Product Name and Model Number User Manual User Manual ProFace X (DS) Date: March 2022 Doc Version: 1.0 English Thank you for choosing our product. Please read the instructions carefully before operation. Follow these instructions to ensure that the product is functioning properly. The images shown in this manual are for illustrative purposes only. For further details, please visit our Company’s website www.zkteco.com. P a g e |1 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
ProFace X (DS) User Manual Copyright © 2022 ZKTECO CO., LTD. All rights reserved. Without the prior written consent of ZKTeco, no portion of this manual can be copied or forwarded in any way or form. All parts of this manual belong to ZKTeco and its subsidiaries (hereinafter the "Company" or "ZKTeco"). Trademark is a registered trademark of ZKTeco. Other trademarks involved in this manual are owned by their respective owners.
ProFace X (DS) User Manual relating to the use of the information contained in or referenced by this manual, even if ZKTeco has been advised of the possibility of such damages. This manual and the information contained therein may include technical, other inaccuracies or typographical errors. ZKTeco periodically changes the information herein which will be incorporated into new additions/amendments to the manual.
ProFace X (DS) User Manual About the Company ZKTeco is one of the world’s largest manufacturer of RFID and Biometric (Fingerprint, Facial, Finger-vein) readers. Product offerings include Access Control readers and panels, Near & Far-range Facial Recognition Cameras, Elevator/floor access controllers, Turnstiles, License Plate Recognition (LPR) gate controllers and Consumer products including battery-operated fingerprint and face-reader Door Locks.
ProFace X (DS) User Manual Document Conventions Conventions used in this manual are listed below: GUI Conventions For Software Convention Bold font > Description Used to identify software interface names e.g., OK, Confirm, Cancel. Multi-level menus are separated by these brackets. For example, File > Create > Folder. For Device Convention Description <> Button or key names for devices. For example, press . [] Window names, menu items, data table, and field names are inside square brackets.
ProFace X (DS) User Manual Table of Contents 1 2 3 SAFETY MEASURES ......................................................................................................................... 7 OVERVIEW...................................................................................................................................... 10 INSTRUCTION FOR USE ................................................................................................................. 12 3.1 HOW TO SCAN THE QR CODE? ......
ProFace X (DS) User Manual 8.2 ACCESS LOGS SETTING ........................................................................................................................................................................52 8.3 FACE PARAMETERS ...............................................................................................................................................................................54 8.4 VIDEO INTERCOM PARAMETERS ............................................................
ProFace X (DS) 1 User Manual Safety Measures The below instructions intend to ensure that the user can use the product correctly to avoid danger or property loss. The following precautions are to keep users safe and prevent any damage. Please read carefully before installation. Noncompliance with instructions could lead to product damage or physical injury (may even cause death). 1.
ProFace X (DS) User Manual 10. Lightning - Can install external lightning conductors to protect against electrical storms. It stops power-ups from destroying the system. Recommended installing the devices in areas with limited access. Electrical Safety Before connecting an external cable to the device, complete grounding properly, and set up surge protection; otherwise, static electricity will damage the mainboard.
ProFace X (DS) User Manual Note: Make sure whether the positive polarity and negative polarity of the DC 12V AC adapter is connected correctly. A reverse connection may damage the device. It is not advisable to connect the AC 24V AC adapter to the DC 12V input port. Make sure to connect the wires following the positive polarity and negative polarity shown on the device's nameplate.
ProFace X (DS) 2 User Manual Overview ProFace X(DS) is a newly designed version of the ProFace product line, which is designed to handle a wide range of scenarios. Darklight, extremely strong light (100,000 lux), and Dual Spectrum Facial Recognition technologies enable the terminal to recognize faces in extremely strong light and darklight settings without the use of an LED flash, vastly improving the face recognition experience and accuracy.
ProFace X (DS) User Manual Specifications 30,000 (1: N) Faces 50,000 (Optional) Users/Cards Capacity 50,000 1,000,000 Transactions 2,000,000 (Optional) User Photos 10,000 Event Photos 7,500 Security Relay Box Wiegand/RS485 Slave Reader with Compatibility FP/RFID RS232 External Printer ZKBioSecurity Software Standard Functions Access Levels, Groups, Holidays, DST, Duress Mode (Password), AntiPassback, Record Query, Custom Wallpaper, Screen Saver, & Tamper Switch Alarm Quad-core ARM Cortex-A7@
ProFace X (DS) User Manual TCP/IP Communication Wiegand Input / Output Wi-Fi (Optional) RS485/RS232 Face Algorithm: ZKLiveFace5.
