English OhMiBod is committed to bringing you high quality technology enabled pleasure products and accessories. Before you begin enjoying Lumen, please take a moment to review this manual.
Controlling Lumen Via App - OhMiBod Remote To pair with and control by your phone/tablet, within Bluetooth® range or over wifi, download and launch the OhMiBod Remote App: DOWNLOAD THE OhMiBod® Remote App TURN ON Lumen PAIR devices. Make sure your mobile device’s Bluetooth® is turned on. Launch the app, and your Lumen and mobile device will pair automatically. The volume on your phone/tablet controls the vibration intensity. For optimal experience, volume should be set at 50% or higher.
Controlling Lumen Via App - FeelConnect DOWNLOAD THE FeelConnect App TURN ON Lumen PAIR devices. To connect with a partner’s device within Bluetooth® range, follow the instructions on the FeelConnect App to pair your device(s). -ORTo connect remotely to a partner’s device, follow the instructions on the FeelConnect App to pair to your device. Visit www.kiiroo.com/pages/feelconnect for more information. Interactive products -ORTo experience interactive content, go to www.FeelMe.
Using Lumen - 2 Modes of Operation BLUETOOTH MODE® HAS 3 SETTINGS: 1. Initial mode = 100% power & 100% light 2. 1 click = 50% power & 100% light 3. 2 clicks = 100% power & no light Bluetooth® Mode: 1. Press 3-4 seconds to turn on. NOTE: Blinking LED power button indicates vibe is ready to connect via Bluetooth®. 2. Pair to phone/tablet. Bluetooth® range up to 26ft (8m). See section “Pairing Your Phone/Tablet.” 3. Launch OhMiBod® Remote App or FeelConnect App. 4.
Charging Lumen Simply plug the USB charging cable provided with Lumen into the USB port on your computer or USB wall charger adapter. Connect the other end of the cable into the charging connector on the end of Lumen (see diagram). The LED on Lumen will blink indicating the massager is charging. Please be sure that the massager is completely dry before charging. ≈ 1.5 HRS TO REACH FULL CHARGE LED will glow steady when fully charged.
Troubleshooting If the LED does not blink when the product is connected to the USB cable, check to make sure the USB cable is properly connected to the USB port and Lumen. Battery Disposal • Lumen contains a rechargeable battery. Please do not dispose of this product with normal household waste. • Please dispose of this product at the appropriate electrical and electronic equipment recycling disposal locations in accordance with government regulations.
Specifications Lumen WIRELESS SPECIFICATIONS: Materials: Body-safe Silicone, ABS Size: Weight: Battery: Lithium-ion, 3.7V with 220mAH Charging: 1.5 hours Bluetooth® Version 4.1 BLE User time: Up to 3 hours Frequency: 2.402-2.
Special Note from Founder “OhMiBod’s goal is to reflect the collective personality of our customers who have an open, honest attitude toward sexuality and personal pleasure. My hope is that OhMiBod becomes a symbol of liberation, reflecting new and progressive attitudes toward personal pleasure for the young and the young at heart... People who are comfortable with their bodies, know what feels good and who, not only aren’t afraid to admit it, are empowered to go after it.
Copyright© Suki, LLC 2020. All rights reserved.