User Manual

ManualsBrandsZODIAC POOL SYSTEMS ManualsElectronicsZigBee Module

ZODIAC POOL CARE EUROPE

ZA De la Balme

31450 BELBERAUD

Zigbee Module user's manual

ZIG_MOD_100

FCC ID : RIR-24ZTM100

IC: 10837A-24ZTM100

Date : 30/07/2013

Page : 1 / 4

Confidentiel / Confidential

SUMMARY :

1. RESTRICTIONS ....................................... 1

2. AIM ............................................................. 2

3. MODULE INTERFACES ........................ 2

4. IMPACT ON HOST PRODUCT ............. 3

5. WHAT IS PROVIDED ? .......................... 4

ANNEXE :

None

Evolutions du document

Date

Rev

Author

Content

23/07/2013

Thierry Michelon

Initial revision

²²

1. RESTRICTIONS

This module is intended to be used ONLY in Zodiac Pool System Inc (USA/Canada)

and Zodiac Pool Care products (EMEA/APAC)

Module re-use will be done under FCC and IC Limited Modular Approval.

Summary of content (4 pages)

PAGE 1
Zigbee Module user's manual FCC ID : RIR-24ZTM100 IC: 10837A-24ZTM100 ZODIAC POOL CARE EUROPE ZA De la Balme 31450 BELBERAUD SUMMARY : ANNEXE : 1. RESTRICTIONS....................................... 1 None ZIG_MOD_100 Date : 30/07/2013 Page : 1 / 4 2. AIM............................................................. 2 3. MODULE INTERFACES ........................ 2 4. IMPACT ON HOST PRODUCT ............. 3 5. WHAT IS PROVIDED ? ..........................
PAGE 2
Zigbee Module user's manual ZODIAC POOL CARE EUROPE ZA De la Balme 31450 BELBERAUD 2. FCC ID : RIR-24ZTM100 IC: 10837A-24ZTM100 ZIG_MOD_100 Date : 30/07/2013 Page : 2 / 4 AIM This Zigbee module implement 802.15.4 specification is intended for:  Point to point application (ie :remote control)  Star Network topology  Mesh Network topology 3. MODULE INTERFACES Power supply: A +3.3VDC supply must be provided. The RF chip has an internal +2.5 and +1.8V regulation.
PAGE 3
Zigbee Module user's manual ZODIAC POOL CARE EUROPE ZA De la Balme 31450 BELBERAUD 4. FCC ID : RIR-24ZTM100 IC: 10837A-24ZTM100 ZIG_MOD_100 Date : 30/07/2013 Page : 3 / 4 IMPACT ON HOST PRODUCT 4.1. LOCATION The exact Gerber file should be reproduced on the host PCBA. Module should be located in a board corner. 4.2. LABELLING Host product needs to be marked with the following label : Please refer to Drawing: H04218 4.3.
PAGE 4
Zigbee Module user's manual ZODIAC POOL CARE EUROPE ZA De la Balme 31450 BELBERAUD FCC ID : RIR-24ZTM100 IC: 10837A-24ZTM100 ZIG_MOD_100 Date : 30/07/2013 Page : 4 / 4 CAUTION Any changes or modifications not expressly approved by by the part responsible for compliance could void the user's authority to operate the equipment. NOTE: This device complies with FCC and IC RF radiation exposure limits set forth for general population.