User's Manual

ManualsBrandsZoom Telephonics ManualsElectronics3G+ Freedom Modem

1 About WIRELESS USB MODEM

WIRELESS USB MODEM is a kind of online device which designed for the user who

may use mobile internet to get online, and the user may access to the internet at

anywhere and anytime.

2 Installation

To Insert (U)SIM Card

1. Push away the protecting cover of the product;

2. Insert the (U)SIM card into the socket (the golden contact side is downward )

according to the direction indicated in the sketch, and confirm the (U)SIM card is

inserted completely.

(1) (2)

To Insert Micro SD Card

1. Push away the protecting cover of the product;

2. Insert the Micro SD card into the socket according to the indicated direction and

confirm the Micro SD card is inserted completely.

Summary of content (8 pages)

PAGE 1
About WIRELESS USB MODEM WIRELESS USB MODEM is a kind of online device which designed for the user who may use mobile internet to get online, and the user may access to the internet at anywhere and anytime. 2 Installation To Insert (U)SIM Card 1. Push away the protecting cover of the product; 2. Insert the (U)SIM card into the socket (the golden contact side is downward ) according to the direction indicated in the sketch, and confirm the (U)SIM card is inserted completely.
PAGE 2
(1) (2) Connect the Computer and the WIRELESS USB MODEM 1. Rotate USB; 2. Insert MODEM device into the USB socket of the computer; 3. After correctly inserted, the installation procedure will automatically operate; if installation procedure can not pop up automatically, please open My Computer--MODEM Disk and then double click Modem_installation.exe to start installation. Moreover, in the course of installation, please do not disconnect the device; 4.
PAGE 3
Connect to Internet Set Up Connection 1. Click the button of button of under the main window to access the network, and then the will turn into the button of ; 2. Pop-up connection information window, indicating the success of network connection. If connection fails, please check APN setting. (Reference help file of customize the Internet Connection Configuration section). Disconnection Click the button of in main window to disconnect the network.
PAGE 4
5 Notes 1. If SMS sending fails, please confirm whether the number of SMS Center is correct or not. 2. If do not receive the SMS, please check whether the storage space of (U)SIM card is full or not. 3. The device will be brought about normal heat phenomena if used under the long-time working environment, weak signal or higher room temperature conditions, however, it does not affect the use and life of the device. 4. Please avoid contacting with the skin directly for a long time. 5.
PAGE 5
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. This USB Dongle complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PAGE 6
receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
PAGE 7
RF Exposure Information (SAR) This device meets the government’s requirements for exposure to radio waves. This USB Dongle is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.
PAGE 8
While there may be differences between the SAR levels of various USB Dongles and at various positions, they all meet the government requirement. The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/ea/fccid after searching on FCC ID: BDN3GM1085 .