Zipabox2 + Z-wave module + 4G module zb2.main + zb2.zw + zbm.zw + zbm.4G Quick-Start Guide v1.
MEET YOUR ZIPABOX2 CONNECT EVERYTHING Zipato Zipabox2 lets you easily monitor, control and secure your home from anywhere in the world. The free Zipato smart home app lets you run your home from your smartphone, get important notifications about what’s happening and control things in every room. With Zipabox2 you can connect various devices by using various communication protocols and control them from your smartphone, no matter where you are. SMART HOME SERVER 24/7 CLOUD SERVER MOBILE APP Model No.
1.0. | INSTALLATION PACKAGING CONTENT - Power adapter 115/230 AC to 12V DC - Ethernet cable - Antenna* for Z-wave network (*optional) 1.1. HOW TO FIND THE SERIAL NUMBER Your serial number is located on the left side of the Zipabox2, make a note of it as it will be required when registering your server online. The unit is now in WiFi AP (access point) mode. Use your mobile phone or PC to connect to this AP. AP name is in this form: Zipabox2-.
1.2. MOUNT ANTENNA* - screw Z-Wave antenna to antenna connector (*if included) 2.0. | MOUNTING 1.3. POWER UP 2.1. WALL MOUNTING Plug the power adaptor into mains supply wall socket and the other end into server.
01 02 01 Upper fitters Lower fitters 3.0. | ACCOUNT CREATION AND REGISTRATION To benefit from Zipato Smart Home services you will need to set up your Zipato account, create your Smart Home System and register your Zipabox2. 02 3.1. REGISTER YOUR ACCOUNT Option A) Start with the free Zipato smart home application, click on the “Register” button and create a new account. 2.3. TABLE TOP You can place your Zipabox2 on any table top.
5.0. | SPECIFICATIONS SYSTEM ARM Cortex-A7 Quad-Core 1.3GHz CPU 256MB RAM 4GB FLASH NETWORK Ethernet 100BASE-TX WiFi 802.11 bgn Bluetooth 4.0 Radio module (Z-Wave, ZigBee, EnOcean, 433 MHz, etc...)* OPERATING SYSTEM Linux (4.1x kernel) ACCESSORIES CAT5e UTP patch LAN Cable Antenna (Z-Wave, ZigBee, EnOcean, 433 MHz, etc...)* *optional models POWER Power input: 9-12VDC Internal backup battery (900mAh) Power supply input: 100-240VAC, 50/60Hz Power usage: Idle: 1.2W, Max: 2.
6.0. | SAFETY Disconnect the network cable and power adapter or any other connected peripherals if any of the following conditions exist: • The power cord or connector is damaged or frayed. • The Zipabox2 or cables are exposed to rain, water/fluids, or excessive moisture. • The Zipabox2 power adapter is damaged and you suspect it needs to be serviced. • Avoid installing the Zipabox2 near or inside sources of electromagnetic interference. 6.1.
Disclaimer Some content and services accessible through this device belong to third parties and are protected by copyright, patent, trademark and/or other intellectual property laws. Such content and services are provided solely for your personal non-commercial use. You may not use any content or services in a manner that has not been authorised by the content owner or service provider.
ANY BREACH OF THIS WARRANTY, EVEN IF COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION AND EXCLUSIONS MAY NOT APPLY TO YOU. TO THE EXTENT PERMITTED BY APPLICABLE LAW, TRI PLUS GRUPA DISCLAIMS ANY AND ALL STATUTORY OR IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND WARRANTIES AGAINST HIDDEN OR LATENT DEFECTS.
RF output power: This product can be used across EU member states. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
20 ZIPABOX QUICK INSTALLATION GUIDE make your home smart www.zipato.com www.zipato.