UR10R UHF Card Issuer Product Instruction
Product Overview UR10R UHF card issuer which can read data for User Area and EPC Area of UHF tags. Combined with UHF non-contact radio frequency circuits and various coding and decoding algorithms, this card issuer can read the labels and cards which support EPC global UHF Class1 Gen 2 and ISO18000-6C standard. Lt’s USB interface adopts the advanced plug and play interface without driver core technology to connect computer and other equipment.
Storage Temperature Product Size -20℃~+80℃ 107mmx107mmx23mm(±1mm) (wire length: 1500mm) DEMO Configuration Via the demo, user can set Read Area, output Format, Wiegand Output bytes parameters for card issuer, also can read data information of UHF cards. Notes 1. The demo can read EPC Area and User Area data of UHF card. 2. After the DEMO settings are completed, disconnect the demo, then you need to wait for 1s to use the text or document to obtain data. 3.
7. The card issuer outputs the EPC byte. (TID/USER (initial address) implemented later in the upgrade.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.