FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Information to the User This equipment has been tested and found to comply with the limits for a class B digital device pursuant to part 15 of FCC Rules.
Installing your fax/modem it you have never installed an add-in board in your computer before, please follow the instructions in this section carefully. You may also want to refer to the Installation Chapter In your manual. Safety Precautions 1. Turn OFF the computer before you begin, Also, turn OFF any external devices that are connected to your computer, such as printers. 2. Han die the board gently by the edges.
es Inserting the Fax/Modem 1. Tun off the power to the computer. Also, turn off any external devices that are attached, such as a printer and monitor. 2. Take out the mounting screws on the back of you computer. Refer to your computer manual if you cannot locate them. 3. Remove the computer cover. Refer to your computer manual it you cannot determine how to remove the cover. 4. Select an empty PCI slot. You may need to remove the metal slot cover first, using a small screwdriver. 5.
A connect the telephone line to the modem follow these steps: 1. insert ons end of the phone line into the jack on the modem labeled Line, 2. Insert the other end of the phone line into the phone jack, {usually located on your wall). Hf you wish to use a phone set in conjunction with your modem, please folio these steps: 1. Insert the fins from the phone into the jack labeled phone. 2.
S00 — TT Windows 95 Driver Installation 1. Start Windows 95. As soon as Windows 95 starts you will see a screen similar to the diagram {o the right; right, you may have the OSCAR version of Wing or Wings. If so, refer to the instructions following these, 2. Cliche button. This will bring up a screen similar to the diagram to the right: } Note: If you do not see the screen fo the 3.
| bv Windows 95(0SR2) Driver Installation 1. Start Windows 95. As soon as Windows 95 starts you will see a screen similar to the diagram to the right: 2. Click on the 3a. # you did have the driver diskette in the drive and see a screen similar to the diagram to the right, skip to step #6: 3b. if you did not have the driver disk in the drive or you had the Bellatrix COMMUNICATIONS CAROM inserted , you will ses a screen similar to the diagram to the right: 4.
The [oo button will be grayed out until you find a directory that actually contains a modem driver, After Clicking on OK if you do not see a screen similar to the diagram to the right, the location does not contain the correct driver, go back to step #5 to select the correct path: Click on th mutton to complete the modem driver installation.
A Windows 98 Driver Installation 1. Stan Windows 98. As soon as Windows 88 starts you will see a screen similar to the diagram to the right: 2. Clothesline button. You will see a screen similar to the diagram to the right: 4 3. Make sure that the box has a check mark like the diagram to the right and click on the bunion. 4.
5. Clothesline button. If the directory contained the driver you will see a screen similar to the diagram to the right 8, Clothesline button. After the driver files are copied you will see a screen similar to the diagram to the right: 7. Select the Country by clicking on the down arrow to the right of USA to select another Country and then click on the OK button, You will ses a screen similar to the diagram io the right: 8. Click on the button to complete the modem driver installation. 9.
UN-installation of the Windows 95/98 Driver If you ever want to remove the modem or update the modem drivers with newer versions obtained on the web, you must first remove the HSP modem drivers. We provided a utility program that not only removes the modem driver, but completely removes all the modem entries In the Windows registry. Use the following procedure to remove the modem drivers, 1.
I LS are I Common Problems and Their Solutions Problem:Modem answers incoming calls and then returns to ths on-hook condition, disconnecting the caller. This scours most often when connecting to a UNIX system. tn most case, the host does rol prefer to see any result or command echo codes. f this is the case, the codes can be disabled by adding ED Q1 to the modem configuration string.
A —— Feature Notes In addition to high sped fax and data transfer functions, your homemade supports the following additional vols features: Personal Vole Messaging System Automatically detect and route incoming voice, tax and data calls. Crate up to 599 voice mailboxes, each with a personal mailbox greeting message. Listen to voice messages through the telephone handset or speakers. 1 Record your own greeting messages for each mailbox. | Monitor incoming calls and answer the calls at your own convenience.