® NEXl1 blueMotion byOhMiBod·
English How it Works OhMiBod is committed to bringing you high quality technology enabled pleasure products and accessories. Before you begin enjoying blueMotion®, please take a moment to review this manual.
Using blueMotion® - Modes of Operation Cycling through modes: Once power is on, tap the button to cycles through modes. The modes are as follows: Bluetooth® Mode: Bluetooth® Connection (Blinking blue means awaiting connection with App) Manual Modes: Low Medium High Slow Throb Fast Throb Press and hold the button for to connect with the App. ~ 8 seconds to enter pairing mode.
Using blueMotion® - 2 Modes of Operation Bluetooth® Mode: Manual Mode: 1. Press 1. Press 2-3 seconds to turn on. NOTE: Blinking blue LED power button indicates vibe is ready to connect via Bluetooth®. Blinking 2. Pair to phone/tablet. Bluetooth® range up to 26ft (8m) 2-3 seconds to turn on. 2. Press again to switch to manual mode. First pulsation is a continuous vibration. This confirms manual mode is active. Press to move to next pulsation pattern. There are a total of 4 pulsations.
Pairing Your Phone/Tablet 1. Turn on blueMotion® massager. NOTE: Blinking blue LED on power button indicates massager is ready to pair. 3. Select “OhMiBod”. This is the blueMotion® massager. 4. Select “Pair”, if prompted, enter the PIN 0000. 0000 2. Open the Bluetooth® settings on your phone/tablet. 5. LED on power button glows steady ( )when massager is paired to phone/tablet.
Controlling blueMotion® Via App 1. Download and launch OhMiBod® Remote App. 2. Blue indicates connection to phone/tablet. Initial App instructions pop-up upon first use. Connected to phone/tablet AVAILABLE FOR DOWNLOAD ON: Additional information provided “in App” on Support. Connect long distance via WIFI ADDITIONAL SUPPORT can also be found at: OhMiBod.com/app.
Charging blueMotion® Troubleshooting Simply plug the USB charging cable provided with blueMotion® into the USB port on your computer or USB wall charger adapter. Connect the other end of the cable into the charging socket on the end of blueMotion® (see diagram). The LED on blueMotion® will blink indicating the massager is charging. Please be sure that the massager is completely dry before charging.
Care and Cleaning blueMotion ® Materials: Body-safe ABS Size: 3 3/4” length, 1 3/4” width, 0.5” depth (90mm length, 43mm width, 13mm depth) Weight: 2.3 oz. (65g) Battery: Lithium-ion, 3.7V with 160mAH Charging: 1.5-2 hours • blueMotion ® is splash proof only. When cleaning, avoid submerging in water and getting any water into the charging socket. • Clean after every use with mild soap and water. Dry thoroughly. • Store in privacy pouch to keep blueMotion clean and safe until next use.
Warranty OhMiBod warrants this product for a period of one (1) year from the date of original purchase, against defects due to faulty workmanship or materials. In the event that this product fails during the warranty period, simply email us at customercare@ohmibod.com and provide us with a valid proof of the date of original purchase and we will replace the faulty product at no extra charge.
FCC ID: XG5OMBBM03 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Copyright© Suki, LLC 2017. All rights reserved.