ProFace X (DS) User Manual 3.2 Standing Position, Posture and Facial Expression The recommended distance The distance between the device and a user whose height is in a range of 1.55m to 1.85m is recommended to be 0.3 to 2.5m. Users may slightly move forward or backward to improve the quality of facial images captured.
ProFace X (DS) User Manual Correct face registration and authentication method Recommendation for registering a face Maintain a gap of 40cm to 80cm between the device and the face while registering it. Be careful not to change your facial expression. (Smiling face, drawn face, wink, etc.) If you do not follow the instructions on the screen, the face registration may take longer or may fail. Be careful not to cover the eyes or eyebrows.
ProFace X (DS) User Manual 3.4 Standby Interface After connecting the AC adapter, the following standby interface is displayed: Click to enter the User ID input interface. When there is no Super Administrator set in the device, tap Visitors tap After installing the Super Administrator on the device, it must be verified by the Super to go to the menu. to make a call and the phone will ring. Administrator before using the menu functions.
ProFace X (DS) User Manual Press the corresponding punch state key to select your current punch state, which is displayed in green. Note: 1) For the security of the device, it is recommended to register a super administrator, the first time you use the device. 2) The punch state choices are turned off by default and must be set to another option in the "9.4 Punch States Options" to have them on the standby screen P a g e | 16 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
ProFace X (DS) User Manual 3.5 Virtual Keyboard Note: The device supports the input in the Chinese language, English language, numbers, and symbols. 1) Tap [En] to switch to the English keyboard. 2) Press [123] to switch to the numeric and symbolic keyboard. 3) Tap [ABC] to return to the alphabetic keyboard. 4) Tap the input box, and a virtual keyboard will appear. 5) Tap [ESC] to exit the virtual keyboard. P a g e | 17 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
ProFace X (DS) User Manual 3.6 Verification Mode 3.6.1 QR Code Verification In this verification mode, the device compares the QR code image collected by the QR code collector to all of the QR code data on the device. On the ZKBioSecurity App, tap [Mobile Credential], and a QR code with employee ID and card number (static QR code only includes card number) details will appear. To achieve contactless authentication, a QR code can be used to replace a physical card on a specific device. 3.6.
ProFace X (DS) User Manual 2. Enable Mask Detection When the user enables the Enable Mask Detection function, the device identifies whether the user is wearing a mask while verification or not. The comparison result prompt interface's pop-ups are listed below. P a g e | 19 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
ProFace X (DS) User Manual 1:1 Facial Verification In this verification mode, the device compares the face captured by the camera to the facial template associated with the entered user ID. Tap [OK] on the main interface after entering 1:1 facial verification mode and entering the user ID. If the user has registered a card and password in addition to their face, and the verification method is set for Card/ Password/ Face verification, the following screen will appear.
ProFace X (DS) User Manual If the verification fails, it prompts "Please adjust your position! ". 3.6.3 Multi-face Verification 1: N Multi-face Verification 1. conventional verification In this verification mode, the device compares the obtained multi-person facial images with all the face data stored in it. At the same time, the device can verify up to four people. The number of verification results displayed on the right side, can be customized.
ProFace X (DS) User Manual 2. Enable Mask Detection When the user enables the Enable Mask Detection function, the device identifies whether the user is wearing a mask while verification or not. The following are the pop-ups of the comparison result prompt interface. Note: Not wearing a mask is displayed as P a g e | 22 icon. Copyright©2022 ZKTECO CO., LTD. All rights reserved.
ProFace X (DS) User Manual 1:1 Multi-face Verification In this verification mode, the device compares the face captured by the camera with the facial template associated to the entered user ID. Press on the main interface and select the 1:1 facial verification mode and enter the user ID and tap [OK]. If the user has registered card and password in addition to the face, and the verification method is set to Card/ Password/ Face verification, the following screen will appear.
