Wireless USB Adapter user’s manual 1. Install the driver a. Insert the installation CD into your CD-ROM driver,Double click the icon to start setup. b. c.
d. Choose optimize for wifi mode and click next to go on e.
f. Click Finish to end the setup 2. Plug in your usb wireless LAN adapter,it will be recognized and auto installed..
3.
You can click the button Rescan to find which AP is in range,the will show on the window,choice one you want to connect,and click the button connect. An infrastructure connection is accomplished.
setting),you will never find the AP,and you will have to choose ch1-ch13 seting in Advanced page as below. 4.
5.
● A ● B
● C 5.
● B You will get ● C Fill the IP address blank,example as
below: ● D Click ok to finish the setup
5.3 Ad-Hoc setup for one point accomplished 5.4 Setup another Ad-hoc point as step A、B、 C、D. 5.5 Ad-hoc mode link accomplished.And you can visit each other. Note:To make an Ad-Hoc mode link.Do remember to choice the same channel.Its static IP address should be in the same netsub,and the SSID should be the same too.
Product Description WL0183 is designed to provide a high-speed and unrivaled wireless performance for your computer. With a faster wireless connection, you can get a better Internet experience, such as downloading, gaming, video streaming and so on. Use the most advanced wireless networking technology IEEE802.11n (Draft 2.0) standard. When 802.11n devices are in both connection ends, MIMO technology utilizes twice radio wave length band to increase three times transmission speed.
being exposed. It is a perfect solution for small office and home needs. Product Features Complies with IEEE 802.11n (Draft 2.0), IEEE 802.11g, IEEE 802.11b standards. Provides USB v2.0 interface 150Mbps wireless transmission rate Provides two methods of operation: Infrastructure and AD-Hoc. Adopts CCA technology which automatically avoids channel conflicts using its channel selection feature.
Authentication, IEEE 802.1X Simple Configuration and monitoring Supports Windows2000,XP 32/64,Vista 32/64,Win7 32/64, Linux, Mac Seamlessly compatible with 802.11b/g/n devices USB Cabel Product Specification Standard Modulation Type Standard IEEE802.11N, IEEE802.11G, IEEE802.11B OFDM/CCK/16-QAM/64-QAM IEEE802.11N, IEEE802.11G, IEEE802.11B Interface USB v2.0 Frequency 2.4~2.
11n: Up to 150Mbps Data Rate 11g: Up to 54Mbps 11b: Up to 11Mbps 64/128/152bitWEP, Data Security WPA/WPA2 WPA-PSK/WPA2-PSK(TKIP/A ES) WPS(wi-fi Protected system) LED Indicator ACT (Connect with flashing) 11g:15±1dbm;11b:18±1d Wireless bm; RF Power 11n:13±1dbm Work Ad-Hoc Mode Infrastructure Chipset Ralink3070 WPS One-touch button Antenna 1* detachable antenna
150M: -68 dBm@10% PER 130M: -68 dBm@10% PER Receiver Sensitivity 108M: -68 dBm@10% PER 54M: -68 dBm@10% PER 11M: -85 dBm@8% PER 6M: -88 dBm@10% PER 1M: -90 dBm@8% PER Operating System Windows2000, XP32/64, Vista 32/64, Win7 32/64, Linux, Mac Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: Environ ment -40~70℃ (-40℉~158℉) Relative humidity: 10%~90% non-condensing Storage Humidity: 5%~95% non-condensing
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
-Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
RF exposure limits this device must not be co-located or operating in conjunction with any other antenna or transmitter. When using this device in laptop/notebook computers, user must not simultaneously operate wireless products in adjacent USB-ports or cardbus slots. This equipment complies with Part 15 of the FCC Rules.
unauthorized modifications to this equipment. Such modifications could void the user equipment.