CONTENTS GOING SAME 1 Installing the Batteries 2 Basic Operation AAA AR RAR ARREARS RA HARASS 2 Turning the Unit ON and OFF 2 Creating MUSIC 3 Clearing the effects and resetting the board min d Recording sounds onto the dear cube ...umimesmmsmsenidd Connecting an MP3, iPod or other Music Device woven 5 Setting the Clock, Alarm and Chime Features sum. § CHOCK SQL 3 BIANCA SEE OF Alarm On or Off & Saving a Favorite Alarm MDC.
Carefully remove Zounds from the box, removing all straps and ties and collecting all small pieces to be disposed of properly, Make sure that you are not accidentally throwing away the audio input cable. Read the instructions all the way through before turning ON the toy. This will give you a good overview of how to operate the product before you begin. IMPORTANT: Please retain these instructions for future reference. Getting Started: inside the box you should have the following components.
Battery Installation: CAUTION! Battery installation should only be performed by an adult. See BATTERY INFORMATION section later in this manual for other warnings and information. After removing Zounds from the packaging, locate the battery compare men. Use a Philip head screwdriver to remove the screw over the battery cover. | Insert batteries, paying close attention to i the positive and negative position i of the batteries as indicated in the \ battery compartment, | Insert four (4) AA batteries using the
Creating Music: Turn Zounds ON by pressing the ON/SLEEP button. Place any one of the sculptures on a HOT SPOT to hear the sound it makes. You have three active hot spots on the board. ~All other effects are controlled by the 4 three ouch switches located on the i surface of the board. Lightly touch the MODE button {the one with the circle) 4 to cycle through the 4 modes: VOLUME, i TEMPO,ECHO and REVERB. @ Touch and hold the MODE button to . hear the time announced.
Clearing the effects and resetting the board: if you find that you don't like the effects that you have added to a mix, touching © and holding the MODE and DOWN buttons at the same time will reset the i level of all the effects to the original o settings. You will also hear a sound effect fo indicate that the reset worked, Lc #8 Place the clear square sculpture onto © one of the hot spots.
Connecting an MP3, iPod or other music device: Zounds can act as a speaker for any music device with an 1/8" output (like a headphone jack). Zounds will not only play your music, but it will also add a cool light show that changes and pulses with the music. Plug the AUDIO INPUT CABLE that came with Mountaintop the headphone jack of your music device and into the “audio in” jack on the back edge of the main unit. The volume of the music can be controlled by your music device and the main unit.
Now press MODE to select the correct number of minutes, from one to fifty-nine, using the UP and DOWN arrow buttons. UP moves you forward and DOWN moves you backward through the minutes. Pressing CLOCK/ALARM saves your selection, and returns Zounds to normal play.
Saving your favorite mix: You can save your favorite mix and it will become your alarm. When the alarm goes off, and the unit “wakes up” it will begin to play your saved mix. © Pressing both ON/SLEEP and CLOCK/ o ALARM simultaneously causes Zounds I to remember the current mix and use it as the alarm (if the alarm is active).
When sleep mode is turned ON, the unit will go to sleep after the given number of minutes that you selected. Connecting DC Power Adapter: (optional, purchased separately) Your Zounds unit is equipped to use a 9V, 500mA AC to DC power adapter (central positive) if you choose. An appropriate adapter can be found at your local electronics store. Please have an adult check carefully to be sure that the adapter has the correct voltage and has the correct connector on the end.
Batteries are to be inserted with the correct polarity. Exhausted batteries are to be removed from the toy. The supply terminals are not to be short-circuited. Replace with new batteries at the first sign of erratic operation. Information to User: Caution: changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Room UG202, : nm China them Golden Plaza; Due to small parts 77 Moody Road, Sweatsuit Eos, } .