User's Manual

Uniwave Understanding the Components
User Manual
Copyright © 2022 Zinwave. All rights reserved. 2-6
Rear View
2.4 Transport Module
The Transport Module provides the fiber link between two cascaded Primary Hubs. The Transport
Module is visually similar to an Optical Module, but with internal hardware differences to permit it to
also perform the job of a Service Module. It is not interchangeable with an Optical Module. A pair of
Transport Modules is required to create a UniTransport link.
Up to 8 Transport Modules can be installed in the front of a Primary Hub, or up to 4 Transport Modules
in the rear of a Primary Hub. It is not permitted to fit Transport Modules into both front and rear of the
same Primary Hub.
Front View
Transport Modules are intended to connect via Zinwave patch cords.
Number
Description
1
Floating BMA RF Connector
2
Floating BMA RF Connector
3
Multi pin Data and Power Connector
Number
Description
1
Status LEDs
2
Optical Fiber connector (Duplex SC-APC/SC-
APC connector)
3
Retaining Screw