32, V.22 bis, V.22, V.23, and V. 21; Bell 212A and 103 Flow control and speed buffering Automatic format/speed sensing V.22bis fast connect One RS232 connecter for Host PC (DTE) interface Bluetooth Function • Wireless interface complies with Bluetooth Core Specification V1.1 Main chip: CSR BlueCore 2 • Protocol: Bluetooth 2.
2.5. Environment Operating Ranges • • Operation : 0 ~ 50℃, Humidity 10 ~ 90% Storage : -20 ~ 90℃, Humidity 10 ~ 90% 2.6. Power Consumption • • Operation: 175mA / 6V (Avg), 220mA/6V (Max) Standby: 52mA/6V 2.7. LED Indication • • • • • • Power LED: Power ON/OFF Link LED: Bluetooth Link ACT LED: Bluetooth Active OH LED: Off-Hook TX LED: Data Transmit RX LED: Data Receive 2.8. Driver Support • • Windows 98SE/ME/2000/XP Mac O.S 10.
3.
1. Power LED indicator: Lights when the Bluetooth Modem powers on. 2. Link LED indicator: Lights when Bluetooth Modem is linked by a remote device. 3. ACT LED indicator: Blinks when data is transferring via Bluetooth connection. 4. OH LED indicator: Lights when Bluetooth Modem is dialing or gets connected. 5. 6. 7. 8. 9. TX LED indicator: Blinks when Bluetooth Modem is transmitting data. RX LED indicator: Blinks when Bluetooth Modem is receiving data.
4. Bluetooth Modem Mode 4.1. Getting Started 1. Turn the switch to "BT" side . 2. Connect the telephone line to the RJ-11 socket 3. Plug in the AC adapter to the power outlet.
4.2. How to dial-up under Widcomm Bluetooth Windows (BTW) The Following procedures are using the Bluetooth software as reference on how to use the Bluetooth Modem to access the Internet. The user should follow accordingly based on the Bluetooth software in hand. For Windows 98 1. Double click the "My Bluetooth Places" icon on the desktop. The following window wills pop-up. Double click the "Find Bluetooth Devices" icon.
2. Bluetooth software will start searching the surrounding remote devices. Find the "Bluetooth Modem" icon and then double click on it.
3. The service start discovery. 4. Then windows will ask you a 4-digit PIN Code to pair with the Bluetooth Modem. You can find the PIN Code on the bottom of your Bluetooth modem. The default Pin code is “1111”.
5. Key in the PIN Code and click the "OK" button. 6. When Bluetooth Modem has been paired, it will show 3 services. Double click on "Dial-up Networking on Bluetooth Modem" service icon.
7. When the connection is established, the service icon will change the color to green.
8. If you are using the dial-up connection first time, the following window will pop out. Type in the area code of your location, and then click the "Close" button. 9. The "Connect To" window will auto pop-up. Please key in the user name, the password, and the phone number. You can get the information form your ISP (Internet Service Provider) and then click the "Connect" button.
10.The Bluetooth Modem starts dialing. 11.Once the connection is established you can run a web browser.
For Windows ME 1. Double click the "My Bluetooth Places" icon on the desktop. The following window wills pop-up. Double click the "Find Bluetooth Devices" icon.
2. Bluetooth software will start searching the surrounding remote devices. Find the "Bluetooth Modem" icon and then double click on it.
3. The service start discovery. 4. Then windows will ask you a 4-digit PIN Code to pair with the Bluetooth Modem. You can find the PIN Code on the bottom of your Bluetooth modem. The default Pin code is “1111”.
5. Key in the PIN Code and click the "OK" button. 6. When Bluetooth Modem has been paired, it will show 3 services. Double click on "Dial-up Networking on Bluetooth Modem" service icon.
7. When the connection is established, the service icon will change the color to green.
8. If you are using the dial-up connection first time, the following window will pop out. Type in the area code of your location, then click the "Close" button. 9. The "Connect To" window will auto pop-up. Please key in the user name, the password, and the phone number. You can get the information form your ISP (Internet Service Provider) and then click the "Connect" button.
10.The Bluetooth Modem starts dialing. 11.Once the connection is established you can run a web browser.
For Windows 2000 1. Double click the "My Bluetooth Places" icon on the desktop. The following window wills pop-up. Double click the "Find Bluetooth Devices" icon.
2. Bluetooth software will start searching the surrounding remote devices. Find the "Bluetooth Modem" icon and then double click on it.
