Product Specs

Product Specification
Temperature Measure Range: 0 ℃~ 60℃
Humidity Measure Range: 0% RH~99% RH
Temperature Accuracy: +
LED Indicator: Blue
1. Use your smartphone to scan QR code, or search
“Smart Life” app in Google Play Store or APP Store to
download and install.
2. Create an account with your mobile number and
authentication code.
How to set up:
3. Connect your mobile to your Wi-Fi router , connect the USB
cable to USB power source, click “+” in the upper right corner
of homepage or click “Add Device” .
Size : 78*78MM
Checklist before using the device:
a. Your smartphone has connected to a 2.4GHz Wi-Fi.
b. You have input the correct Wi-Fi password.
c. Your smartphone must be Android 4.4 + or iOS 8.0 +.
d. Your Wi-Fi router is MAC-open.
e. If the numbers of devices connected to Wi-Fi router reach
the limit, you can try to disable a device to vacate the
channel or try with another Wi-Fi router.
Smart Life
-4-
-3-
-1-
Size: 80*80*16mm Cable: 1.5M length
Micro Input: DC 5V/1A
Wi-Fi Protocol: 2.4GHz
Wi-Fi Standard: IEEE 802.11 b/g/n
Functions
QR Code
-6-
Model: TH16
-
1℃
+
5% RH
-
Humidity Accuracy:
4. 1) Turn on the bluetooth in mobile:
The app will advise you to turn on the bluetooth in your
mobile, then you choose the device to add. enter into your
Wi-Fi name and Wi-Fi password, it will connect the network
automatically.
3) If your Wi-Fi router open both 2.4GHz and 5GHz with the same
name, enter Wi-Fi password, please select “AP Mode”, hold the
reset button for about 5 seconds till LED indicator blink slowly,
connect your mobile to the device’s hotspot: “SmartLife-XXXX” ,
then click to return to App interface, it will connect to Wi-Fi
automatically,configuration complete.
-10--9--8-
-7-
2) Do not turn on the bluetooth:
5. Third-party Voice Control
Works with amazon alexa and google assistant.
FAQ
-11-
1. Intelligent Linkage
When the ambient environment change, you can execute
intelligent linkage. For example, when the room temperature
surpass 35
℃
, the air-conditioner will open automatically or
when the humidity lower than 20% RH, the humidifier will spray.
3. Screen Display
-2-
4. Temperature Scale Switch
You can switch temperature scale between ℃and
press of the reset button once. The temperature value will
F
。
About 30 minutes after Wi-Fi configuration, the temperature
and humidity is closer to the actual ambient environment.
the readings are more accurate. You can real-time monitor
the data on screen directly, and view the records.
1. When the temperature and humidity displayed on the
screen is more accurate?
About 30 minutes after configuration completed, the temp
and humidity displayed on the screen is closer to actual
ambient environment, so the readings are more accurate.
2. After temperature scale switch, the temperature value
shown on screen and in app will sync?
change accordingly after switch, and you can only see on
the screen, there is no change in the App.
the temperature value will change accordingly after switch,
and you can only see on the screen, no change in the App.
5. Please keep the sensor away from any heat source.
through
2. Backlight Display
when the object pass through the infrared inductive area
less than 5CM away, the backlight will be triggered and
last for about 10s. So you can see the data on the screen
clearly at night.
when the object pass through the infrared inductive area
less than 5CM away, the backlight will be triggered and last
for about 10 seconds.
Please don’t use hard or sharp objects to touch the screen,
and prevent it from falling on the floor, otherwise, these
actions may cause damage to the screen, and influence
its usage.
3. When the backlight will be triggered ?
4. Can we touch the screen with hard or sharp objects or drop
it down on the floor ?
Select ”Temperature and Humidity Sensor(Wi-Fi)” from
“Sensors”, enter into the Wi-Fi password, make sure LED
indicator is blinking rapidly, if not, please open the stand at
the back, hold the reset button for about 5s till LED indicator
blink rapidly. it will connect.
-14--13--12-
Product Presentation:
Infrared Inductive area
Hook groove
Flexible stand
Temperature & Humidity Sensor
with LCD Screen & Backlight
Reset Button
(Switch between and
)
F
。
C
。
1.5M length