Product Name and Model Number User Manual -W Thank you for choosing our product. Please read the instructions carefully before operation. Follow these instructions to ensure that the product is functioning properly. The images shown in this manual are for illustrative purposes only. For further details, please visit our Company’s website www.zkteco.com. P a g e |1 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
User Manual relating to the use of the information contained in or referenced by this manual, even if ZKTeco has been advised of the possibility of such damages. This manual and the information contained therein may include technical, other inaccuracies or typographical errors. ZKTeco periodically changes the information herein which will be incorporated into new additions/amendments to the manual.
User Manual About the Company ZKTeco is one of the world’s largest manufacturer of RFID and Biometric (Fingerprint, Facial, Finger-vein) readers. Product offerings include Access Control readers and panels, Near & Far-range Facial Recognition Cameras, Elevator/floor access controllers, Turnstiles, License Plate Recognition (LPR) gate controllers and Consumer products including battery-operated fingerprint and face-reader Door Locks.
User Manual Document Conventions Conventions used in this manual are listed below: GUI Conventions For Software Convention Bold font > Description Used to identify software interface names e.g., OK, Confirm, Cancel. Multi-level menus are separated by these brackets. For example, File > Create > Folder. For Device Convention Description <> Button or key names for devices. For example, press . [] Window names, menu items, data table, and field names are inside square brackets.
User Manual Table of Contents 1 APPEARANCE ..............................................................................................................................................7 2 INSTALLATION SET-UP .............................................................................................................................. 8 2.1 INSTALLATION ENVIRONMENT ................................................................................................................................................
User Manual 9.3.3 LOCAL SETTING .................................................................................................................................................................................................................29 9.3.4 TIME SETTING .....................................................................................................................................................................................................................30 9.3.5 STORAGE MANAGE ...........
User Manual 1 Appearance P a g e |7 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
User Manual 2 Installation Set-up 2.1 Installation Environment 2.2 Installation Steps Make sure that the device is installed as per the installation instructions. Otherwise, you will bear any consequence resulting from your actions. The device supports two installation methods: wall-mounted installation and desktop installation. Users can choose according to actual needs. Mode 1: Wall-mounted Installation Step1: Find a suitable indoor installation location, the recommended installation height is 59.
User Manual Mode 2: Desktop Installation Step1: Take out the device and the bracket from the box. Step2: Put the white bracket rubber sleeve on the bottom of the bracket. Step3: Finally, insert the bracket into the mounting slot behind the device. P a g e |9 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
User Manual 3 Connection Diagram -W Notes: 1. VT07-B01-W , Video intercom device and camera are connected through out the network cable. 2. In LAN, the IP addresses of all devices must be in the same network segment. See figure above for an example. P a g e | 10 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
User Manual 4 Main Menu After powering on the device, it enters the main interface as shown below. When you tap the icon to turn on the Do Not Disturb mode, the screen is shown below. A red bar will appear at the bottom of the screen. Prompts you that the Do Not Disturb feature is turned on. P a g e | 11 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
User Manual Function Description Menu Descriptions Do Not Disturb mode function button. Once turned on, when the outdoor station calls, the indoor station has no response and no record, and the priority is higher than the "Do Not Disturb Plan" in the setting interface. Applies to this device only. Live Video To view the real-time video of the outdoor station and the real-time video of the IPC bound to it, and the real-time video of other IPC. Call Log To view the answered and missed call logs.
User Manual 5 Live Video Setting 5.1 Outdoor Station Monitor Tap Live Video on the main menu to enter the Outdoor Station Monitor interface. The added Outdoor Station will be displayed on the interface. Note: The user can customize the position name through the path Setting > Advanced Setting > Device Manage > +Add > Position. 5.2 IPC Monitor Tap Live Video on the main menu. Then tap icon on the Outdoor Station Monitor interface. The added IPC will be displayed on the interface.
User Manual 5.3 Live Video 5.3.1 Real-time Video of Outdoor Station Select an outdoor station on the Outdoor Station Monitor interface to enter the screen. The screen is shown below. Function Description Function Descriptions When the monitoring countdown ends, exit the current interface. Clicking the "Monitor Countdown" icon before the countdown ends will reset the countdown. Can be modified via Setting > Advanced Setting > Local Setting > Call Countdown path.
