User's Manual

ManualsBrandsZoom Telephonics ManualsElectronicsX6 Wireless ADSL/2/2+ Modem/Router

ADSL X6 User Guide 1

ZOOM ADSL X6

Quick Start

This Quick Start tells you how to install your X6 with a Windows

PC. Detailed information and installation instructions for

Macintosh and Linux are in the User Guide on the CD. The X6

requires that you have ADSL service, which is usually called DSL

in the USA.

1 Turn on the Windows computer that you will use for

setup. This can be any Windows Vista™, XP, 2000, Me or

98 computer with an available Ethernet port.

For Windows Vista only: You must follow these steps to turn on

Telnet Client:

a Click Start, select Control Panel, then double-click Programs and

Features.

b In Programs and Features, in the Tasks pane, click Turn

Windows features

on or off.

c At the User Account Control message, click Continue.

d In the Windows Features dialog box, select Telnet Client, click

OK, and wait

while the feature is configured.

e In the Uninstall or Change a Program window, click the Close box

to exit.

2 Close any open programs, including any antivirus software

or pop-up blockers.

3 Insert the supplied CD into the CD drive of your

computer. The CD should start automatically. (If the CD

does not start automatically, click the Windows Start button,

click Run, and then type E:\setup.exe, where E is the letter

of your CD drive.)

4 Follow the on-screen prompts for the Install Assistant.

Congra tulations! Your inst allat ion is c om ple te .

To test your installation, open your browser and go to a familiar

Web site. If your browser works, installation is complete for the

computer you used for setup. If you’d like, you can also connect

other computers to the X6, as discussed on the next page. If your

browser doesn't work, see the Troubleshooting Tips on page 3.

Summary of content (8 pages)

PAGE 1
ZOOM ADSL X6 Quick Start ® This Quick Start tells you how to install your X6 with a Windows PC. Detailed information and installation instructions for Macintosh and Linux are in the User Guide on the CD. The X6 requires that you have ADSL service, which is usually called DSL in the USA. 1 Turn on the Windows computer that you will use for setup. This can be any Windows Vista™, XP, 2000, Me or 98 computer with an available Ethernet port.
PAGE 2
Note: At this point, if you haven’t already done so, we recommend that you put an ADSL filter on every phone connected to the ADSL phone line. DO NOT put a filter between the X6 and the wall jack that it is connected to. (In some countries, including the UK, a splitter is supplied with the X6. The PHONE line plug of the splitter plugs into the wall jack that has ADSL service, and the X6 plugs into the splitter's MODEM jack, which is not filtered. The PHONE jack, for an optional telephone, is filtered.
PAGE 3
Conne c t ing Addit iona l Com put e rs t o t he X 6 You can connect other computers to the X6 two ways. You can use a wired connection by plugging an Ethernet cable between the Ethernet port of your computer (or game station) and any one of the X6’s four Ethernet (LAN) ports, or you can establish a wireless connection from another computer that has Wireless-B or Wireless-G capability. Wire d Et he rne t Conne c t ion 1 Shut down the computer or game station that you want to connect to the X6.
PAGE 4
instructions. You will need to know that admin is the User Name and zoomadsl is the Password (in lowercase letters). Se t t ing Adva nc e d Fe a t ure s The options that are set by default when your X6 is installed are sufficient for most users. However, those who want or need to change the X6’s settings can do so using the Advanced Setup page. To open this page, you first log in to the Zoom Configuration Manager: 1 Open your Web browser. Type 10.0.0.2 in the address bar then press Enter.
PAGE 5
Regulatory Inform ation U.S. FCC Part 68 Statement This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. The unit bears a label on the back which contains among other information a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company. This equipment uses the following standard jack types for network connection: RJ11C. This equipment contains an FCC compliant modular jack.
PAGE 6
• • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
PAGE 7
peuvent être raccordés à une interface téléphonique. La terminaison d'une interface peut consister en une combinaison quelconque de dispositifs, à la seule condition que la somme d'indices d'équivalence de la sonnerie de tous les dispositifs n'excède pas 5. Electrostatic Discharge Statement The unit may require resetting after a severe electrostatic discharge event. Safety Notices CAUTION: To reduce the risk of fire, use only the supplied phone cord or a No.
PAGE 8
Declaration of Conform ity Declaration of Conformity Overensstemmelseserklæring Conformiteitsverklaring van de EU Déclaration de conformité Konformitätserklärung ∆ήλωση Συμμόρφωσης Dichiarazione di conformità Deklaracja zgodnoś ci Declaração de Conformidade Declaración de conformidad Konformitetsdeklaration Cam kết về sự tuân thủ ở Châu Âu Manufacturer/Producent/Fabrikant/ Zoom Technologies, Inc.