Product Name and Model Number User Manual User Manual Smart Access Control Terminal Date: July 2020 Doc Version: 1.0 English Thank you for choosing our product. Please read the instructions carefully before operation. Follow these instructions to ensure that the product is functioning properly. The images shown in this manual are for illustrative purposes only. For further details, please visit our Company’s website www.zkteco.com. P a g e |1 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
4-inch Visible Light Terminal User Manual Copyright © 2020 ZKTECO CO., LTD. All rights reserved. Without the prior written consent of ZKTeco, no portion of this manual can be copied or forwarded in any way or form. All parts of this manual belong to ZKTeco and its subsidiaries (hereinafter the "Company" or "ZKTeco"). Trademark is a registered trademark of ZKTeco. Other trademarks involved in this manual are owned by their respective owners.
4-inch Visible Light Terminal User Manual relating to the use of the information contained in or referenced by this manual, even if ZKTeco has been advised of the possibility of such damages. This manual and the information contained therein may include technical, other inaccuracies or typographical errors. ZKTeco periodically changes the information herein which will be incorporated into new additions/amendments to the manual.
-inch Visible Light Terminal User Manual About the Company ZKTeco is one of the world’s largest manufacturer of RFID and Biometric (Fingerprint, Facial, Finger-vein) readers. Product offerings include Access Control readers and panels, Near & Far-range Facial Recognition Cameras, Elevator/floor access controllers, Turnstiles, License Plate Recognition (LPR) gate controllers and Consumer products including battery-operated fingerprint and face-reader Door Locks.
4-inch Visible Light Terminal User Manual Document Conventions Conventions used in this manual are listed below: GUI Conventions For Software Convention Bold font > Description Used to identify software interface names e.g. OK, Confirm, Cancel Multi-level menus are separated by these brackets. For example, File > Create > Folder. For Device Convention Description <> Button or key names for devices.
4-inch Visible Light Terminal User Manual Table of Contents 1 SAFETY MEASURES.............................................................................................................................. 7 2 INSTRUCTION FOR USE ....................................................................................................................... 8 2.1 STANDING POSITION, POSTURE AND FACIAL EXPRESSION........................................................................................................
4-inch Visible Light Terminal User Manual 7.2 ACCESS LOGS SETTING .................................................................................................................................................................................46 7.3 FACE PARAMETERS .......................................................................................................................................................................................48 7.4 PALM PARAMETERS .................................
4-inch Visible Light Terminal 1 User Manual Safety Measures The following precautions are to keep the user’s safety and prevent any damage. Please read carefully before installation. 1. Read, follow, and retain instructions - All safety and operational instructions must be properly read and followed before bringing the device into service. 2. Do not ignore warnings - Adhere to all warnings on the unit and in the operating instructions. 3.
4-inch Visible Light Terminal 2 User Manual Instruction for Use Before getting into the Device features and its functions, it is recommended to be familiar to the below fundamentals. 2.1 Standing Position, Posture and Facial Expression The recommended distance The distance between the device and a user whose height is in a range of 1.55m-1.85m is recommended to be 0.3-2m. Users may slightly move forward or backward to improve the quality of facial images captured.
4-inch Visible Light Terminal User Manual 2.2 Palm Registration Place your palm in the palm multi-mode collection area, such that the palm is placed parallel to the device. Make sure to keep space between your fingers. NOTE: Place your palm within 30-50cm of the device. 2.3 Face Registration Try to keep the face in the centre of the screen during registration. Please face towards the camera and stay still during face registration. The screen should look like this: P a g e |9 Copyright©2020 ZKTECO CO.
4-inch Visible Light Terminal User Manual Correct face registration and authentication method Recommendation for registering a face When registering a face, maintain a distance of 40cm to 80cm between the device and the face. Be careful not to change your facial expression. (smiling face, drawn face, wink, etc.) If you do not follow the instructions on the screen, the face registration may take longer or may fail. Be careful not to cover the eyes or eyebrows.
4-inch Visible Light Terminal User Manual • Click • When there is no Super Administrator set in the device, tap • After setting the Super Administrator on the device, it requires the Super Administrator’s verification before entering the menu functions. to enter the User ID input interface. to go to the menu. NOTE: For the security of the device, it is recommended to register super administrator the first time you use the device.
