User's Manual

KR610D-RS User manual
1 Overview
KR61*D-RS 13.56MHZ Contactless IC card reader, is based on ISO / EM4001 international
standard protocol development of non-contact smart card serial number reader. It uses the company's own
design of high-performance RF card reader circuit design; with a high degree of integration,
anti-interference ability, small size, stable performance, cost-effective features. Can provide RS485 and
Wiegand communication interface for access control, time and attendance, fees, security, Patrol and other
radio frequency identification applications。
2. Features
 The card reader is equipped with a card-reading antenna that works at 13.56MHz.
 The effective distance ranges from 0 to 5cm, depending on the working environment and card type.
 The data receiving time is less than 80ms within the effective distance.
 The card reader adopts the single +12 VDC power supply, and the operating current is less than
100mA.
 The data is output in the standard Wiegand34 bits format by default. The format can be converted
between Wiegand34 and Wiegand66.
 The card reader is produced using the fully closed rubber injecting operation to achieve the
waterproof and moisture-proof effects.
 The effective distance is associated with the voltage of the power supply, used IC cards, and operating
environment.
3. Wire Function Description
Red wire: VCC; +12V
Black wire: GND
Green wire: Wiegand D0
White wire: Wiegand D1
Grey wire: Green LED
Purple wire: Beeper
Yellow wire: NC
Blue wire: 485-
Orange wire ：485+