Guangdong ZK Radio Electronic Tech Co., Ltd APPROVAL SHEET Doc. No.: 202011040002 Customer Name: AKUVOX (XIAMEN) NETWORKS CO., LTD Material Code: R03050002403 Product Name: AM-SMRTCP-RFID Supplier: Guangdong ZK RFID Electronic Technology Co.
Guangdong ZK Radio Electronic Tech Co., Ltd Bantian Street, Longgang District, Shenzhen, China Remarks: Non-Touched Radio Frequency IC Card Reader Module AM-SMRTCP-RFID I、Introduction AM-SMRTCP-RFID is the reader module specialized for non-touched radio frequency IC card with operating frequency 13.56MHZ.The reader module for non-touched smart card was developed based on ISO/IEC14443 international standard protocol.It uses high integration card reading chips,which NXP OM966302HN product.
Guangdong ZK Radio Electronic Tech Co., Ltd Module size Swipe Distance Firmware Version Hardware Version 39mm*19mm(deviation±1mm) S50 Card : 0~5cm,S70 Card : 0~5cm,Ultralight Card:0~1.5cm,NTAG Card:0~2cm,FM11RF08 Card:0~4cm,FM1208 Card:0~4cm,DESfire EV1 Card:0~0.8cm, 15693 Card:0~5cm 。 Remark : 0~L(L≥Lmm)(The actual distance depends on the type of cards and the application environment) V1.11 V1.
Guangdong ZK Radio Electronic Tech Co., Ltd P1 is 7 pin connectors,its pitch is 2.54mm: p1-1 GND p1-2 RX p1-3 TX p1-4 GND p1-5 3.3V p1-6 NC p1-7 NC P2 is 4 pin connectors,its pitch is 2.54mm: ANT TVSS NC NC company address:1004 Room, 3 block B, Tian-an-Yun-Gu, Ban Tian Longgang,Shenzhen,China phone call:0755-29062099 Factory address:Floor 4, Building A, Zhongjin Industrial Park, No.3 South Pusha Road, Shahu Village, Tangxia Town, Dongguan city Website Address: www.zkradio.
Guangdong ZK Radio Electronic Tech Co., Ltd V、Pictures of Real Products Pic 1: Front View of Module Pic 2: Reversed View of Module VI、Package 1.Past the beauty grain adhesive on pearl cotton and fix the labeled product above the beauty grain adhesive,pack them with the way of 4*6 pieces of cotton (refer to Pic 1). 2.Put the pearl cotton into the packing box and pack it in 4 cotton/box (refer to Pic 2).
Guangdong ZK Radio Electronic Tech Co., Ltd Pic 2: company address:1004 Room, 3 block B, Tian-an-Yun-Gu, Ban Tian Longgang,Shenzhen,China phone call:0755-29062099 Factory address:Floor 4, Building A, Zhongjin Industrial Park, No.3 South Pusha Road, Shahu Village, Tangxia Town, Dongguan city Website Address: www.zkradio.
Guangdong ZK Radio Electronic Tech Co., Ltd VII、Contact Information If Any Technical Matters Name:曹剑宝 Name:黄宇凯 Tel:18681498379 Tel:13066865845 QQ:2853815392 QQ:3005371972 company address:1004 Room, 3 block B, Tian-an-Yun-Gu, Ban Tian Longgang,Shenzhen,China phone call:0755-29062099 Factory address:Floor 4, Building A, Zhongjin Industrial Park, No.3 South Pusha Road, Shahu Village, Tangxia Town, Dongguan city Website Address: www.zkradio.
Guangdong ZK Radio Electronic Tech Co., Ltd FCC Warning Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 2.2 List of applicable FCC rules FCC Part 15.225 2.3 Specific operational use conditions This transmitter/module and its antenna(s) must not be co-located or operating in conjunction with any trans mitter. This information also extends to the host manufacturer’s instruction manual. 2.
Guangdong ZK Radio Electronic Tech Co., Ltd company address:1004 Room, 3 block B, Tian-an-Yun-Gu, Ban Tian Longgang,Shenzhen,China phone call:0755-29062099 Factory address:Floor 4, Building A, Zhongjin Industrial Park, No.3 South Pusha Road, Shahu Village, Tangxia Town, Dongguan city Website Address: www.zkradio.
Guangdong ZK Radio Electronic Tech Co., Ltd 2.6 RF exposure considerations This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This compliance to FCC radiation exposure limits for an uncontrolled environment, and minimum of 20cm separation between antenna and body. The host product manufacturer would provide the above information to end users in their end-product manuals. 2.7 Antennas Coil antenna; 0dBi; 13.56MHz 2.
Guangdong ZK Radio Electronic Tech Co., Ltd 2.10 Additional testing, Part 15 Subpart B disclaimer The modular transmitter is only FCC authorized for the specific rule parts (FCC Part 15.225) listed on the grant, and that the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification.
Guangdong ZK Radio Electronic Tech Co., Ltd NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Guangdong ZK Radio Electronic Tech Co., Ltd This radio transmitter [IC: 26721-AMSMRTCP] has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device.