4-inch Visible Light Terminal • User Manual Press the corresponding punch state key to select your current punch state, which is displayed in green. NOTE: The punch state options are off by default and need to be changed to other option in the "8.4 Punch States Options" in order to get the punch state options on the standby screen. P a g e | 12 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
4-inch Visible Light Terminal User Manual 2.5 Virtual Keyboard NOTE: The device supports the input in Chinese language, English language, numbers, and symbols. • Click [En] to switch to the English keyboard. • Press [123] to switch to the numeric and symbolic keyboard. • click [ABC] to return to the alphabetic keyboard. • Click the input box, virtual keyboard appears. • Click [ESC] to exit the virtual keyboard. P a g e | 13 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
4-inch Visible Light Terminal User Manual 2.6 Verification Mode 2.6.1 Palm Verification 1: N Palm Verification mode In this verification mode, the device compares the palm image collected by the palm collector with all the palm data in the device. The device automatically distinguishes between the palm and the face verification mode as the user places his/her palm in the scanning area.
4-inch Visible Light Terminal User Manual If the user has registered face, card and password in addition to his/her palm, and the verification method is set to palm/ face/ card/ password verification, the following screen will appear. Select the icon to enter palm verification mode. Then place your palm for verification. P a g e | 15 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
4-inch Visible Light Terminal User Manual 2.6.2 Facial Verification 1:N Facial Verification In this verification mode, the device compares the collected facial images with all face data registered in the device. The following is the pop-up prompt of a successful comparison result. 1:1 Facial Verification In this verification mode, the device compares the face captured by the camera with the facial template related to the entered user ID.
4-inch Visible Light Terminal User Manual If the user has registered palm, card and password in addition to his/her face, and the verification method is set to palm/ face/card/ password verification, the following screen will appear. Select the icon to enter the face verification mode. After successful verification, the prompt box displays "Successfully verified", as shown below: If the verification is failed, it prompts “Please adjust your position!”. P a g e | 17 Copyright©2020 ZKTECO CO., LTD.
4-inch Visible Light Terminal User Manual 2.6.3 Card Verification 1:N Card Verification The 1:N Card Verification mode compares the card number in the card induction area with all the card number data registered in the device; The following is the card verification screen. 1:1 Card Verification The 1:1 Card Verification mode compares the card number in the card induction area with the number associated with the employee's User ID registered in the device.
4-inch Visible Light Terminal User Manual If the user has registered palm, face and password in addition to his/her card, and the verification method is set to palm/ face/card/ password verification, the following screen will appear. Select the icon to enter the card verification mode. P a g e | 19 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
4-inch Visible Light Terminal User Manual 2.6.4 Password Verification The device compares the entered password with the registered password by the given User ID. Click the button on the main screen to enter the 1:1 password verification mode. Then, input the user ID and press [OK]. If the user has registered palm, face and card in addition to password, and the verification method is set to palm/ face/ card/ password verification, the following screen will appear.
4-inch Visible Light Terminal User Manual Input the password and press [OK]. Following are the display screen after a inputting a correct password and a wrong password respectively. P a g e | 21 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
4-inch Visible Light Terminal User Manual Verification is successful: Verification is failed: 2.6.5 Combined Verification To increase security, this device offers the option of using multiple forms of verification methods.
4-inch Visible Light Terminal User Manual Procedure to set for Combined Verification Mode • Combined verification requires personnel to register all the different verification method. Otherwise, employees will not be able to successfully verify the combined verification process. • For instance, when an employee has registered only the data, but the Device verification mode is set as “Face + Password”, the employee will not be able to complete the verification process successfully.
4-inch Visible Light Terminal 3 User Manual Main Menu on the Standby interface to enter the Main Menu, the following screen will be displayed: Press Function Description Menu Descriptions User Mgt. To Add, Edit, View, and Delete basic information of a User. User Role To set the permission scope of the custom role and enroller for the users, that is, the rights to operate the system. COMM.
4-inch Visible Light Terminal 4 User Manual User Management 4.1 User Registration Click User Mgt. on the main menu. 4.1.1 User ID and Name Tap New User. Enter the User ID and Name. Notes: 1） A name can take up to 17 characters. 2） The user ID may contain 1-9 digits by default. 3） During the initial registration, you can modify your ID, which cannot be modified after registration. 4） If a message "Duplicated!" pops up, you must choose another ID as the enter User ID already exists.
