Audio Transmitter for i-pod Quick Guide Product shape Connecting my Audio Transmitter 1. Insert the connector on the bottom of i-pod (Dock Connector). 2. Press the unit until it is firmly attached..
Audio Transmitter LED Indicator Mode LED Indicator Searching for last connected device Pairing in process Red and blue flashing Red/Blue alternate flash alternatively Connecting in process Slow Blue flash Pairing with Bluetooth headset device Before using your Audio Transmitter for the first time, you must pair it with a Bluetooth enabled headset prior to usage. The “Pairing” process creates a unique wireless link between two devices.
Adjusting the Volume User can adjust the volume up / down by 2 ways: 1. Adjust the volume up / down by the button on the transmitter. 2. Adjust the volume by the buttons on the headset Charging your i-pod and exchange data with PC You may charge the Li-ion battery of the i-pod by using the mini USB cable. at the same time, you can also exchange data if you connect it with a USB port on PC. Note: 1. To exchange the data with PC, the PC must installed i-tune on it. 2.
FCC statement in User's Manual (for class B) "Federal Communications Commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC Caution: 1.The device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2.This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. 3.
In addition to the requirements of Section 7.1.5 in RSS-Gen, the device's shall also contain the following or equivalent statement: “Privacy of communications may not be ensured when using this telephone”. If privacy is provided as a standard feature, the privacy notice may be omitted provided that full justification accompanies the equipment certification application for evaluation by Industry Canada.