ProFace X (DS) User Manual After the verification is successful, the prompt box will display the verification result, as shown in the figure below: 3.6.4 Card Verification 1: N Card Verification mode The 1: N Card Verification mode compares the card number in the card induction area with all the card number data registered in the device; The following is the card verification screen. P a g e | 24 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
ProFace X (DS) User Manual 1:1 Card Verification The 1:1 Card Verification mode compares the card number in the card induction area with the number associated with the employee's User ID registered in the device. Press on the main interface to open the 1:1 card verification mode. Enter the user ID and click [OK]. If the user has registered with face and password in addition to his/her card, and the verification method is set to Card/ Password/ Face verification, the following screen will appear.
ProFace X (DS) User Manual 3.6.5 Password Verification The device compares the entered password with the registered password of the given User ID. Tap the button on the main screen to enter the 1:1 password verification mode. Then, input the user ID and press [OK]. If the user has registered face and card in addition to a password, and the verification method is set to Card/ Password/ Face verification, the following screen will appear. Select the icon to enter password verification mode.
ProFace X (DS) User Manual Input the password and press [OK]. Below are the display screens after entering a correct password and a wrong password, respectively. Verification is successful P a g e | 27 Verification is failed Copyright©2022 ZKTECO CO., LTD. All rights reserved.
ProFace X (DS) User Manual 3.6.6 Combined Verification This device allows you to use a variety of verification methods to increase security. There are a total of 9 distinct verification combinations that can be implemented, as listed below: Combined Verification Symbol Definition Symbol Definition Explanation / or This method compares the entered verification of a person with the related verification template previously stored to that Personnel ID in the Device.
ProFace X (DS) 4 User Manual Main Menu on the Standby interface to enter the Main Menu, and the following screen will be displayed: Press Function Description Menu Descriptions User Mgt. To Add, Edit, View, and Delete information of a User. User Role To set the permission scope of the custom role and enroller for the users, that is, the rights to operate the system. COMM. To set the relevant parameters of Network, Serial Comm.
ProFace X (DS) 5 User Manual User Management 5.1 User Registration Tap User Mgt. on the main menu. 5.1.1 User ID and Name Tap New User and enter the User ID and Name. Note: 1) A name can take up to 34 characters. 2) The user ID may contain 1-14 digits by default, support number and alphabetic. 3) During the initial registration, you can modify your ID but not after the registration.
ProFace X (DS) User Manual 5.1.2 User Role On the New User interface, tap on User Role to set the user’s duty as either Normal User or Super Admin. Super Admin: The Super Administrator owns all management privileges in the Device. Normal User: If the Super Admin is registered already in the device, then the Normal Users will not have the privilege to manage the system and can only access authentic verifications.
ProFace X (DS) User Manual 5.1.4 Card Enroll Card Tap Card in the New User interface to enter the card registration page. Swipe the card underneath the card reading area on the Card interface. The registration of the card will be successful. If the card has already been registered, the message "Error! Card already enrolled" appears. The registration interface looks like this: P a g e | 32 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
ProFace X (DS) User Manual Enroll Card QR Code Tap Card in the New User interface to enter the card registration page. On the Card interface, show the QR code in front of the camera. The QR code registration will be successful. If the QR code is registered already then the “Error! Card already enrolled.” message shows up. The registration interface is as follows: 5.1.5 Password Tap Password in the New User interface to enter the password registration page.
ProFace X (DS) User Manual Note: The password may contain 1 to 8 digits by default. 5.1.6 Profile Photo Tap on Profile Photo in the New User interface to go to the Profile Photo registration page. When a user registered with a photo authenticates successfully, the user's registered photo is displayed. P a g e | 34 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
ProFace X (DS) User Manual To take a photo, tap Profile Photo to open the device's camera, then tap the camera icon. The captured photo is displayed on the top left corner of the screen and then the camera opens up again to take another photo, after taking the initial photo. Note: While registering a face, the system automatically captures a picture as a profile photo.
