.Log in and press + in the upper right corner. Select "Add Device".
.Tap √ to proceed (If you’re setting up multiple cameras at once, tap + to add additional units).
.Follow the on-screen instructions and select “Tap here to begin setup” to go to the WiFi settings page on your smartphone. Note: If you are using an iOS device, you will need to manually go to the WiFi settings page on your smartphone.
.Select the network named “HUB_SAP” and connect to it. Note: If you see a "No Internet Connection" error message, please ignore it and connect anyway.
.Return to the HUB app page and select or enter the SSID and password of the WiFi network that you want your camera to connect to. Note: The WiFi name and password are case sensitive. Tap √√ to proceed.
. If you see this screen, the app will connect your camera to your WiFi network. This may take a few minutes. Note: If you are connecting multiple devices, you will need to wait for the app to find and connect all devices.
.Name your camera and set a password for it. Tap √√ to proceed. Note: The password provides an additional layer of security for your devices. You will not need to use this password when accessing your devices from the HUB app. It is not required, but it is highly recommended.
.云存储相关内容。可以引导客户体验和开通。
. Your camera has been successfully configured! You can now share or view your camera.
FCC STATEMENT This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