4-inch Visible Light Terminal User Manual 4.1.2 User Role On the New User interface, tap on User Role to set the role for the user as either Normal User or Super Admin. • Super Admin: The Super Administrator owns all management privileges in the Device. • Normal User: If the Super Admin is already registered in the Device, then the Normal Users will not have the privileges to manage the system and can only access authentication verifications.
4-inch Visible Light Terminal User Manual 4.1.4 Face Tap Face in the New User interface to enter the face registration page. • Please face towards the camera and position your face inside the white guiding box and stay still during face registration. • A progress bar shows up while registering the face and a “Enrolled Successfully” is displayed as the progress bar completes. • If the face is registered already then the “Duplicate Face” message shows up.
4-inch Visible Light Terminal User Manual 4.1.5 Card Tap Card in the New User interface to enter the card registration page. • On the Card interface, swiping card underneath the card reading area. The card registration will be successful. • If the card is registered already then the “Duplicate Card” message shows up. The registration interface is as follows: P a g e | 28 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
4-inch Visible Light Terminal User Manual 4.1.6 Password Tap Password in the New User interface to enter the password registration page. • On the Password interface, enter the required password and re-enter to confirm it and tap OK. • If the re-entered password is different from the initially entered password, then the device prompts the message as "Password not match!", where the user needs to re-confirm the password again. Note: The password may contain 1 to 8 digits by default. 4.1.
4-inch Visible Light Terminal User Manual • When a user registered with a photo passes the authentication, the registered photo will be displayed. • Tap User Photo, the device’s camera will open, then tap the camera icon to take a photo. The captured photo is displayed on the top left corner of the screen and the camera opens up again to take a new photo, after taking the initial photo. Note: While registering a face, the system automatically captures a photo as the user photo.
4-inch Visible Light Terminal User Manual 4.2 Search for Users On the Main Menu, tap User Mgt., and then tap All Users to search for a User. • On the All Users interface, tap on the search bar on the user’s list to enter the required retrieval keyword (where the keyword may be the user ID, surname or full name) and the system will search for the related user information. 4.3 Edit User On All Users interface, tap on the required user from the list and tap Edit to edit the user information.
4-inch Visible Light Terminal User Manual NOTE: The process of editing the user information is the same as that of adding a new user, except that the User ID cannot be modified when editing a user. The process in detail refers to "4 User Management". 4.4 Delete User On All Users interface, tap on the required user from the list and tap Delete to delete the user or a specific user information from the device. On the Delete interface, tap on the required operation and then tap OK to confirm the deletion.
4-inch Visible Light Terminal 5 User Manual User Role User Role facilitates to assign some specific permissions to certain users, based on the requirement. • On the Main menu, tap User Role, and then tap on the User Defined Role to set the user defined permissions. • The permission scope of the custom role can be set up to 3 roles, that is, the custom operating scope of the menu functions of the user.
4-inch Visible Light Terminal User Manual • Then, tap on Define User Role and select the required privileges to assign to the new role, and then tap on the Return button. • During privilege assignment, the main menu function names will be displayed on the left and its sub-menus will be listed on its right. • First tap on the required Main Menu function name, and then select its required sub-menus from the list. Note: If the User Role is enabled for the Device, tap on User Mgt.
4-inch Visible Light Terminal 6 User Manual Communication Settings Tap COMM. on the Main Menu to set the Ethernet PC connection, Cloud Server setting and Wiegand. 6.1 Network Settings When the device needs to communicate with a PC over the Ethernet, you need to configure network settings and ensure that the device and the PC are connecting to the same network segment. Tap Ethernet on the Comm. Settings interface to configure the settings. P a g e | 35 Copyright©2020 ZKTECO CO., LTD.
4-inch Visible Light Terminal User Manual Function Description Function Name Descriptions IP Address The default IP address is 192.168.1.201. It can be modified according to the network availability. Subnet Mask The default Subnet Mask is 255.255.255.0. It can be modified according to the network availability. Gateway The default Gateway address is 0.0.0.0. It can be modified according to the network availability. DNS The default DNS address is 0.0.0.0.