ProFace X (DS) User Manual 5.3 Edit User On the All-Users interface, tap on the required user from the list and tap Edit to edit the user information. Note: The process of editing the user information is the same as adding a new user, except that the User ID cannot be modified while editing a user. The process in detail refers to "5.1 User Registration". P a g e | 36 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
ProFace X (DS) User Manual 5.4 Delete User On the All-Users interface, tap on the required user from the list and tap Delete to delete the user or specific user information from the device. On the Delete interface, tap on the required operation, and then tap OK to confirm the deletion. Delete Operations Delete User: Deletes all the user information (deletes the selected User as a whole) from the Device. Delete Face Only: Deletes the Face information of the selected user.
ProFace X (DS) User Manual All the Display Styles are shown as below: Multiple Line P a g e | 38 Mixed Line Copyright©2022 ZKTECO CO., LTD. All rights reserved.
ProFace X (DS) 6 User Manual User Role User Role facilitates to assign some specific permissions to certain users, based on the requirement. On the Main menu, tap User Role, and then tap on the User Defined Role to set the user defined permissions. The permission scope of the custom role can be set up into 3 roles, that is, the custom operating scope of the menu functions of the user. On the User Defined Role interface, toggle Enable Defined Role to enable or disable the user defined role.
ProFace X (DS) User Manual First tap on the required Main Menu function name, and then select its required sub-menus from the list. Note: If the User Role is enabled for the Device, tap on User Mgt. > New User > User Role to assign the created roles to the required users. But if there is no super administrator registered in the Device, then the device will prompt "Please enroll super admin first!" when enabling the User Role function. P a g e | 40 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
ProFace X (DS) 7 User Manual Communication Settings Communication Settings are used to set the parameters of the Network, Serial Comm, PC Connection, Wireless Network, Cloud Server, Wiegand, and Network Diagnosis. Tap COMM. on the main menu. 7.1 Network Settings When the device needs to communicate with a PC over the Ethernet, you need to configure network settings and ensure that the device and the PC connect to the same network segment. Tap Ethernet on the Comm.
ProFace X (DS) User Manual Function Description Function Name Descriptions IP Address The default IP address is 192.168.1.201. It can be modified according to the network availability. Subnet Mask The default Subnet Mask is 255.255.255.0. It can be modified according to the network availability. Gateway The Default Gateway address is 0.0.0.0. It can be modified according to the network availability. DNS The default DNS address is 0.0.0.0. It can be modified according to the network availability.
ProFace X (DS) User Manual connected to a card reader. There are 4 baud rate options at which the data communicates with PC. They are: 115200 (default), 57600, 38400, and 19200. Baud Rate The higher the baud rate, the faster is the communication speed, but also less reliable. Hence, a higher baud rate can be used when the communication distance is short; when the communication distance is long, choosing a lower baud rate is more reliable. 7.
ProFace X (DS) User Manual Searching the Wi-Fi Network WIFI is enabled in the device by default. Toggle the button to enable or disable WIFI. Once the Wi-Fi is turned on, the device will search for the available Wi-Fi within the network range. Tap on the required Wi-Fi name from the available list and input the correct password in the password interface, and then tap Connect to WIFI (OK). WIFI Enabled: Tap on the required network from the searched network list.
ProFace X (DS) User Manual Adding WIFI Network Manually The WIFI can also be added manually if the required WIFI does not show on the list. Tap on Add WIFI Network to add the WIFI manually. On this interface, enter the WIFI network parameters. (The added network must exist.) Note: After successfully adding the WIFI manually, follow the same process to search for the added WIFI name. Click here to view the process to search the WIFI network.
ProFace X (DS) User Manual 7.5 Cloud Server Setting Tap Cloud Server Setting on the Comm. Settings interface to connect with the ADMS server. Function Description Function Name Enable Domain Name Disable Domain Name Description Server Address Once this mode is turned ON, the domain name mode "http://... " will be used, such as http://www.XYZ.com, while "XYZ" denotes the domain name. Server Address The IP address of the ADMS server. Server Port Port used by the ADMS server.
ProFace X (DS) User Manual 7.6.1 Wiegand Input Function Description Function Name Descriptions Wiegand Format Its value can be 26 bits, 34 bits, 36 bits, 37 bits, and 50 bits. Wiegand Bits The number of bits of the Wiegand data. Pulse Width(us) The value of the pulse width sent by Wiegand is 100 microseconds by default, which can be adjusted within the range of 20 to 100 microseconds.
