User's Manual

757880244 ZM-SHPZ01W 遥控器 快操 REV-A00
尺寸：75*75mm（成品尺寸）
材质:105g双铜+双面印刷4C +折页
Pivot
Quick Start Guide
Method 1: Configure using your smart hub device settings.
Select the “Accessories” option.
Select the “Wireless Device and Smart Kit” connection
method, and choose the “Accessories” option to
connect your motion sensor..
Like us on Facebook.com/Zmodo
Scan the QR-code!
Follow us on Twitter @Zmodo
Scan the QR-code!
正面
背面
Name your sensor and set a password for it. Tap
to proceed.
Note: The password provides an additional layer of security for
your devices. You will not need to use this password when
accessing your devices from the Zmodo app. It is not required,
but it is highly recommended.
√
Make sure that you have a Zmodo smart hub
configured to your account. Select your smart hub
device and access the Device Settings tile.
1
1
Log in and select the Add Device option in the
upper right corner.
+
PIR Motion Sensor
Getting to know your Sensor
1
The Zmodo PIR Motion Sensor is a smart accessory that can be paired
with any Zmodo smart hub device. In order to use this accessory, you will
need to pair it with a Zmodo device with smart hub features. Look for the
This quick start guide will help you configure your PIR Motion Sensor for
initial use. For detailed instructions, please visit:
Before you begin:
Make sure that you have a strong 915MHz connection at the location of your sensor.
Visit for advice on improving your 915MHz signal range.www.zmodo.com/support
You need to have a smart hub device already added to your Zmodo account.
Make sure your smartphone is connected to the 915MHz network that your
Download and install the “Zmodo” app from Google PlayTM or the App
StoreTM. Launch the app and sign in with your Zmodo account information. All
devices will be bound to this account.
Zmodo
We are constantly working to improve our product and app. Please visit www.zmodo.com/support
for updated instructions, manuals, and more.
When the app prompts you to press a button, wave
in front of the motion sensor to pair it with your
Zmodo hub.
When the app prompts you to press a button, wave in
front of the motion sensor to pair it with your Zmodo
hub.
The app will generate a list of Zmodo smart hub
devices on your account. Select the hub that you
would like to pair your motion sensor to, and tap
to proceed.
√
Mobile Setup
2
① Infrared Sensor
2
2
3
4
3
Method 2: Configure using the Add Device menu.
1
1
2
4
1
3
4
5 7 8
If you cannot connect your motion sensor:
Having difficulty?
Try installing your sensor in a location closer to your smart hub device.
Make sure your smart hub devices are updated. Access your Device
Settings, and press the "General" option to check your firmware.
Make sure that your smartphone is connected to the same 915MHz
network that your smart hub device is connected to.
Support
4
For more instructions, troubleshooting, support, and other resources, please
visit:
1
Find a suitable location to install the sensor. Plug the
motion sensor into a power outlet near the area that you
want to monitor. Make sure that the infrared sensor is not
blocked and that there is a clear path between the sensor
and the area that you would like to monitor. Avoid
installing in areas exposed to direct sunlight or near
Name your sensor and set a password for it Tap to
proceed.
Note: The password provides an additional layer of security for your
devices. You will not need to use this password when accessing
your devices from the Zmodo app. It is not required, but it is highly
recommended.
√
1
5
6
Installing your sensor
3
Quick Start Guide
② Plug (Type B)
①
②
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
9