4-inch Visible Light Terminal User Manual 6.2 Serial Comm Serial Comm function facilitates to establish communication with the device through a serial port (RS485/ Master Unit). Tap Serial Comm. on the Comm. Settings interface. Function Description Function Name Descriptions no using: Do not communicate with the device through the serial port. Serial Port RS485(PC): Communicates with the device through RS485 serial port.
4-inch Visible Light Terminal User Manual Function Description Function Name Comm Key Descriptions The default password is 0, which can be changed. The Comm Key can contain1-6 digits. Identity number of the device, which ranges between 1 and 254. Device ID If the communication method is RS232/RS485, you need to input this device ID in the software communication interface. 6.
4-inch Visible Light Terminal WIFI Enabled: Tap on the required network from the searched network list. • User Manual Tap on the password field to enter the password, and then tap on Connect to WIFI (OK). When the WIFI is connected successfully, the initial interface will display the Wi-Fi logo. Add WIFI Network Manually The WIFI can also be added manually if the required WIFI is not displayed on the list. Tap on Add WIFI Network to add the WIFI manually.
4-inch Visible Light Terminal User Manual Advanced Setting On the Wireless Network interface , tap on Advanced to set the relevant parameters as required. Function Description Function Name Description DHCP Dynamic Host Configuration Protocol (DHCP) dynamically allocates IP addresses to network clients. If the DHCP is enabled, then the IP cannot be set manually. IP Address IP address for the WIFI network, the default is 0.0.0.0. It can be modified according to the network availability.
4-inch Visible Light Terminal User Manual Function Description Function Name Enable Domain Name Disable Domain Name Description Server Address Once this function is enabled, the domain name mode “http://...” will be used, such as http://www.XYZ.com, while “XYZ” denotes the domain name (when this mode is turned ON). Server Address IP address of the ADMS server. Server Port Port used by the ADMS server.
4-inch Visible Light Terminal User Manual Function Description Function Name Descriptions Wiegand Format Values range from 26 bits, 34 bits, 36 bits, 37 bits, and 50 bits. Wiegand Bits Number of bits of Wiegand data. Pulse Width(us) The value of the pulse width sent by Wiegand is 100 microseconds by default, which can be adjusted within the range of 20 to 400 microseconds.
4-inch Visible Light Terminal User Manual EFFFFFFFFFFFFFFFFFFCCCCCCCCCCCCCCCCO Wiegand36a Consists of 36 bits of binary code. The 1st bit is the even parity bit of the 2nd to 18th bits, while the 36th bit is the odd parity bit of the 19th to 35th bits. The 2nd to 19th bits are the device codes, and the 20th to 35th bits are the card numbers. OMMMMSSSSSSSSSSSSCCCCCCCCCCCCCCCCCCCE Wiegand37 Consists of 37 bits of binary code.
4-inch Visible Light Terminal User Manual Function Description Function Name Descriptions SRB★ When SRB is enabled, the lock is controlled by the SRB to prevent the lock from being opened due to device removal. Wiegand Format Values range from 26 bits, 34 bits, 36 bits, 37 bits, and 50 bits. Wiegand output bits After selecting the required Wiegand format, select the corresponding output bit digits of the Wiegand format.
4-inch Visible Light Terminal 7 User Manual System Settings Set related system parameters to optimize the performance of the device. Tap System on the Main Menu interface to set the related system parameters so as to optimize the performance of the device. 7.1 Date and Time Tap Date Time on the System interface to set the date and time. • Tap Manual time setting to manually set date and time and tap Confirm to save. • Tap 24-Hour Time to enable or disable this format.
4-inch Visible Light Terminal User Manual Week mode • Date mode When restoring the factory settings, the time (24-hour) and date format (YYYY-MM-DD) can be restored, but the device date and time cannot be restored. NOTE: For example, the user sets the time of the device (18:35 on March 15, 2019) to 18:30 on January 1, 2020. After restoring the factory settings, the time of the equipment will remain 18:30 on January 1, 2020. 7.2 Access Logs Setting Click Access Logs Setting on the System interface.
4-inch Visible Light Terminal User Manual Function Description Function Name Description Whether to capture and save the current snapshot image during verification. There are 5 modes: No Photo: No photo is taken during user verification. Take photo, no save: Photo is taken but is not saved during verification. Camera Mode Take photo and save: Photo is taken and saved during verification. Save on successful verification: Photo is taken and saved for each successful verification.