3. The service start discovery. 4. Then windows will ask you a 4-digit PIN Code to pair with the Bluetooth Modem. You can find the PIN Code on the bottom of your Bluetooth modem. The default Pin code is “1111”.
5. Key in the PIN Code and click the "OK" button. 6. When Bluetooth Modem has been paired, it will show 3 services. Double click on "Dial-up Networking on Bluetooth Modem" service icon.
7. When the connection is established, the service icon will change the color to green.
8. The "Connect To" window will auto pop-up. Please key in the user name, the password, and the phone number. You can get the information form your ISP (Internet Service Provider) and then click the "Connect" button. 9. The Bluetooth Modem start dialing.
10.Once the connection is established you can open your web browser.
For Windows XP 1. Double click the "My Bluetooth Places" icon on the desktop. The following window wills pop-up. Click the "View devices in range" item in "Bluetooth Tasks".
2. Bluetooth software will start searching the surrounding remote devices. Find the "Bluetooth Modem" icon and then double click on it.
3. The service start discovery. 4. Then windows will ask you a 4-digit PIN Code to pair with the Bluetooth Modem. You can find the PIN Code on the bottom of your Bluetooth modem. The default ping code is “1111”.
5. Key in the PIN Code and click the "OK" button.
6. When Bluetooth Modem has been paired, it will show 3 services. Double click on "Dial-up Networking on Bluetooth Modem" service icon. 7. When the connection is established, the service icon will change the color to green.
8. The "Connect BluetoothConnection" window will auto pop-up. Please key in the user name, the password, and the phone number. You can get the information form your ISP (Internet Service Provider) and then click the "Dial" button. 9. The Bluetooth Modem starts dialing. 10.Once the connection is established you can open your web browser.
4.3. How to use dial-up network under MAC O.S. 10.3 1. To use dial-up network function under MAC O.S.10.3, first from “system preference” click hardware ”Bluetooth” icon 2. System will show the “Bluetooth” windows, please click “Devices”Æ”Set Up New Device” start setup with “Bluetooth setup assistant”.
3. At “Bluetooth Setup assistant” welcome screen please click “Continue” to next step. 4. In this step please “Other Device” in “Select Device Type” window and click “Continue” button to next step.
5. In this page please select “bt56r3” in “Devices” window and click “Continue” button to next step 6.
7. In “Bluetooth Mobile Phone Set Up” page please select the service with your phone click “Continue” button to next step 8. In this page you should key in your ISP “Username”, “Password”, and ”Phone number” and remember change Modem Script to “Hayes Accura 56K” and click “Continue” button to next step.
9. In this page you are complete your Bluetooth dial up network setting, please click “Quit” button to finish “Bluetooth setup assistant”. 10.To use you dial-up network function please click phone icon on takes bar, and click “Connect”, please mark sure “Bluetooth” is selected. 11.The connected time will show on next the phone icon, if you went to disconnect the connection just click “Disconnect”.
5. Generic Modem Mode 5.1 Getting Started 1. Turn the switch to "RS-232" side . 2. Connect the telephone line to the RJ-11 socket. 3. Plug in the RS-232 cable male connector to RS-232 connector of Bluetooth Modem and plug in the female connector to your PC. 4. Plug in the AC adapter to the power outlet.
5.2 Driver Installation under Windows For Windows 98 1. Make sure your PC is powered on and you are running the Windows operating system. Then system will recognize the device and display the "Add New Hardware Wizard" dialog box. Please insert the driver CD and then click the "Next" button.
2. Select "Search for the best driver for your device (Recommended)", then click the "Next" button. 3. Select "Specify a location" and type "G:\Modem" (where G:\ is the path of your CD-ROM drive) in the location or you can click the "Browse" button to select, and then click the "Next" button.
4. Please click the "Next" button, the driver then installs itself. 5. Click the "Finish" button to complete the installation process.
For Windows ME 1. Make sure your PC is powered on and that you are running the Windows operating system. Then system will recognize the device and display the "Add New Hardware Wizard" dialog box. Please insert the driver CD and then click the "Next" button.
2. Select "Search for the best driver for your device." then choose "Specify a location" and type "G:\Modem" (where G:\ is the path of your CD-ROM drive) in the location or you can click the "Browse" button to select, then click the "Next" button. 3. Click the "Next" button, the driver then installs by itself.
