User's Manual

Uniwave Initial System Setup

User Manual

This is the IP address of the NTP server used to synchronize the time.

Time Zone

Select your Time Zone from the pre-defined drop-down list. Ignore the "Custom TZ String" field if your Time Zone

is available. If your Time Zone is not available please contact Zinwave, who will provide a custom TZ string.

Note: Any change to the Date & Time configuration will result in the Hub restarting.

European daylight saving starts on the last Sunday of March and ends the last Sunday of October. US daylight

saving starts on the second Sunday of March and ends the first Sunday of November.

10.6.6 Security Settings

Current User

The user currently logged into the GUI.

Inactivity Timeout

This option allows the user to set a period of allowed inactivity before the user is logged out from the Hub. There

is a warning message displayed one minute before the timeout during which the user can select to stay logged in

or confirm logout. One of four time periods can be set - 15, 30, 45 or 60 minutes. Alternatively, the user can select

'Keep me logged in' but this option is only recommended where security is not a concern.

Password

You can change the password for the users your account is authorized to change by selecting the user whose

password is to be changed using the “Select user password to change” drop-down. Then, type the new password

in the two password fields and click the "Update" button.

If the current user has no rights to set a password, then no password entry fields will be displayed.

10.7 Alarms Setup

On this GUI screen, the user can define how alarm LEDs and relays are handled. Alarms can be one

of three types: Loss of Service, Service Warning and Hardware Warning.

Alarms can be customized and allow the user to select whether individual alarms from a specific

category will activate the Fault or Warning relay or will be ignored.

Clicking Restore Default sets all values to the factory default values:

• Service Warning LED - Amber

• Hardware Warning LED - Amber

• Relay for Loss of Service - Fault

• Relay for Service Warning - Warning

• Relay for Hardware Warning – Warning

10.8 System Maintenance

Note: Any actions executed from this page will result in the DAS service being temporarily