4-inch Visible Light Terminal User Manual 7.3 Face Parameters Tap Face on the System interface to go to the face parameter settings. FRR FAR High Recommended Matching Thresholds 1:N 1:1 Low 85 80 Medium Medium 82 75 Low High 80 70 P a g e | 48 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
4-inch Visible Light Terminal User Manual Function Description Function Name 1:N Match Threshold 1:1 Match Threshold Face Enrollment Threshold Description Under 1:N verification mode, the verification will only be successful when the similarity between the acquired facial image and all registered facial templates is greater than the set value. The valid value ranges from 65 to 120. The higher the thresholds, the lower the misjudgment rate, the higher the rejection rate, and vice versa.
4-inch Visible Light Terminal User Manual LED Light Triggered Threshold This value controls the on and off of the LED light. The larger the value, the more frequently the LED light will be turned on. Motion Detection Sensitivity It is to set the value for the amount of change in a camera’s field of view, which is known as potential motion detection that wakes up the terminal from standby to the comparison interface. The larger the value, the more sensitive the system would be, i.e.
4-inch Visible Light Terminal User Manual 7.5 Factory Reset The Factory Reset function restores the device settings such as communication settings and system settings, to the default factory settings (This function does not clear registered user data). Tap Reset on the System interface and then tap OK to restore the default factory settings. 7.6 USB Upgrade Tap USB Upgrade on the System interface. The device's firmware program can be upgraded with the upgrade file in a USB drive.
4-inch Visible Light Terminal User Manual Note: If upgrade file is needed, please contact our technical support. Firmware upgrade is not recommenced under normal circumstances. 7.7 Device Type Setting Tap Device Type Setting on the System interface. Function Name Description Time Attendance Terminal Set the device as time attendance terminal. Access Control Terminal Set the device as access control terminal. P a g e | 52 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
4-inch Visible Light Terminal 8 User Manual Personalize Settings Tap Personalize on the Main Menu interface to customize interface settings, voice, bell, punch state options and shortcut key mappings. 8.1 Interface Settings Tap User Interface on the Personalize interface to customize the display style of the main interface. Function Description Function Name Description Wallpaper The main screen wallpaper can be selected according to the user preference.
4-inch Visible Light Terminal User Manual Idle Time To Slide Show (s) When there is no operation, and the time exceeds the set value, a slide show will be played. The function can be disabled, or you may set the value between 3 and 999 seconds. Slide Show Interval (s) It is the time interval in switching between different slide show photos. The function can be disabled, or you may set the interval between 3 and 999 seconds.
4-inch Visible Light Terminal User Manual New Bell Schedule Tap New Bell Schedule on the Bell Schedule interface to add a new bell schedule. Function Description Function Name Description Bell Status Toggle to enable or disable the bell status. Bell Time Once the required time is set, the device will automatically trigger to ring the bell during that time. Repeat Set the required number of counts to repeat the scheduled bell. Ring Tone Select a ring tone.
4-inch Visible Light Terminal User Manual 8.4 Punch States Options Tap Punch States Options on the Personalize interface to configure the punch state settings. Function Description Function Name Description Off: Disable the punch state function. Therefore, the punch state key set under Shortcut Key Mappings menu will become invalid. Manual Mode: Switch the punch state key manually, and the punch state key will disappear after Punch State Timeout.
4-inch Visible Light Terminal User Manual 8.5 Shortcut Key Mappings Users may define shortcut keys for attendance status and for functional keys which will be defined on the main interface. So, on the main interface, when the shortcut keys are pressed, the corresponding attendance status or the function interface will be displayed directly. Tap Shortcut Key Mappings on the Personalize interface to set the required shortcut keys.
4-inch Visible Light Terminal • User Manual On the Switch Cycle interface, select the switch cycle (Monday, Tuesday etc.) as shown in the image below. • Once the Switch cycle is selected, set the switch time for each day and tap OK to confirm, as shown in the image below. Note: When the function is set to Undefined, the device will not enable the punch state key. P a g e | 58 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
4-inch Visible Light Terminal 9 User Manual Data Management On the Main Menu, tap Data Mgt. to delete the relevant data in the device. 9.1 Delete Data Tap Delete Data on the Data Mgt. interface to delete the required data. P a g e | 59 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
4-inch Visible Light Terminal User Manual Function Description Function Name Description Delete Access Records To delete attendance data/access records conditionally. Delete Attendance Photo To delete attendance photos of designated personnel. Delete Blocklist Photo To delete the photos taken during failed verifications. Delete All Data To delete information and attendance logs/access records of all registered users. Delete Admin Role To remove all administrator privileges.