4. Click the "Finish" button to complete the installation process.
For Windows 2000 1. Make sure your PC is powered on and that you are running the Windows operating system. Then system will recognize the device and display the "Found New Hardware Wizard" dialog box. Please insert the driver CD then click the "Next" button.
2. Select "Install the software automatically (Recommended)", then click the "Next" button.
3. Select "Specify a location" then click the "Next" button. 4. Type "G:\Modem" (where G:\ is the path of your CD-ROM drive) in the location or you can click the "Browse" button to select, then click the "Next" button.
5. Click the "Next" button, the driver then installs by itself. 6. Windows will search for and recognize the driver of the device, then display one message. Please click the "Yes" button. Windows will then automatically copy the driver files and related files into the system.
7. After copying the driver files, click the "Finish" button to complete the installation process.
For Windows XP 1. Make sure your PC is powered on and that you are running the Windows operating system. Then system will recognize the device and display the "Found New Hardware Wizard" dialog box. Select "Install from a list or specific location (Advanced)", insert the driver CD then click the "Next" button.
2. Select "Search for the best driver in these locations." and choose "Include this location in the search:" then type "F:\Modem" (where F:\ is the path of your CD-ROM drive) in the location or you can click the "Browse" button to select,. Click the "Next" button.
3. Windows will search for and recognize the driver of the device, then display one message. Please click the "Continue Anyway" button. Windows will then automatically copy the driver files and related files into the system. 4. After copying the driver files, click the "Finish" button to complete the installation process.
5.3 How to dial-up under Windows Please refer to the Windows Operating System user guide to setup a dial-up connection.
6. How to use BTModemUtility? This utility can change the name and Pin Code of the Bluetooth modem device. This utility can be found in the driver CD. (The path is: \Modem\Utility) Before you change pin code, please notes these steps. 1. Turn the switch to "BT" side . 2. Pull out and plug in the AC adapter to the power outlet to reset the modem. Now you can change your pin code. 3. If you forget your pin code, press the “Reset” button for 3 seconds and then release it.
56
6.2. Getting Started 1. Double click the "Serial port on Bluetooth Modem" icon to connect.
2. You can find the serial port number on the bottom of the screen. (In this case the Bluetooth serial Port is set at COM3). 3. We recommend you NOT to select “Do not display this message again”. That will allow you to find out your virtual COM port next time.
4. Then run the "BTModemUtility" from your CD path:\\Utility\BTModemUtility.exe. If you choose the wrong virtual COM port, it will show “Fatal Error: Receive data timeout.”, “Fatal Error: Failed to send data out.” or “Fatal Error: Cannot open the selected COM port.”. Please check your COM port in “step 2”.
5. You will see target device information on the screen. The default Pin Code is 1111. You can change the device name and a new Pin Code. Note: The device name and Pin Code have to be alphanumeric.
6. If you choose “Disable Authentication Requirement”, you won’t have to enter the Pin Code next time. Then press "OK", and "Exit".
7. After changing to a new device name or Pin Code, you must unpair the device. Note: Select the device and right click the mouse button to choose “Pair Device“or “Unpair Device“.
8. Then you select one of the Bluetooth Modem function. 9.
10.You will see the new device name in the request window, and you can enter the new PIN Code to complete the pairing process.
7. How to use Modem Country Region? This utility can change the country region of the Bluetooth modem device. This utility can be found in the driver CD. (The path is: \Modem\Utility) Before you change country region, please notes these steps. For RS-232 Mode 1. Turn the switch to "RS-232" side . And connect with your RS-232 cable. 2. “Scan for hardware changes” in Device Manager. 3. Choose “Install from a list of specific location (Advanced)”.
4. Choose “Search for the best driver in these locations”→”Include the location in the search”. And press ”Browse” to the path in CD-ROM.
5. Press “Continue Anyway”. 6. Press “Finish”.
7. Check your COM port in “Device Manager” → ”Property” → ”General”. (In this case the serial port is COM1). 8. Select your COM port.
9. Select your country. 10.Press “OK” to finish country region setting.
For BT Mode 1. Turn the switch to "BT" side . 2. Double click the "Serial port on Bluetooth Modem" icon to connect.
3. You can find the serial port number on the bottom of the screen. (In this case the Bluetooth serial Port is set at COM3). 4. We recommend you NOT to select “Do not display this message again”. That will allow you to find out your virtual COM port next time.
5. Select your COM port. 6. Select your country. 7. Press “OK” to finish country region setting..
