User's Manual

Uniwave
User Manual
Copyright © 2022 Zinwave. All rights reserved. 3-15
Left
Middle
Right
Status
Off
Off
Dull
Red
Initial power-up. Power present on Hub allowing
Transport Module to be detected; or
Transport Module NOT Enabled through System Setup.
Off
Off
Green
Transport Module successfully detected, starting
discovery of downstream Primary Hub.
Off
Red
Green
Potential communication failure state: No incoming light
on fiber or no messages from upstream UniTransport
Hub.
Off
Red
Flash
Green
Potential failure state: Hardware Warning Alarm is
present on this Transport Module.
Off
Green
Green
Transport Module is connected to active upstream
UniTransport Hub.
3.5 Remote Unit LEDs
There is a single LED on the Remote Unit visible at the fiber end plate.
LED
Color
Description
Off
No power to Remote Unit
Red
No connection to Hub
Red Flash
Alarm active
Alternate Red/
Green
Associating with Hub
Green Flash
Unit successfully associated with Hub.
Optical link calibration and auto-setup in progress, and/or Remote Unit radio
transceiver disabled.
Green
Remote Unit fully operational