User's Manual

60% Mechanical Keyboard User Manual
Specification
Dual mode Wired+ Bluetooth 3.0/5.0
Dimensions: L*W*H: 291.1*101.1*38.72mm
Weight :630g
19 different RGB backlights
ABS seamless double injection keycap
Full key anti-ghosting
Built in Lion-battery ( 2500mAh)
1.6M Type C cable
Hot swappable
Voltage/Current = 5V 150mA
Operation System :WinXP,Win7,Win8,Win10, MAC
Bluetooth Pairing :
1. Set switch on the side of the keyboard to the “ON” position.
2. Press and hold FN+ TAB to enter Bluetooth mode . （When “TAB” key LED is blue ,indicate that the
keyboard is in Bluetooth mode .When “TAB” key LED is red, indicate that the keyboard is in wired
mode.）
3. Press and hold FN+Q/W/E for 3 seconds . The “Q/W/E key LED will begin to flash repeatedly to
indicate that the keyboard is ready to connect to a new device over Bluetooth .
4. On the device you wish to connect to , begin to search for Bluetooth devices and select
“BT3.0 KB /BT5.0 KB “ once it appears on the device .
5. Once the keyboard has connected to the device ,the “Q/W/E” key will stop flashing to
indicate successful Bluetooth paring .
6. The keyboard can support Bluetooth connections for up to 3 devices . Long press FN/Q/W/E
to set up a connection to a new device .Short press to connect to a previously paired device
that is associated with a particular profile .
FN combination keys ：
FN+
[{
]}
:;
‘”
\|
TAB
Ajust
Backlight
speed-
Adjust
Backlight
speed
+
Decrease
backlight
brightness
Increase
backlight
brightness
Switch
RGB
backlight
mode
Toggle between
wired/Bluetooth