Manualshelf

User's Manual

ManualsBrandsZinwave ManualsComputers & Accessories308-0007-2 Distributed Antenna System Remote Unit
51525354555657585960
Uniwave Installing Remote Units
User Manual
Copyright © 2022 Zinwave. All rights reserved. 6-6
To connect the PSU to the Remote Unit.
1. Connect/plug the cable to the appropriate connector on the PSU or Secondary Hub.
2. Route the cable from the PSU / Secondary Hub to the Remote Unit.
3. Plug the cable into the 48V connector on the Remote Unit.
4. Repeat for each PSU / Secondary Hub to Remote Unit connection. Once power is plugged in,
the unit is powered on.
Note: It is recommended to connect fiber prior to powering on the Remote Unit.