ProFace X (DS) User Manual ESSSSSSSSCCCCCCCCCCCCCCCCCCCCCCCCO Wiegand34a It consists of 34 bits of binary code. The 1st bit is the even parity bit of the 2nd to 17th bits, while the 34th bit is the odd parity bit of the 18th to 33rd bits. The 2nd to 9th bits is the site codes, while the 10th to 25th bits are the card numbers. OFFFFFFFFFFFFFFFFCCCCCCCCCCCCCCCCMME Wiegand36 It consists of 36 bits of binary code.
ProFace X (DS) User Manual 7.6.2 Wiegand Output Function Description Function Name Descriptions SRB When SRB is being enabled, its lock is controlled by the SRB to prevent the lock from opening due to device removal. Wiegand Format Its value can be 26 bits, 34 bits, 36 bits, 37 bits, and 50 bits. Wiegand output bits After selecting the required Wiegand format, select the corresponding output bit digits from the Wiegand format.
ProFace X (DS) User Manual 7.7 Network Diagnosis It helps to set the network diagnosis parameters. Tap Network Diagnosis on the Comm. Settings interface. Enter the IP address that needs to be diagnosed and tap Start the diagnostic test to check whether the network can connect to the device. P a g e | 50 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
ProFace X (DS) 8 User Manual System Settings It helps to set related system parameters to optimize the accessibility of the device. Tap System on the Main Menu interface to get into its menu options. 8.1 Date and Time Tap Date Time on the System interface to set the date and time. Tap Date and Time Auto Sync to enable automatic time synchronization based on the service address you enter. Tap Manual Date and Time to manually set the date and time and then tap to Confirm and save.
ProFace X (DS) User Manual Tap Daylight Saving Time to enable or disable the function. If enabled, tap Daylight Saving Mode to select a daylight-saving mode and then tap Daylight Saving Setup to set the switch time. Week Mode Date Mode When restoring the factory settings, the time (24-hour) and date format (YYYY-MM-DD) can be restored, but the device date and time cannot be restored. Note: For example, if a user sets the time of the device (18:35 on March 15, 2020) to 18:30 on January 1, 2021.
ProFace X (DS) User Manual Function Description Function Name Description Choose whether to capture and save the current snapshot image during verification. There are 5 modes: No Photo: No photo is taken during user verification. Take a photo, no save: Photo is taken but not saved during verification. Camera Mode Take a photo and save: All the photos taken during verification is saved. Save on successful verification: Photo is taken and saved for each successful verification.
ProFace X (DS) User Manual 8.3 Face Parameters Tap Face on the System interface to go to the Face parameter settings.
ProFace X (DS) Camera Exposure Settings User Manual Face AE: When the face is in front of the camera in Face AE mode, the brightness of the face area increases, while other areas become darker. WDR: Wide Dynamic Range (WDR) balances light and extends image visibility for surveillance videos under high contrast lighting scenes and improves object identification under bright and dark environments. Anti-flicker Mode: It is used when WDR is turned off.
ProFace X (DS) User Manual Minimum Face Size: It sets the minimum face size required for facial registration and comparison. If the minimum size of the captured image is smaller than the set value, then it will be filtered off and not recognized as a face. This value can also be interpreted as the face comparison distance. The farther the individual is, the smaller the face, and the smaller number of pixels of the face obtained by the algorithm.
ProFace X (DS) Face Algorithm User Manual It has facial algorithm related information and pause the facial template update. Note: 1) Improper adjustment of the exposure and quality parameters may severely affect the performance of the device. Please adjust the exposure parameter only under the guidance of the after-sales service personnel of our company. 2) Face AE and Multi-face identifying are mutually exclusive options.
ProFace X (DS) User Manual Connect to ZSmart APP After downloading and installing the ZSmart APP on your phone, create an User account initially with your Email ID. After creating the User account, log in to the App, and click to add the device. The process is as follows: P a g e | 58 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
ProFace X (DS) User Manual You can add the device by Scanning a code. After the addition is successful, the device is displayed on the terminal page. P a g e | 59 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
ProFace X (DS) User Manual Video Door Phone Connection Visitors tap to make a call and the phone will ring. The user can accept or decline the call. After the user accepts the call, it will open the video door phone interface. Enter the password to unlock the door. Item Description Screenshot Click to take a screenshot. Speak The icon will become blue when you click it, and you can talk to the device at this time. Record Click to record a video.