User Manual Used for manual recording. Click the icon to start audio/video recording, and stop recording until the countdown ends. Or click the countdown icon during the countdown time to continue recording until the time ends.
User Manual 6 Call Log 6.1 All call logs Tap Call Log on the Main Menu to enter the All Call list screen. As shown below. Select a call log in the list to enter the call playback screen. As shown below. Function Descriptions Return to the previous menu. Delete the current call log. Turns on/off the sound of the current call log. Play/pause the current call log. Play the last call log. Play the next call log. P a g e | 16 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
User Manual 6.2 Missed call logs Tap Call Log > icon to enter the missed call list screen. As shown below. Select a missed call log in the list to enter the call playback screen. The interface is the same as that of the call log, and will not be repeated here. P a g e | 17 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
User Manual 7 News Settings Here users can view some video information such as call logs, manual logs and snapshots. Tap News on the Main Menu interface. Tap icon to enter the video information interface. As shown below. Function Description Menu Descriptions Call Record Displays all received and missed call recordings as the same recording as the call log recording. Manual Record Manually recorded footage during real-time video surveillance. Snap Live video interface manually captures images.
User Manual 8 Network Settings When the indoor station needs to communicate with the outdoor station or IPC through Ethernet, you need to configure the network settings and ensure that all the devices are connected to the same network segment. Tap Network on the Main Menu to enter the network setting screen. 8.1 Wired Network icon on the Network Setting screen to enter the wired network setting screen. As shown below.
User Manual Remark: A direct connection to the local area network can be used. Connect the indoor station and the outdoor station directly through the network cable, and the outdoor station can preview, record, and talk normally in the indoor station. 8.2 Wireless Network Tap icon on the Network Setting screen. Settings interface to configure the Wi-Fi settings. Wi-Fi is enabled in the device by default. Toggle the button to enable or disable Wi-Fi.
User Manual You can click on the connected Wi-Fi to view more information. P a g e | 21 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
User Manual 9 System Settings It helps to set related system parameters to optimize the accessibility of the device. Tap Setting on the Main Menu interface to get into its menu options. 9.1 Sound Settings Mainly used to set ringtones and call volume settings. Tap icon on the Setting screen to configure the sound settings. As shown below. Function Description Function Descriptions Incoming Ring Built-in function for changing the ringtone of incoming calls in different styles.
User Manual Microphone Volume Adjust the volume of the indoor station input sound, i.e. the volume that can be heard at the outdoor station, valid value: 0-100. Speaker Volume Adjust the volume of the indoor station output sound, i.e. the volume that the indoor station can hear, valid value: 0-100. 9.1.1 Do Not Disturb Plan icon to enable the Do Not Disturb Plan on the Sound Setting screen. As shown below.
User Manual 9.2 Display Settings Tap icon on the Setting screen to get into its menu options. As shown below. Function Description Function Descriptions Screen Brightness Adjust the brightness of the indoor station screen, the range is 0-100. Standby Time When the indoor station does not operate within the set time, the screen will be automatically changes to a rest screen or clock screensaver. Time options include: 30s, 60s, 90s and 120s.
User Manual 9.3 Advanced Settings When entering any interface of advanced settings, you need to enter a password. After entering the interface with the correct password, you do not need to enter the password again to enter other interfaces of advanced settings. However, if you exit the Advanced Settings screen and enter it again, you need to enter the password again. Tap icon on the Setting screen to get into its menu options. As shown below.
User Manual 9.3.1 Modify Password It is used to set the password for entering the advanced setting interface. Tap Modify Password on the Advanced Setting interface. Enter the new password twice, then click Sure to confirm and exit to the previous menu. Note: The password can be set up to 31 characters, and the character types include: letters, numbers, and symbols. 9.3.2 Device Management Tap Device Manage on the Advanced Setting interface. P a g e | 26 Copyright©2022 ZKTECO CO., LTD.
User Manual 9.3.2.1 Search Device Tap icon on the Device Manage interface to search the device. The device will search for all online outdoor stations and IPCs in the LAN. 9.3.2.2 Add Device Tap P a g e | 27 icon on the Device Manage interface to add the device. Copyright©2022 ZKTECO CO., LTD. All rights reserved.