4-inch Visible Light Terminal User Manual 10 Access Control On the Main Menu, tap Access Control to set the schedule of door opening, locks control and to configure other parameters settings related to access control. To gain access, the registered user must meet the following conditions: • The relevant door’s current unlock time should be within any valid time zone of the user time period.
4-inch Visible Light Terminal User Manual 10.1 Access Control Options Tap Access Control Options on the Access Control interface to set the parameters of the control lock of the terminal and related equipment. Function Description Function Name Description Toggle between ON or OFF switch to get into gate control mode or not. Gate Control Mode Door Lock Delay (s) When set to ON, on this interface will remove Door lock relay, Door sensor relay and Door sensor type options.
4-inch Visible Light Terminal User Manual Verification Mode The supported verification mode includes Password/Face, User ID only, Password, Face only, and Face + Password. Door available time period To set time period for door, so that the door is available only during that period. Normal open time Period Scheduled time period for “Normal Open” mode, so that the door is always left open during this period.
4-inch Visible Light Terminal • User Manual The Time Zone format of each Time Period: HH MM-HH MM, which is accurate to minutes according to the 24-hour clock. Tap the grey box to search the required Time Zone and specify the required Time Zone number (maximum: up to 50 zones). On the selected Time Zone number interface, tap on the required day (that is Monday, Tuesday etc.) to set the time. P a g e | 64 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
4-inch Visible Light Terminal User Manual Specify the start and the end time, and then tap OK. NOTE: 1） When the End Time is earlier than the Start Time, (such as 23:57~23:56), it indicates that access is prohibited all day. 2） When the End Time is later than the Start Time, (such as 00:00~23:59), it indicates that the interval is valid.
4-inch Visible Light Terminal User Manual Add a New Holiday Tap Add Holiday on the Holidays interface and set the holiday parameters. Edit a Holiday On the Holidays interface, select a holiday item to be modified. Tap Edit to modify holiday parameters. Delete a Holiday On the Holidays interface, select a holiday item to be deleted and tap Delete. Press OK to confirm deletion. After deletion, this holiday is no longer displayed on All Holidays interface. 10.
4-inch Visible Light Terminal User Manual On the combined verification interface, tap the Door-unlock combination to be set, and tap the up and down arrows to input the combination number, and then press OK. For Example: • The Door-unlock combination 1 is set as (01 03 05 06 08), indicating that the unlock combination 1 consists of 5 people, and the 5 individuals are from 5 groups, namely, Access Control Group 1 (AC group 1), AC group 3, AC group 5, AC group 6, and AC group 8, respectively.
4-inch Visible Light Terminal User Manual 10.5 Anti-passback Setup It is possible that users may be followed by some persons to enter the door without verification, resulting in a security breach. So, to avoid such a situation, the Anti-Passback option was developed. Once it is enabled, the check-in record must match with the check-out record so as to open the door.
4-inch Visible Light Terminal User Manual 10.6 Duress Options Once a user activates the duress verification function with specific authentication method(s), and when he/she is under coercion and authenticates using duress verification, the device will unlock the door as usual, but at the same time, a signal will be sent to trigger the alarm. On Access Control interface, tap Duress Options to configure the duress settings.
4-inch Visible Light Terminal User Manual 11 USB Manager You can import the user information, and attendance data in the machine to matching attendance software for processing by using a USB disk, or import the user information to other devices for backup. Before uploading/downloading data from/to the USB disk, insert the USB disk into the USB slot first. Tap USB Manager on the main menu interface. 11.1 USB Download On the USB Manager interface, tap Download.
4-inch Visible Light Terminal User Manual 11.2 USB Upload On the USB Manager interface, tap Download. Function Name Description Screen Saver To upload all screen savers from USB disk into the device. You can choose Upload selected photo or Upload all photos. The images will be displayed on the device’s main interface after upload. Wallpaper To upload all wallpapers from USB disk into the device. You can choose Upload selected photo or Upload all photos.