ProFace X (DS) User Manual Function Description Function Name Description Device Temperature This column shows the real-time temperature of the device. Min. Temp. to SelfHeating Once the device temperature is lower than the set value, the device will start self-heating, the range is 0 to 10(°C). Max. Temp to Shutdown When the device temperature is lower than the set value, it will shut down automatically to protect the hardware, the range is 70 to 90 (°C). 8.
ProFace X (DS) User Manual Enable Capture of Unregistered Person To enable or disable capturing the unregistered person. When enabled, the device will automatically capture the photo of the unregistered person, enabling this feature requires to enable Allow Unregistered People to Access. Trigger External Alarm When enabled, if the user is not wearing a mask, the system will trigger an alarm. Clear External Alarm It clears the triggered alarm records of the device.
ProFace X (DS) User Manual Function Description Function Name Security Mode Standalone Communication SSH User ID Masking Display Verification Name Display Verification Mode Description Select whether to enable the security mode to protect the device and the user's personal information. You can set the device to work offline and hide the user's personal information to prevent leakage during user verification.
ProFace X (DS) 9 User Manual Personalize Settings Tap Personalize the Main Menu interface to customize interface settings, voice, bell, punch state options, and shortcut key mappings. 9.1 Interface Settings Tap User Interface on the Personalize interface to customize the display style of the main interface. Function Description Function Name Description Wallpaper It helps to select the main screen wallpaper according to the user preference. Language It helps to select the language of the device.
ProFace X (DS) User Manual Idle Time To Slide Show (s) When there is no operation, and the time exceeds the set value, a slide show is displayed. The function can be disabled, or you may set the value between 3 and 999 seconds. Slide Show Interval (s) It is the time interval in switching between different slide show pictures. The function can be disabled, or you may set the interval between 3 and 999 seconds.
ProFace X (DS) User Manual New Bell Schedule Tap New Bell Schedule on the Bell Schedule interface to add a new bell schedule. Function Description Function Name Description Bell Status Toggle to enable or disable the bell status. Bell Time Once the required time is set, the device automatically triggers to ring the bell during that time. Repeat Set the required number of counts to repeat the scheduled bell. Ring Tone Select a ringtone.
ProFace X (DS) User Manual 9.4 Punch States Options Tap Punch States Options on the Personalize interface to configure the punch state settings. Function Description Function Name Description Off: Disable the punch state function. Therefore, the punch state key set under Shortcut Key Mappings menu will become invalid. Manual Mode: Switch the punch state key manually, and the punch state key will disappear after Punch State Timeout.
ProFace X (DS) User Manual Tap Shortcut Key Mappings on the Personalize interface to set the required shortcut keys. On the Shortcut Key Mappings interface, tap on the required shortcut key to configure the shortcut key settings. On the Shortcut Key (that is "F1") interface, tap function to set the functional process of the shortcut key either as punch state key or function key. If the Shortcut key is defined as a function key (such as New user, All users, etc.
ProFace X (DS) User Manual Once the Switch cycle is selected, set the switch time for each day, and tap OK to confirm, as shown in the image below. Note: When the function is set to Undefined, the device will not enable the punch state key. P a g e | 69 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
ProFace X (DS) User Manual 10 Data Management On the Main Menu, tap Data Mgt. to delete the relevant data in the device. 10.1 Delete Data Tap Delete Data on the Data Mgt. interface to delete the required data. Function Description Function Name Description Delete Access Records To delete the attendance data/access records conditionally. Delete Attendance Photo To delete the attendance photos of designated personnel. Delete Blocklist Photo To delete the photos taken during failed verifications.
ProFace X (DS) User Manual Delete Profile Photo To delete all the user photos on the device. Delete Wallpaper To delete all the wallpapers in the device. Delete Screen Savers To delete all the screen savers in the device. The user may select Delete All or Delete by Time Range when deleting the access records, attendance photos or block listed photos. Selecting Delete by Time Range, you need to set a specific time range to delete all data within a specific period. Select Delete by Time Range.
