User's Manual

Uniwave Initial System Setup

User Manual

o Service Module (SM) - Provides interface for RF services from BTS, etc. The table

also shows input Transport Modules (TMs)

o Optical Module (OM) - Provides optical links to a Secondary Hub or Remote Unit.

The table also shows any output Transport Modules (TMs).

• Secondary Hub (SH): Fans out optical links from the PH to up to 8 Remote Units per SH.

• Remote Unit (RU): Provides RF connections to antennas for Tx/Rx to RF devices.

• Downstream Primary Hub (PH0x): The tree shows other Primary Hubs that are connected

to receive Services from this Primary Hub (a.k.a. UniTransport Hub).

10.5 Event Log

The event log page provides a history of the last 500 events recorded by the Hub.

In this page, the user can “Download Event Log” as an event/log text file and “Download System Log”

as a rawlog.zip compressed text file. This zipped file contains at least 15 minutes of system logging

data immediately prior to the “Download System Log” button being clicked. System Logs may be sent

to Zinwave to facilitate diagnosis of system issues. System Logging is disabled by default and should

be enabled only where a problem is suspected.

Ensure that the System Log is downloaded within 15 minutes of the occurrence of the issue that

is to be investigated by Zinwave.

Event Log filtering can be enabled to avoid some repetitive warnings/alarms filling up the Event Log.

For example, by customizing the Service Warning Alarm Relay to ‘ignore’ Uplink AGC service warnings

on the RUs, and then enabling Event Log filtering, it is possible to eliminate unwanted AGC warnings

from the Event Log.

10.6 Hub Setup

On this GUI screen, the user can Restart the Primary Hub, set the IP network settings, configure the

SNMP Traps, choose between a secure (https) or insecure (http:) connection, set the Date & Time and

configure the User Security Settings.

10.6.1 Restart Hub

Click the 'Restart Hub' button to reboot the Primary Hub.

10.6.2 IP Settings

IP Address

The address of the Hub on the network. Ensure that it does not clash with an existing device on the network.

Subnet Mask

This defines how IP addresses are partitioned on your network.

Gateway Address

The address of a router on your network that provides access to other networks and/or the internet. If you do not