4-inch Visible Light Terminal User Manual 12 Attendance Search Once the identity of a user is verified, the Event Logs will be saved in the device. This function enables users to check their access records. Click Attendance Search on the Main Menu interface to search for the required Access/Attendance log. The process of searching for attendance and blocklist photos is similar to that of searching for event logs. The following is an example of searching for event logs.
4-inch Visible Light Terminal 1. Enter the user ID to be searched and click OK. If you want to search for logs of all users, click OK without entering any user ID. 3. Once the log search succeeds. Tap the login highlighted in green to view its details. P a g e | 73 User Manual 2. Select the time range in which the logs need to be searched. 4. The below figure shows the details of the selected log. Copyright©2020 ZKTECO CO., LTD. All rights reserved.
4-inch Visible Light Terminal User Manual 13 Autotest On the Main Menu, tap Autotest to automatically test whether all modules in the device function properly, which include the LCD, Voice, Camera and Real-Time Clock (RTC). Function Description Function Name Description Test All To automatically test whether the LCD, Audio, Camera and RTC are normal.
4-inch Visible Light Terminal User Manual 14 System Information On the Main Menu, tap System Info to view the storage status, the version information of the device, and firmware information. Function Description Function Name Description Device Capacity Displays the current device's user storage, palm, password, face and card storage, administrators, access records, attendance and blocklist photos, and user photos.
4-inch Visible Light Terminal User Manual 15 Connect to ZKBioAccess Software 15.1 Set the Communication Address Device side 1. Tap COMM. > Ethernet in the main menu to set the IP address and gateway of the device. (Note: The IP address should be able to communicate with the ZKBioAccess server, preferably in the same network segment with the server address) 2. In the main menu, click COMM. > Cloud Server Setting to set the server address and server port.
4-inch Visible Light Terminal User Manual Software side Login to ZKBioAccess software, click System > Communication > Communication Monitor to set the ADMS service port, as shown in the figure below: 15.2 Add Device on the Software Add the device by searching. The process is as follows: 1） Click Access Control > Device > Search Device, to open the Search interface in the software. 2） Click Search, and it will prompt [Searching……].
4-inch Visible Light Terminal User Manual 15.3 Add Personnel on the Software 1. Click Personnel > Person > New: 2. Fill in all the required fields and click [OK] to register a new user. 3. Click Access > Device > Device Control > Synchronize All Data to Devices to synchronize all the data to the device including the new users. P a g e | 78 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
4-inch Visible Light Terminal User Manual Appendix 1 Requirements of Live Collection and Registration of Visible Light Face Images 1） It is recommended to perform registration in an indoor environment with an appropriate light source without underexposure or overexposure. 2） Do not place the device towards outdoor light sources like door or window or other harsh light sources. 3） Dark-color apparels, different from the background color is recommended for registration.
4-inch Visible Light Terminal User Manual Requirements for Visible Light Digital Face Image Data The digital photo should be straight-edged, colored, half-portrayed with only one person, and the person should be uncharted and in casuals. Persons who wear eyeglasses should remain to put on eyeglasses for getting photo captured. Eye Distance 200 pixels or above are recommended with no less than 115 pixels of distance. Facial Expression Neutral face or smile with eyes naturally open are recommended.
4-inch Visible Light Terminal User Manual Appendix 2 Statement on the Right to Privacy Dear Customers: Thank you for choosing this hybrid biometric recognition product, which was designed and manufactured by ZKTeco. As a world-renowned provider of core biometric recognition technologies, we are constantly developing and researching new products, and strive to follow the privacy laws of each country in which our products are sold. We Declare That: 1.
4-inch Visible Light Terminal User Manual Eco-friendly Operation The product's "eco-friendly operational period" refers to the time during which this product will not discharge any toxic or hazardous substances when used in accordance with the prerequisites in this manual. The eco-friendly operational period specified for this product does not include batteries or other components that are easily worn down and must be periodically replaced. The battery's eco-friendly operational period is 5 years.
No.32,Pingshan Industrial Avenue,Tangxia Town,Dongguan City,Guangdong Province,China 523728 Phone : +86 769 - 82109991 Fax : +86 755 - 89602394 www.zkteco.com Copyright © 2020 ZKTECO CO., LTD. All Rights Reserved.
