User's Manual

Uniwave Specifications
User Manual
Copyright © 2022 Zinwave. All rights reserved. 15-1
15 Specifications
System RF Parameters
System Bandwidth (Part No.
308-XXXX)
150 MHz to 6000 MHz
System Band Gain Flatness
±1 dB
In any 100 MHz band
Wideband Gain Flatness
-5 dB / +1 dB
Downlink
Gain (Part No. 308-XXXX)
29 dB (max)
1dB steps
RF Input Power to Service
Module
-25 dBm (min) to
+15 dBm (max)
Working input power to Service
Module
RF output power at Remote
Unit Tx port (Part No. 308-
0007)
simultaneously :
+21 dBm (F < 1575 MHz)
+24 dBm (1575 MHz < F < 2700 MHz)
+23 dBm (3300 MHz < F < 6000 MHz)
Composite Power at Remote Unit
Output for services approved to FCC
simultaneously :
+19 dBm (F < 1575 MHz)
+22 dBm (1575 MHz < F < 2700 MHz)
+21 dBm (3300 MHz < F < 6000 MHz)
Composite Power at Remote Unit
Output for services approved to CE
Uplink
Gain (Part No. 308-XXXX)
29 dB (max)
1 dB steps
RF input level to Remote
Unit Rx port
+10 dBm (max)
Overload condition. Signal internally
limited to -20dBm max by Remote Unit
Uplink AGC
RF output power from
Service Module
+5 dBm (max)
Output power of Service Module in
Hub
Fiber Optic
Number of optical ports
Up to 8 duplex ports supported on Primary Hub (Optical Modules); 9 duplex ports
on Secondary Hub; 1 duplex port on Remote Unit; SC-APC / SC-APC connectors
(except 308-XXXX has LC/APC connectors)
Wavelength
1310 nm
Fiber types supported
Single-mode (SM) cable 9/125 µm
Fiber distance
5 dBo optical link budget, distance dependent on fiber type & quality (typically 2
km)
Laser safety classification
Class 1, IEC 60825-1:2014
Connectivity
Primary Hub
RF Service connection: 2 N-type female connectors (1 pair per Service Module,
maximum 4 Service Modules supported)
Optical interconnect (Primary Hub to Secondary Hub, or Primary Hub to Remote
Unit): duplex fiber SC-APC / SC-APC connector (1 per Optical Module, maximum
8 Optical Modules supported)
10/100 Base-T Ethernet connection: 1 RJ45 connector