REV: 08/24/12
INTRODUCTION Zonar Systems Virtual Trainer™ Hardware Installation Tips for Professional Installers Zonar Systems’ equipment will provide years of reliable service if properly installed and maintained. Zonar equipment is typically installed in heavy vehicle applications and is often subject to extreme temperatures, dust, dirt, vibration, and shock. Proper installation is the critical first step to equipment longevity and optimal performance.
TABLE OF CONTENTS Virtual Trainer™ Introduction .......................................................................................2 System Overview ...............................................................................4 Equipment .........................................................................................5 System Specifications........................................................................6 General Guidelines...............................................................
SYSTEM OVERVIEW CELL TOWER INTERNET • RFID to log drivers into vehicle • Displays warnings and alerts to improve driver performance • Track driver performance over time 4 ZONAR Secure Servers Encrypted Data Transmissions CUSTOMER On-Site Location
VIRTUAL TRAINER™ EQUIPMENT A. VIRTUAL TRAINER B. VIRTUAL TRAINER Mounting Plate and Mounting Screws (Provided) C.
VIRTUAL TRAINER SPECIFICATIONS/DIMENSIONS System Specifications Important Notice VIRTUAL TRAINER™ It is the Owner's sole responsibility to install and use the Zonar products in a manner that will not cause accidents, personal injury or property damage.
GENERAL GUIDELINES Layout Drill Holes 1) 2) 1) 2) 3) 4) V3 unit must be located a minimum of 8” from any person. V3 has a temperature range of -40˚C (-40˚F) to +85˚C (+185˚F). Do not mount V3 in hot engine compartments or near hot exhaust components. Lay all components out prior to installation to check for proper cable length and interference issues. Avoid mounting Zonar equipment, antennas and wiring near other radio equipment (e.g.
VIRTUAL TRAINER™ INSTALLATION VIRTUAL TRAINER Mounting Plate & Unit 1) Follow General Guideline on page 7. 2) Suggested mounting areas include horizontally atop dashboard. Verify placement acceptability with state DOT/law enforcement prior to installation. See Fig 7-1. 3) Mount onto interior surface large enough to accommodate mounting bracket footprint. 4) Do not install below windows or doors which open to the vehicles exterior to prevent water damage.
VIRTUAL TRAINER™ CHECK LIST Customer: Yard: Date: Installer: Location: GPS ID: Vehicle Odometer Value: Asset #: Vehicle I.D. (e.g.
WARRANTY & NOTICES FCC/IC COMPLIANCE Limited Warranty LIMITED WARRANTY: Zonar warrants that the Hardware provided under this agreement is free from all material defects in workmanship under normal use and service. Zonar’s warranty period for its Hardware is as follows: V3 Product Line - 5 Years EVIRTM - 3 Years All Other Hardware - 1 Year The above warranty periods run from the date of shipment.
NOTES 11
VIRTUAL TRAINER™ USERS MANUAL & INSTALLATION GUIDE © 2012 Zonar Systems • All Rights Reserved.