D ropins Installation Guide and Users Manual
REGISTERING YOUR PRODUCT ZLINE Kitchen and Bath provides Attainable Luxury, where the kitchen and bath of your Please register your ZLINE appliance. Begin the simple registration process by dreams is never out of reach. Through our unique designs and unparalleled quality, we’re scanning the QR code. dedicated to providing you an elevated experience in the heart of your home. With an endless selection of features and finishes, our inspiration is your reality.
WARRANTY WARRANTY COVERAGE WHAT IS NOT COVERED ZLINE Kitchen and Bath range products will be warrantied for one year from the 1. original purchase date for the original purchaser of the product. This warranty covers all parts and labor for necessary repairs if any part of the product proves to be Installation or start-up, damages or problems caused by improper installation or use. 2. defective in materials or workmanship.
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS 1 WARNING WARRANTY AND SERVICE 3 PRODUCT DIMENSIONS 3 • The manufacturer will not be responsible for any damage to property or to persons caused by incorrect installation, improper use of the appliance, or failure to heed the warnings listed.
IMPORTANT SAFETY INSTRUCTIONS WARRANTY AND SERVICE • Installation of any gas-fired equipment should be made by a licensed plumber. A manual gas shut-off valve must be installed in the gas supply line ahead of the oven in the gas flow for safety and ease of service. Please keep this manual for future use. The rating tag shows the model and serial number of your range. The tag is located on the underside of the product. Do not remove permanently affixed labels, warnings, or plates from the product.
BEFORE INSTALLATION BEFORE INSTALLATION • This appliance shall only be installed by an authorized professional. ROOM VENTILATION • The appliance shall be installed in accordance with the standards of the country An exhaust fan may be used with the appliance; in each case it shall be installed where it will be installed. The installation of this appliance must conform to local in conformity with the appropriate national and local standards. Exhaust hood codes and ordinances.
INSTALLATION INSTALLATION INSTALLATION ADJACENT TO KITCHEN CABINETS ATTACHING THE DROPIN For the best look, the worktop should be level with the cabinet countertop. To prevent liquids from accidentally leaking into the underlying storage space, the appliance is equipped with a special gasket. To apply this gasket, carefully follow the instructions in Fig. 1. 1. Lay out the protective sealing strips along the edges of the opening in the bench top and carefully overlap the strip end. (See Fig. 1). 2.
INSTALLATION INSTALLATION The appliance shall be connected to a single phase electric line rated at 110-120Vac GAS CONNECTION and 60Hz frequency. The true voltage in most homes is usually between these values. • All gas connections must comply with national and local codes. The gas supply line (service) must be the same size or greater than the inlet line of the appliance. ELECTRIC POWER RATING This range uses a ½˝ NPT inlet.
INSTALLATION INSTALLATION MANUAL SHUT-OFF VALVE PRESSURE REGULATOR • This valve is not shipped with the appliance and must be provided by the installer. • The manual shut-off valve must be installed in the gas service line between the gas hook-up on the wall and the appliance inlet, in position where it can be reached quickly in the event of an emergency. • In Massachusetts: A T handle type manual gas shut-off valve must be installed in the gas supply line to this appliance.
INSTALLATION INSTALLATION GAS CONVERSION PROCEDURE STEP 1: PRESSURE REGULATOR The gas conversion procedure for this range includes: The pressure regulator supplied with the appliance is a convertible type pressure 1. Pressure Regulator regulator for use with Natural Gas at a nominal outlet pressure of 4˝ w.c. or LP gas 2. Surface Burners at a nominal outlet pressure of 11” w.c. and it is pre-assembled from the factory 3.
INSTALLATION INSTALLATION STEP 2: SURFACE BURNERS STEP 3: FLAME ADJUSTMENT 1. 1. Light one burner at a time and set it to the MINIMUM position (small flame). 2. Remove the knob. 3. The range is equipped with a safety valve. Using a small-size flathead To replace the nozzles of the surface burners, lift up the burners and unscrew the nozzles shipped with the range using a 7 mm (socket wrench). 2. Replace nozzles using the conversion set supplied with the range.
INSTALLATION INSTALLATION INSTALLATION CHECKLIST ROOM VENTILATION 1. Is the range mounted on its legs? The use of a gas cooking appliance generates heat and humidity in the room where 2. Is the back guard securely connected? it is installed. Proper ventilation in the room is needed. Make sure the kitchen is 3. Have the chains been properly installed? equipped with a range hood of appropriate power (400 CFM minimum). Activate 4.
OPERATION OPERATION SURFACE BURNER OPERATION - ELECTRIC IGNITION Be sure to set all worktop/oven/broiler burner controls to the OFF position after each use of the appliance. To activate the electric ignition, simply turn the control knob counter-clockwise to maximum power, then press the knob in to start the flow of gas and the ignition spark. The spark will be released at the metal tip of the white ceramic pin located on the side of the burner. Once the flame is on, release the control knob gently.
MAINTENANCE AND CLEANING CLEANING YOUR RANGE During cleaning operation, never move the appliance from its original WARNING TROUBLESHOOTING RANGE PROBLEM POSSIBLE CAUSE AND/OR REMEDY Igniters are not sparking Rangetop is not connected to electrical power. installation position. Never use abrasive cleaners! Scratches on the stainless Check power circuit breaker, wiring, and fuses. If steel surfaces are permanent.
Installation Guide and User Manual 2.0.0 1-614-777-5004 contact@zlinekitchen.com www.zlinekitchen.