User Manual Function Description Function Descriptions Device Type Used to set the type of device, including the Outdoor Station and IPC. Position Customize the device location. BindIPC1/2/3 When the device type is set to outdoor station, the added IPC can be selected for binding. By default, the outdoor station and the bound IPC1 are authorized to record and capture images. Device IP Customize the IP address of the device. User Name Enter the login user name of the camera.
User Manual 9.3.3 Local Setting Tap Local Setting on the Advanced Setting interface. As shown below. Function Description Function Descriptions Indoor Station Number Customize the indoor station number. Indoor Station Position Customize the indoor station location. Monitor Time After the monitoring reaches the set time, exit the monitoring interface. When set to unlimited, the native device continues to monitor until manually exited. Includes: 10s, 20s, 30s, 40s, 50s, 60s and Unlimited.
User Manual 9.3.4 Time Setting Tap Time Setting on the Advanced Setting interface. As shown below. Function Description Function Descriptions Time Modify the device time manually. Date Modify the device date manually. Time Zone To select a time zone. NTP Configuration Whether to enable NTP configuration. Server Address Turn on the switch to display the server address asia.pool.ntp.org (default). Adjust Time Interval(h) The adjustment time interval is customized, the range is 1-72 hours.
User Manual 9.3.5 Storage Manage Tap Storage Manage on the Advanced Setting interface. As shown below. Function Description Function TF Status Format TF Descriptions When the TF card connected to the device is normal, the device can record and capture pictures normally. Not inserted card or connection abnormal, the device can not record and capture pictures. Format the memory card.
User Manual 9.3.6 Network Manage Tap Network Manage on the Advanced Setting interface. As shown below. Function Description Function Descriptions IP Type Select the way to enter the IP address, there are Static and DHCP options. If Static is enabled, the IP address can be set manually. Dynamic Host Configuration Protocol, which is to dynamically allocate the IP addresses for clients via server. IP Address The default IP address is 192.168.1.201.
User Manual 9.4 System Information Tap icon on the Setting interface. View the device's name, model, firmware version, serial number, UID and version date. 9.5 Reset Settings Tap icon on the Setting interface to get into its menu options. As shown below. P a g e | 33 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
User Manual Function Description Function Descriptions Reboot Click Reboot, click Sure in the confirmation box that pops up, and the device reboots. Restore Default Parameters Click Restore Default Parameters, click Sure in the confirmation box that pops up, and the device reboots. All settings are restored to default except network parameters and access connection device information are not reset.
User Manual 10 Make a Call 10.1 Set the Communication Address In the LAN, set the IP addresses of the indoor station and the outdoor station in the same network segment. Indoor station side On the Main Menu, tap Network to set IP address and Gateway address of the indoor station. Examples are as follows. Outdoor station side On the Main Menu, tap COMM. > Ethernet to set IP address and Gateway address of the outdoor station. P a g e | 35 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
User Manual 10.2 Adding outdoor station Indoor station side Tap Setting > Advanced Setting > Device Manage > +Add to add the outdoor station on the indoor station. Device Type: Set the device type to outdoor station. Device IP: Enter the IP address of the outdoor station. After the setting is complete, click Save to save and exit. 10.
User Manual When the indoor station receives an incoming call alert, the interface displays as shown below. P a g e | 37 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
User Manual Click the icon and both parties can talk normally. The interface is shown below. Function Descriptions Used to set the indoor unit to mute. After the indoor station answers, click the mute icon to block the sound of the indoor station. The indoor station can hear the sound of the outdoor station, but the outdoor station cannot hear the sound of the indoor station. Click again to cancel the mute. Click to hang up the current video call.
User Manual Appendix FCC Warning Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
User Manual Eco-friendly Operation The product's "eco-friendly operational period" refers to the time during which this product will not discharge any toxic or hazardous substances when used in accordance with the prerequisites in this manual. The eco-friendly operational period specified for this product does not include batteries or other components that are easily worn down and must be periodically replaced. The battery's eco-friendly operational period is 5 years.
ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan, China. Phone : +86 769 - 82109991 Fax : +86 755 - 89602394 www.zkteco.com Copyright © 2022 ZKTECO CO., LTD. All Rights Reserved. P a g e |1 Copyright©2022 ZKTECO CO., LTD. All rights reserved.