User's Manual

Industry Canada User Manual Statements

The nominal passband gain is 25 dB and the nominal bandwidth is 150 MHz to 2.94 GHz.

The rated mean output power is 20 dBm and the input and output impedances are 50 ohms

The Manufacturer's rated output power of this equipment is for single carrier operation. For

situations when multiple carrier signals are present, the rating would have to be reduced by

3.5 dB, especially where the output signal is re-radiated and can cause interference to

adjacent band users. This power reduction is to be by means of input power or gain reduction

and not by an attenuator at the output of the device."

FCC compliance and interference statements

Hub. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1) This device must accept any interference and

2) This device must accept any interference received including interference that may cause undesired

operation

Changes or modifications not expressly approved by Zinwave Ltd. could void the user’s authority to operate the

equipment.

Remote Unit. This device complies with Part 22, Part 24, Part 27, Part 74 and Part 90 of the FCC rules.

Changes or modifications not expressly approved by Zinwave Ltd. could void the user’s authority to operate the

equipment. For a list of services, please contact Zinwave.

 This device must only be used with antennas having a maximum gain of 8 dBi

 When operating on channel or channels under 47CFR part 90 as identified in the table below, this is a

Class B booster as defined in 47CFR90.219.

o Class B boosters must be registered with the FCC prior to operation, which can be done at the

FCC Part 90 Class B Signal Booster Registration & Discovery website:

https://signalboosters.fcc.gov/signal-boosters/

 When operating on channel or channels under 47CFR parts 22, 24, 27 or 74 as identified in the table

below, this is an Industrial Booster as per 47CFR part 20.

Part 90 Signal Boosters THIS IS A 90.219 CLASS B DEVICE

WARNING. This is NOT a CONSUMER device. It is designed for installation by

FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or

express consent of an FCC Licensee to operate this device. You MUST register

Class B signal boosters (as defined in 47 CFR 90.219) online at

www.fcc.gov/signal-boosters/registration. Unauthorized use may result in

significant forfeiture penalties, including penalties in excess of $100,000 for

each continuing violation.

See User Manual for more information

WARNING. This is NOT a CONSUMER device. It is designed for installation by

FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or

express consent of an FCC Licensee to operate this device. Un authorised use

may result in significant forfeiture penalties, including penalties in excess of

$100,000 for each continuing violation

PAGE 1
Industry Canada User Manual Statements The nominal passband gain is 25 dB and the nominal bandwidth is 150 MHz to 2.94 GHz. The rated mean output power is 20 dBm and the input and output impedances are 50 ohms The Manufacturer's rated output power of this equipment is for single carrier operation. For situations when multiple carrier signals are present, the rating would have to be reduced by 3.5 dB, especially where the output signal is re-radiated and can cause interference to adjacent band users.
PAGE 2
Remote units with FCC ID:UPO302-1107 only support services in the following bands of operation: Rule Part Band VHF Public Safety Downlink Frequency Range (MHz) 150.05 - 150.8 150.8 – 162.0125 162.0125 – 173.2 173.2 – 173.4 173.4 – 174.0 406 - 420 421 - 430 90 UHF Public Safety 456 – 470 470 –512 Service Modulation P25 C4FM (QPSK) FM FM ±2.5kHz dev'n P25 C4FM (QPSK) FM FM ±2.5kHz dev'n FM FM ±5.0kHz dev'n P25 C4FM (QPSK) FM FM ±2.5kHz dev'n FM FM ±5.