IPCAM User Manual Wireless/Wired Network Camera Night Vision & Remote Operation User Manual 1
IPCAM User Manual Thank you for buying our IP camera. This Series Products are designed and equipped for network video surveillance system, including wired IP bullet camera, wireless IP bullet camera, IP IR dome camera, IP IR waterproof camera etc. We adopt high performance chip to ensure high quality media processor which processes audio and video collection, compression and transmission. Standard MJPEG compression format ensures clear and streaming video performance.
IPCAM User Manual 3.1.1. Configure Network Parameter .....................................................................12 3.2. Logging and Active X Installation...................................................................14 3.3. Main Operation Interface.................................................................................16 3.4. Operator Operation .........................................................................................17 3.4.1. Multi-Device Settings......................
IPCAM User Manual General Introduction IP Camera is a new generation product with the combination of analog camera & IP video technology. Despite all functions which analog cameras have, IP camera can compress and encrypt video and audio signal then send it to remote terminals through internet with its built-in processor and web server.
IPCAM User Manual 1.1.
IPCAM User Manual CPU: Pentium 1.6 GHz Memory: 256MB Audio card: need audio monitor, two way talkback essential Hard Disk : if it need video image,no less favorable than 40G Operation System: 32 bit simple/ English Windows2000、WindowsXP、 Windows2003、Windows Vista & 64 bit simple Chinese/English Windows2003、 Windows XP、Windows Vista etc. Software environment IE 5.0 or above version DirectX8.0 or above version TCP/IP network protocol 2.
IPCAM User Manual 2.1. Interface *Non-extended line IP Camera Tailgate Power Supply Light: constant on after power up Network light: constant sparkle after power up data transmission. Ethernet interface: RJ-45 interface. I/O interface: 1 router alarm input, accept 3, 4 two terminals (input terminal grounding, low level effective trigger); 1 router TTL control input, connect 1,2 two terminals (1,2 terminals short connections).
IPCAM User Manual Power: direct current 12V. GPIO alarm interface: accept external connection linkage alarm equipment (for example: door magnet, infrared) Reset line: two reset line short circuit, equipments restore to ex- factory standards. Ethernet interface: RJ-45 network interface. Backup: follow-up product extend interface.
IPCAM User Manual 2.2.2. PPPoE Installation Under the condition, users need set PPPoE dialing parameter on IP Camera: input the username and password ISP supplier’ offer permit IP Camera dialing connects to Internet. As to set the PPPoE dialing parameter, you can connect device to network through the first way, then write parameter to the device, also through following third way, direct process parameter written to device. The way how to set PPPoE, please refer to 3.4.5.for detailed steps 2.2.3.
IPCAM User Manual modification of IP camera, video could be connected by internet cable to IP camera; under the normal condition, yellow light is on, green light flickers, now physical connection of IP camera finish at this time (in order to connect successfully, we advise to set camera IP as the stable IP at the same net range of PC in LAN , how to set, please refer to 8 frequent questions answer). 3.
IPCAM User Manual Note Note: Before using the product installation, please just use IPCAM standard power adapter. The use of non-certified power adapter may damage the IPCAM. IPCAM should only be installed in the indoor environment After you finished install the IP Finder software, You will finder that icon in your computer program. double click run. icon. The IP Finder is Figure3.
IPCAM User Manual Figure3.3 Note Note: After click search button the software will automatically search for all the devices’ IP address within a local area network.. There are three cases: 1 IP cameras’ IP address not found. After click search button devices’ IP address did not showing in the software’s list: e.g. Figure3.1 2 IP camera’s IP address being found, but the IP Camera’s network segment not as same as the local IP address’.
IPCAM User Manual Figure3.4 NOTE: IP Address Address:: Fill in IP address, ensure that the IP address’ network segment you have filled as same as the PC network segment. Mask Mask:: Use the default subnet mask e.g.: 255.255.255.0 Gateway Gateway:: Ensure that the device’s network gateway as same as your PC’ s. DNS: DNS service provider’s IP address.
IPCAM User Manual 2. Logging and Active X installation 3. 3.2 Before IE monitoring through web, it is necessary to install video plug-in, installation mode as below: Open disk, find that icon. double click the icon. process installation, Click the next step to until finish. There are two way to logging IP camera 1) Double-click the device’ IP address in the list of IP Finder. (Figure 3.2). IE will automatically open and display the device’s login screen.
