Document No.: UM- WJBS7E_2HC -001 Version No.: V1.0 WJBS-7E_2HC Transmission Adaptor Instruction manual Compiler: Liang Jiawen, Yang Shaohua, Zhang Qian Approved by: Yang Shaohua Reviewed by: Li Baofu Yu Yongqiang Countersigned by: Mo Yiting Zhuhai UNITECH Power Technology Co., Ltd.
Revision History ii Date Version Summary of Revision Revised by Approved by 2014-03-10 V1.
Contents CHAPTER 1 GENERAL DESCRIPTION ................................................................ 1 1.1.Overview............................................................................................................................................ 1 1.2. FCC Statement ................................................................................................................................. 1 CHAPTER 2 APPEARANCE .............................................................................
Chapter 1 General Description 1.1. Overview The WJBS-7E_2HC Transmission Adaptor can be configured with some slave machines flexibly (one host machine supports up to five slave machines), and the handheld devices supported by each slave machine can be independently configured to meet different requirements on site. Between the WJBS-7E_2HC Transmission Adaptor and the upper computer, multiple communication interfaces are supported, including: serial, USB (2.
Chapter 2 Appearance Front view: The buttons on the host machine are described as follows: 2
1 4 2 3 No. Button Definition Function 1 ESC Exit 2 < Select (left) 3 > Select (right) 4 Enter Confirm Chapter 3 Description of Interfaces and Indicators 3.1.
1 4 3 2 5 No. Function 1 OFF/ON power switch 2 External power supply interface 3 USB interface 4 RS232 interface 5 Ethernet interface 3.2.
1 2 3 No. Indicator Definition 1 RUN 2 HOST 3 SLAVE Function It quickly flashes twice every 3 seconds: This indicates that the host machine is in BOOT status (for software upgrade and factory configuration). It quickly flashes once every 3 seconds: This indicates that the host machine is in APP status (normal operation status). The red light flashes: This indicates that the host machine is receiving data from the upper computer.
3 2 1 No. Indicator Definition Function It quickly flashes three times every 3 seconds: This indicates that the slave machine is in BOOT status (for software upgrade only). 1 RUN It quickly flashes once every 1 second: This indicates that the slave machine is in APP status (normal operation status). The light is off: This indicates that there is no handheld device in the slave machine.
Chapter 4 Instructions 4.1. Charge After the WJBS-7E_2HC Transmission Adaptor is connected to the power supply, a Smart Key can be placed in a holder of a slave machine for automatic charging. The charging progress can be seen from the display of the Smart Key. 4.2.
(View the version information of the host machine's main program and BOOT program) (View the version information of the slave machine's main program and BOOT program) 4.3.2 A prompt is cyclically displayed when the key is placed incorrectly: When the key is placed incorrectly, the buzzer generates a warning every 30 seconds, and the prompt "Please place the front (rear) key correctly" is displayed cyclically on the host machine's LCD.
(Cyclically displayed prompt "Please place the front key correctly") 4.3.3 NIC configuration: (Note: After the NIC configuration is modified, you need to restart the machine to make the new configuration valid.
(Configure the local parameters, pressing Left/Right for selection and pressing Enter for revision) (Configure the port parameters, pressing Left/Right for selection and pressing Enter for revision) No. Configuration Option Function 1 Port number Port number of the adapter 2 Destination port Port number of the upper computer 3 Destination IP IP address of the upper computer 4.3.
(Set the system time of the machine, pressing Left/Right for selection, pressing Enter for revision, and pressing ESC for saving and exiting) 4.3.5 Set the brightness of the backlight: (Set the brightness of the backlight, pressing Left/Right for adjustment (range: 1-8) and pressing Enter or ESC for saving and exiting) 4.3.
(Set the background, pressing Left/Right for selection and pressing Enter or ESC for saving and exiting) 4.3.7 Set the language: (Set the language, pressing Left/Right for selection and pressing Enter or ESC for saving and exiting) 4.3.8 Communication interface: The WJBS-7E_2HC Transmission Adaptor supports simultaneous communication of up to four slave machines, if more than 4 slave machines communicate simultaneously, the last slave machine shall wait until the previous one ends communication.
(The WJBS-7E_2HC Transmission Adaptor supports simultaneous communication of up to four slave machines) 4.3.9 Main Interface: Description of main interface icons ● Description of Ethernet state icon (Take port 0 as an example, the icon is the same for the other ports.) This icon cyclically displays the current status of each of the four Ethernet ports, the icon for each status is described as follows: No.
● 1 The port is not enabled. 2 The TCP connection of the port is disconnected. 3 The port is in transition status, and does not respond to TCP connection requests. 4 The port is in Server mode and listening to the Client end, in this case, it can respond to TCP connection requests. 5 The TCP connection of the port is established successfully, and data transmission is ready. 6 The port is in UDP status, and data transmission is ready.
6 The internal USB circuit is connected to the handheld device in slave machine 5, that means, this handheld device is directly connected to the computer through a USB cable. 7 (No icon) The internal USB circuit is disconnected.