User's Guide

HL60-L-GC-ZX Smart Pillow
User Guide
1. Operating Instructions
1.1 Turn on and Turn off
1.2 Temperature Control
1.3 Lighting Control
1.4 Bluetooth Music Playing
1.2.1 Shift by Button
Turn on：Connect device to the power to turn on.
This product is designed with four gears, which are displayed as below:
Fig.1 Light color cycle diagram
Users can directly switch gears by the button, and set corresponding target temperature cycle control in the order of”starting->green 37℃
->orange 42℃ ->purple47℃->red 52℃->shutdown “ The specific operation flow is shown in the following figure:
Every time the gear is adjusted,the device will be heated at full power. When the target temperature is reached ,the breathing light will be
turned on and kept at a constant temperature.
1.3.1 Night Mode
This device has a night mode, and if there is no operation within 30 seconds from 17:00 on the same day to 08:00 on the next day, the
lights will be automatically turned off in order to reduce the impact on the user’s sleep.
1.6.1 Arrangements
1 . Log in to the Tuya Smart APP.
1.6.3 Temperature Adjustment
Temperature adjustment : The annular area is the temperature adjustment operation area, and the user need to slide the pointer to adjust
the temperature . Turn off heating when the pointer slides off.
Stall : Different temperatures correspond to different gears and colors : green light(37℃~41℃)， orange light(42℃~46℃)，purple light
(47℃~51℃)and red(≥52℃).
1.6.2 Search and Connection
Manual adding method : click”+” in the upper right corner --select” add manually “--find the device to be added (the device name is
“Smart Sleep-assistance Pillow” ) ,” add it” --Click “+” --wait for connection -- after completion, the system will automatically enter the
device page.
2.Press and hold the device for 2s, wait for the blue light to flash, and then enter bluetooth pairing mode.
After entering the night mode, any key operation or APP operation will cause the machine to exit the night mode immediately.
See 1.6.6 Bluetooth music playing for more details.
1.5 Sleep Monitoring
Sleep monitoring is conducted from 18:00 on the same day to 12:00 on the next day. During this period , sleep data ( Mainly related
parameters of shallow sleep, deep sleep and rapid eye rotation) are recorded every half hour.
1.6 APP operation
Please search for “Tuya Smart App” in Android application market(If it is an Apple phone, please go to Apple Store), download and then
install it.
In order to ensure the accuracy of sleep monitoring data, please try to :
Note: Sleep data can only be kept on the device side for 3 days, so if the device is not used to connect to APP for 3 consecutive days,
the data of the earliest day may become inaccurate or lost. The acquired sleep data will be displayed on the “Sleeping” page of APP.
1. Connect the Tuya Smart App with the device before going to sleep at night and enter the “sleep”page；
2. After getting up the next day, please connect to the APP again and enter the “Sleep” page to synchronize the sleep data；
Note: It can be turned on by plugging to the power supply. By default, it will be heated at the 1st gear. When the temperature reaches 37℃,
the green breathing light will be turned on.
1st gear-green light(37~41℃);
2nd gear- orange light(42℃~46℃);
3rd gear-purple light(47℃~51℃);
4th gear-red light(52℃~57℃);
Turn off: Click the button circularly until the LED light goes out to turn off(Mainly used to turn off the heating function ).
Automatic adding method:click “+ “ in the upper right corner -- select “ automatic adding” -- search for the device ( the device name
is “ Smart Sleep-assistance Pillow”）“Next” --wait for connection -- the system will automatically enter the device page after completion.
37℃
Starting
Shutdown
42℃ 47℃ 52℃