Specifications

Door Window Sensor
Thanks for choosing our wifi smart door window sensor,
which will provides you a whole-home security.
Please read this manual carefully before use and keep
it for future reference.
Specification:
Material: ABS
Size: 71*25*20mm (Main body）
36*10*17mm (Small body)
Battery: LR03-1.5V/AAA*2 (Alkaline battery)
Battery Life: 6000 times trigger
Standby Current: 8uA
Alarm Current: 70mA 120mA
Wireless Type: 2.4GHz
Wireless Standard: IEEE 802.11b/g/n
Working Temperature: 0
Working Humidity: 20% 85% RH
Storage Temperature: 0
°C 40°C
1. Low Voltage Remind
When the battery level is low, it will remind you to
change batteries, never worry about running out of
battery.
2. Push Notification
Push instant notification to your phone immediately
when door or window is opened or closed. Keeping
you informed all the time.
3. Alarm Alert
Whenever the sensor is triggered to open/close, it will
send alarm to alert you that someone open your door
or window.
4. Alarm Recording
Support checking open/close records in the app.Never
worry about missing any important moments.
5. Device Sharing
Select “Home Management” in the “Me” page to share
your added sensors with your family members, so they
can also monitor the status of doors/windows anytime
when you are outside.
2
°C 60°C
Storage Humidity: 0% 90% RH
Supports Android 4.4 and iOS 8.0 or newer
LED Indicator
Reset Button
Small body
Main body
(32℉～140℉）
(32℉～104℉）
～
～
～
～
～
Model: D06
6. Works with amazon alexa and Google assistant.
How to Use
1.
If the LED indicator is not flashing rapidly, hold the
reset button for about 6 seconds till the LED indicator
flash rapidly.Enter Wifi name and password,then click
“Confirm”. it will connect to your wifi. Once connection
completed, push the back cover to close the battery
compartmemt.
“ Contact Sensor (Wi-Fi) ”
under “Contact Sensor” type from“Security & Sensors”.
Slide to open the back cover of battery compartment
of the main sensor, take out the insulation sheet .
(Notes: when the batteries are run out, please choose
Alkaline battery instead of Carbon-zinc battery
.)
Insulation sheet
5. Peel off the 3M adhesive tapes to mount the sensors
onto the frame of door/window or secure them with the
screws. make both bodies as close as possible.
How to Set up
4
click
the gap between two bodies
is
10mm