ProFace X (DS) User Manual 11 Access Control On the Main Menu, tap Access Control to set the schedule of the door opening, locks control and to configure other parameters settings related to access control. To gain access, the registered user must meet the following conditions: The relevant door’s current unlock time should be within any valid time zone of the user’s period.
ProFace X (DS) User Manual 11.1 Access Control Options Tap Access Control Options on the Access Control interface to set the parameters of the control lock of the terminal and related equipment. Function Description Function Name Gate Control Mode Door Lock Delay (s) Description It toggles between ON or OFF switch to get into the gate control mode or not. When set to ON, the interface removes the Door lock relay, Door sensor relay, and Door sensor type options.
ProFace X (DS) User Manual Verification Mode The supported verification mode includes Password/Card/Face, User ID Only, Password, Card Only, Password+Card, Password/Card, Face Only, Face + Password and Face +Card. Door Available Time Period It sets the timing for the door so that the door is accessible only during that period. Normal Open time Period It is the time-period for "Normal Open" mode, during which the door remains open at all times.
ProFace X (DS) User Manual Tap the grey box to search the required Time Zone and specify the required Time Zone number (maximum up to 50 zones). On the selected Time Zone number interface, tap on the required day (that is Monday, Tuesday, etc.) to set off the time. Specify the start and the end time, and then tap OK. P a g e | 75 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
ProFace X (DS) User Manual Note: 1) The door is inaccessible for the whole day when the End Time occurs before the Start Time (such as 23:57 to 23:56). 2) It is the time interval for valid access when the End Time occurs after the Start Time (such as 08:00 to 23:59). 3) The door is accessible for the whole day when the End Time occurs after the Start Time (such that Start Time is 00:00 and End Time is 23:59). 4) The default Time Zone 1 indicates that the door is open all day long. 11.
ProFace X (DS) User Manual Edit a Holiday On the Holidays interface, select a holiday item to be modified. Tap Edit to modify holiday parameters. Delete a Holiday On the Holiday interface, select a holiday item to be deleted and tap Delete. Press OK to confirm the deletion. After deletion, this holiday does not display on the All-Holidays interface. 11.
ProFace X (DS) User Manual The Door-unlock combination 2 is set as (02 02 04 04 07), indicating that the unlock combination 2 consists of 5 people; the first two are from AC group 2, the next two are from AC group 4, and the last person is from AC group 7. The Door-unlock combination 3 is set as (09 09 09 09 09), indicating that there are 5 people in this combination; all of which are from AC group 9.
ProFace X (DS) User Manual Function Description Function Name Description No Anti-Passback: The Anti-Passback function is disabled, which means successful verification through either the master device or slave device can unlock the door. The attendance state is not saved in this option. Anti-Passback Direction Out Anti-Passback: The user can check-out only if the last record is a check-in record otherwise an alarm is raised. However, the user can check-in freely.
ProFace X (DS) User Manual 12 Attendance Search Once the identity of a user is verified, the access record is saved in the device. This function enables users to check their event logs. Select Attendance Search on the Main Menu interface to search for the required event logs. The process of searching for attendance and blocklist photos is similar to that of searching for event logs. The following is an example of searching for event logs.
ProFace X (DS) 3. Once the record search completes. Tap the record highlighted in green to view its details. P a g e | 81 User Manual 4. The below figure shows the details of the selected record. Copyright©2022 ZKTECO CO., LTD. All rights reserved.
ProFace X (DS) User Manual 13 Print Settings Devices with the printing function can print attendance records when a printer is connected (this function is optional and only implemented in some products). Tap Print on the Main Menu interface. 13.1 Print Data Field Settings Select Data Field Setup on the Print interface. Toggle button to turn on/off the fields requiring a print. P a g e | 82 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
ProFace X (DS) User Manual 13.2 Print Options Settings Select the Printer Options on the Print interface. Toggle button to enable or disable the Paper Cut function. Remarks: To turn on the Paper Cut function, it is required to connect the device with a printer with paper cutting function, so that the printer will cut papers according to the selected printing information while printing. P a g e | 83 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
ProFace X (DS) User Manual 14 Autotest Select Main Menu, tap Autotest. It enables the system to automatically test whether the functions of various modules are working normally, including the LCD, Voice, Camera, and Real-Time Clock (RTC). Function Description Function Name Description Test All To automatically test whether the LCD, Audio, Camera and RTC are working normally.
