English OhMiBod is committed to bringing you high quality technology enabled pleasure products and accessories. Before you begin enjoying esca, please take a moment to review this manual.
How it Works DOWNLOAD OhMiBod® Remote App + TURN ON esca + PAIR devices
Using esca - 3 Modes of Operation Bluetooth® Mode: 1. Press 3-4 seconds to turn on. NOTE: Blinking white LED power button indicates vibe is ready to connect via Bluetooth ®. Blinking 2. Pair to phone/tablet. Bluetooth ® range up to 26ft (8m). See section “Pairing Your Phone/Tablet.” 3. Launch OhMiBod ® Remote App. 4. Press and hold NOTE: After 30 minutes of non-use, the massager with automatically shut off to conserve battery life. BLUETOOTH MODE® HAS 3 SETTINGS: 1. 0 clicks = 100% power & 100% light 2.
Manual Mode: 1. Press 3-4 seconds to turn on. 3 times to switch to manual mode. First pulsation is a continuous vibration. 2. Press This confirms manual mode is active. to move to next pulsation pattern. There are a total of 4 pulsations. Pressing the Press button again will cycle back to Bluetooth® mode. 3. Press for 3-4 seconds to turn off.
Pairing Your Phone/Tablet 1. Turn on esca massager. NOTE: Blinking white LED on power button indicates massager is ready to pair. 2. Open the Bluetooth® settings on your phone/tablet.
3. Select “OhMiBod esca”. This is the esca massager. 4. Select “Pair”, if prompted, enter the PIN 0000. 0000 5. LED on power button glows steady ( massager is paired to phone/tablet.
Controlling esca Via App 1. Download and launch OhMiBod® Remote App.
2. Blue indicates connection to phone/tablet. Initial App instructions pop-up upon first use. Connected to phone/tablet Additional information provided “in App” on Support. Connect long distance via WI-FI ADDITIONAL SUPPORT can also be found at: OhMiBod.com/app.
Charging esca Simply plug the USB charging cable provided with esca into the USB port on your computer or USB wall charger adapter. Connect the other end of the cable into the charging socket on the end of esca (see diagram). The LED on esca will blink indicating the massager is charging. Please be sure that the massager is completely dry before charging. ≈ 1.5-2 HRS TO REACH FULL CHARGE LED will glow steady ( ) when fully charged.
Additional Charging Safeguards • Please be sure that the massager is completely dry before charging. • Only use the charging cable provided to charge the massager. • Do not use USB charging hubs to charge the massager. • Only use with UL certified USB wall chargers. Troubleshooting If the LED does not blink when the product is connected to the USB cable, check to make sure the USB cable is properly connected to the USB port and esca. Battery Disposal • Esca contains a rechargeable battery.
ESCA Materials: Body-safe Silicone, ABS Size: 7.3” length, 1.3” diameter (185.4mm length, 33.1mm diameter) Weight: 1.9 oz. (56g) Battery: Lithium-ion, 3.7V with 130mAH Charging: 1.5-2 hours User time: half an hour WIRELESS SPECIFICATIONS: Bluetooth® Version 2.1+EDR Frequency: 2.402-2.
Care and Cleaning • esca is splash proof only. When cleaning, avoid submerging in water and getting any water into the charging socket. • Clean after every use with mild soap and water. Dry thoroughly. • Store in privacy pouch to keep esca clean and safe until next use. Important Safeguards • Do not use on areas that are swollen, inflamed or have skin lacerations. • Stop using the massager if you experience pain or discomfort. • Do not submerge in water. • Do not sure while bathing or in the shower.
Warranty OhMiBod warrants this product for a period of one (1) year from the date of original purchase, against defects due to faulty workmanship or materials. In the event that this product fails during the warranty period, simply email us at customercare@ohmibod.com and provide us with a valid proof of the date of original purchase and we will replace the faulty product at no extra charge.
Special Note from Founder “OhMiBod’s goal is to reflect the collective personality of our customers who have an open, honest attitude toward sexuality and personal pleasure. My hope is that OhMiBod becomes a symbol of liberation, reflecting new and progressive attitudes toward personal pleasure for the young and the young at heart...People who are comfortable with their bodies, know what feels good and who, not only aren’t afraid to admit it, are empowered to go after it.
FCC ID: XG5OMBES01 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Copyright© Suki, LLC 2017. All rights reserved.