Specifications

ManualsBrandsZK Radio ManualsElectronicsUHF Card Reader & Writer

UR10RW-E and UR10RW-F

are ultra high frequency , readable and writable card issuer which can read

and write data for User Area and EPC Area of UHF tags.

Combined with UHF non-contact radio frequency circuits and various coding and decoding algorithms,this

card issuer can read and write the labels and cards which support EPC global UHF Class1 Gen 2 and ISO

18000-6C standard. Its USB interface adopts the advanced plug and play interface without driver core

technology to connect computer and other equipment.

The card issuer control chip is provided with a watchdog and a voltage detection circuit,and has the

advantage of stable reading performance.

• USB power supply,no drive

• Data

Reception Time:less than 90ms

• Multi-system :Windows,Linux,Android,IOS

•

Wiegand 26 output(

Default);Wiegand 34 (Optional)

•

ith antenna,active

card

search mode

• USB data format output

Model

Card Supporting

Working Frequency

Reading Distance

Protocol

Communication Interface

UR10RW-E UR10RW-F

UHF Tags ,UHF Cards

865MHz-868MHZ 920MHz-925Mhz 20~40CM

valid distance (Determined by the environment and tags) EPC

global UHF Class1 Gen 2, ISO 18000-6C

USB analog keyboard output

Support Working

Supporting Europe standard UHF

reader

Supporting American standard UHF

reader

Working Voltage

DC 5V

（

±4%

）

Working Current

50~300mA

Working Temperature

-10°C ~ +50°C

Storage Temperature

-20°C ~ +80°C

Dimension

107*107*23mm(±1mm) (wire length: 1500mm)

UR10RW-E

（

A34020247

）

UR10RW-F

（

A34020248

）

UHF Card Issuer

Specifications

Features

Summary of content (3 pages)

PAGE 1
UHF Card Issuer UR10RW-F （A34020248） UR10RW-E（A34020247） UR10RW-E and UR10RW-F are ultra high frequency , readable and writable card issuer which can read and write data for User Area and EPC Area of UHF tags. Combined with UHF non-contact radio frequency circuits and various coding and decoding algorithms,this card issuer can read and write the labels and cards which support EPC global UHF Class1 Gen 2 and ISO 18000-6C standard.
PAGE 2
DEMO Configuration Via the demo,user can set output power ,working frequency and data output format for card issuer, also can write and read data information of UHF cards. Notes 1.Though the demo can read and write EPC Area and User Area datas of UHF card, UHF reader just read EPC Area data and output the card number. 2.After the DEMO settings are completed, disconnect the demo ,then you need to wait for 1s to use the text or document to obtain data. 3.
PAGE 3
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.