ProFace X (DS) User Manual 15 System Information On the Main Menu, tap System Info to view the storage status, the version information of the device, and firmware information. Function Description Function Name Description Device Capacity Displays the current device's user storage, card, password and face storage, administrators, records, attendance and blocklist photos, and profile photos.
ProFace X (DS) User Manual 16 Connect to ZKBiosecurity Software 16.1 Set the Communication Address Device side 1. Tap System settings > Network settings > TCP/IP settings in the main menu to set the IP address and gateway of the device. (NOTE: The IP address should be able to communicate with the ZKBioSecurity server, preferably in the same network segment with the server address) 2. In the main menu, click System settings > Cloud server settings to set the server address and the server port.
ProFace X (DS) User Manual Software side Login to ZKBioSecurity software, click System > Communication > Communication Monitor to set the ADMS Service Port, as shown in the figure below: 16.2 Add Device on the Software Add the device by searching. The process is as follows: 1) Click Access > Device > Search, to open the Search interface in the software. 2) Click Search and it will prompt [Searching……]. 3) After searching, the list, the total number of access controllers are displayed.
ProFace X (DS) User Manual 16.3 Mobile Credential After downloading and installing the App, the user needs to set the Server before login. The steps are given below: 1. In [System] > [Basic Management] > [Parameters], set Enable QR Code to ‘’Yes’’, and select the QR code status according to the actual situation. The default is Dynamic, the valid time of the QR code can be set. 2. On the Server, choose [System] > [Authority Management] > [Client Register] to add a registered App client.
ProFace X (DS) 3. User Manual Open the App on the Smartphone. On the login screen, tap [Server Setting] and type the IP Address or the Domain Name of the Server, and its Port Number. 4. Tap the QR Code icon to scan the QR code of the new App client. After the client is identified successfully, set the Client Name, and tap [Connection Test]. 5. After the network is connected successfully, tap [Save].
ProFace X (DS) User Manual The QR code can replace a physical card on a specific device to achieve contactless authentication to open the door. While using this function for the first time, the App will prompt to authorize the modification of screen brightness settings, as shown in the figure: The QR code is automatically refreshed for every 30s, and it also supports manual refresh. Note: For other specific operations, please refer to ZKBioSecurity Mobile App User Manual.
ProFace X (DS) User Manual Appendix 1 Requirements of Live Collection and Registration of Visible Light Face Images 1) It is recommended to perform registration in an indoor environment with an appropriate light source without underexposure or overexposure on the face. 2) Do not place the device towards outdoor light sources like door or windows or other harsh light sources. 3) Dark-color apparels other than the background color are recommended for registration.
ProFace X (DS) User Manual Requirements for Visible Light Digital Face Image Data The digital photo should be straight-edged, coloured, half-portrayed with only one person, and the person should be uncharted and in casuals. Persons who wear eyeglasses should remain to put on eyeglasses for getting photos captured. Eye Distance 200 pixels or above are recommended with no less than 115 pixels of distance. Facial Expression A neutral face or smile with eyes naturally open is recommended.
ProFace X (DS) User Manual Appendix 2 Privacy Policy Notice: To help you better use the products and services of ZKTeco (hereinafter referred as "we", "our", or "us") a smart service provider, we consistently collect your personal information. Since we understand the importance of your personal information, we took your privacy sincerely and we have formulated this privacy policy to protect your personal information.
ProFace X (DS) User Manual 2. All the functions of displaying the biometric information are disabled in our products by default. You can choose Menu > System Settings to set whether to display the biometric information. If you enable these functions, we assume that you are aware of the personal privacy security risks specified in the privacy policy. 3. Only your user ID is displayed by default. You can set whether to display other user verification information (such as Name, Department, Photo, etc.
ProFace X (DS) User Manual Eco-friendly Operation The product's "eco-friendly operational period" refers to the time during which this product will not discharge any toxic or hazardous substances when used in accordance with the prerequisites in this manual. The eco-friendly operational period specified for this product does not include batteries or other components that are easily worn down and must be periodically replaced. The battery's eco-friendly operational period is 5 years.
FCC Warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.