User's Manual

Uniwave Understanding Alarms & Reporting

User Manual

13.4 SNMP

An SNMP interface supports integration with higher order NMS applications such as Network Operation

Center software, used to remotely monitor all of the hubs and POIs within the DAS. Security features

such as separate user classes and secure communications via SSH & SSL are provided, along with

support for secure SNMP v3. Local diagnostics are also available via LEDs indicating equipment status

on the Hubs for rapid fault isolation.

There are three sections of interest within the MIB tree:

1. The hub3000 section supports an SNMP V2 MIB interface, which offers simple polling of the

alarm relay state and current fault description. This section is compatible with earlier Zinwave

3000 DAS products. The definition for this interface is provided in the ZINWAVE-MIB file

(supplied as zw5000-5.14_mib.txt)

2. The hub3000extended section requires an SNMP V3 connection, and is also compatible with

Zinwave 3000 DAS products running V4.74.

3. The UNITIVITY5000-MIB section contains extensions added to the Zinwave 5000 DAS. Both

the ZINWAVE-MIB file and the UNITIVITY5000-MIB file (e.g. UNITIVITY5000-5.14_mib.txt)

must be loaded in order to use it.

SNMP Get and SNMP Traps are currently supported, the following tree view shows the structure of the

interface:

13.4.1 SNMP V3 Manager Configuration

The following are the required SNMP details when connecting to the SNMP Agent running on a hub:

• Target Host IP Address: < Zinwave DAS system > e.g. 192.168.0.2

• Port: 161

• SNMP Version: 3