IPCAM User Manual Figure3.7 enter log in information, click OK to enter, an installation pop-up will appear: e.g. Figure3.7 Figure3.8 Select the needed language, and the way you want to visit. Click Sign in. after installation Active X you can use it. If it is blocked and requires plug-in installation by antivirus software, please remove block.
IPCAM User Manual Note Note: 1. Default device account is admin admin,no password. 3. Main Operation Interface 3. 3.3 Figure3.9 For example: If the is a bright , indicating the device is the first way to monitor the status. When you log on the operator interface, you can perform PTZ and video parameters Direction control: Click the arrows in different directions can be the lens to the appropriate direction of rotation Vertical cruise Level cruise 1. Image mirror indicates a reverse image. 2.
IPCAM User Manual of administrator is the highest, log in different authorities, the operation will be different. Regarding to 3 user authorities, please refer to 3.4.4. Equipment User Administration. If you want to see 4-way,or 9-way, you can click the icon or OSD OSD: In the video display date and time. You can disable the OSD function or choose the color of OSD. Snapshot Photo: Click the icon interception photo. Video: Click icon to enter the recording mode, the icon becomes the end of the recording.
IPCAM User Manual In the multi-device configuration page, you can see all the equipment inside the LAN. The first device is the default device. You can add more devices listed in the list of equipment. Embedded applications, up to 4 devices at the same time-line. Click the “second road equipment” and double-click “Current list of devices in the LAN” in the device entry name, host address, Http port will automatically be filled, require the user to fill in the correct account name and password, click “Add.
IPCAM User Manual Figure3.11 3.4.2 Basic Network Settings Figure3.
IPCAM User Manual 3.4.3 Wireless Setting First make sure that your wireless router is working well. Then click the button. After you click twice. The camera will find out the Wireless LAN automatically. Then select the Wireless LAN you wanted. Then the Wireless LAN’s information will showing. Finally input the Wireless password and submit. Figure3.13 3.5.
IPCAM User Manual Dynamic DNS Setting(DDNS) Figure3.15 All the above information is set up when the device is ready to deliver; users generally do not need to change. In case of any accidental loss, user needs to re-obtain the domain name, and fill it himself, juts do as the above, the user’s name is just the first four characters, and this is for remote access. For example, http://abcd.88safe.com the user’s name is abcd. The password is DDNS.
IPCAM User Manual The above setting is a preparation for the alarm function, the sender should be entered the sender’s email address,recipient 1、2、3、4 is filled with recipient E-mail address;SMTP server should be filled with the sender email SMTP server,e.g. the sender email address is abc@163.com,and enter mail.163.com.
IPCAM User Manual keeps consiste nt with the mentioned upload pictures interval of Ftp service settings. The schedule refers to arming time,as the selected time interval: 0:00 minute per week to 0:45 minutes and Monday 1:00 hour and 2:00 hour Figure3.18 Reset/Firm Ware Upgrade This sector is for camera firmware upgrade, it includes device system firmware and device application firmware Be cautious to apply for it! Figure3.
IPCAM User Manual Reboot Equipment Click restart, it appears the above picture, click ok, wait for 1 minute and you can use it normally 4. Others 4.1 Port Forwarding Settings in router When a remote access via internet visit, port forwarding in router is a must, different brands routes have different name, but the operation is the same. Take the TP-LINK TD-8840 router port mapping setting as example. To set up IP Camera as an example: router inner web IP is 192.168.1.
IPCAM User Manual address is 192.168.1.50, and port is 80. 1. First log in router web administration interface. 2. Click in front of left side “Advanced Setup 3. Click “virtual server” in the unfolded menu. 4. fill “80” under the right port start or port end end, Server IP address fill "192.168.1.50", protocol select "TCP/UDP"OR”“TCP”, finally don’t forget click under “"save/apply” 1. DLINK ex-factory definition router address is 192.168.0.1 2. Linksys ex-factory definition router address is 192.168.1.
IPCAM User Manual warranty period will be free maintenance. Warranty Terms as following: a) Charge-free maintenance of the product is one year. We can repair it for free during the guarantee period (Damages not caused by misuse or vandalism). Repair over guarantee period, we will charge maintenance fee. b) During guarantee period, breakdown caused by misuse or other reasons out of range of warranty. You could ask repair depend on the card.