User's Manual

Fast Guide
ZillionTrace-28E
Item List
User Manual×1
Product Introduction Function Introduction
Signal Light
01.
Activation
ZT-28E needs to be activated.
How: Pull out the activation tag on
the back of the device. The signal
light in the front of the device will
flash after activation to indicate the
first data report, and then turn off.
02.
Charging
ZT28-E uses a Type-C USB charging
cable to charge.
How: Connect the device and a 5V
charger using a Type-C charging cable .
The Charging Indicator will light up
during the process, and turn off upon
charging completion.
Charging Cable ×1
Attention Specifications ServiceHow to Use
Place the device inside the container or asset
to be monitored. Device will collect data
according to business rules configured on the
management portal.
1. Device uses 2G and LTE-M
communication; in areas without 2G/LTE-M,
device will cache data.
2. Please do not place device below -30 or
above 60 for extended period of time.
3. Please charge the device in an
environment where temperature is within 5 -
30 .
4. Information on sensor accuracy is from
sensor manufacturers; accuracy on site may
vary.
5. Device needs to be charged using proper
power source.
6. Do not submerge the device in water.
Size: L*W*H 92*79*12(mm)
Weight: 105g
Dust and water protection: IP67
Standard Report Interval: 5min-24h
Active Report Interval: 5min-24h
Temperature: -35 -+75 (±0.5 )
Location Method: Advanced + GSM
Door Monitoring: Add-on door module
Communication: 2G and LTE-M
(Supports all 5G Cellular Communication
Frequency bands)
Battery: 3000mAh lithium polymer
Battery Charging: 5V(DC 1.6A)
Contact us:
ZillionSource Technologies Co., Ltd.
Service Hotline: [phone]
Email: [e-mail]
For More Information, please go to
www.zillionsource.com
*The specifications are just for your
reference. Products shall be subject
to changes without notice.
ZillionTrace×1
Charging Port
Activation Tag