Data No.: Version No.: UT-059B_UL Key Management Cabinet Operating Manual Total 37 page(s) Zhuhai Unitech Power Technology Co., Ltd.
Document Revision History Date 05-23-2014 Version V1.
Copyright Copyright of the “UT-059B_UL Key Management Cabinet Operating Manual” belongs to Zhuhai Unitech Power Technology Co., Ltd. Without the written permission of Zhuhai Unitech Power Technology Co., Ltd., any part of this manual shall not be reproduced or distributed in any form, by any means (electronic or mechanical, including photocopying or recording), or for any purpose. (c) Copyright 2014, Zhuhai Unitech Power Technology Co., Ltd., all rights reserved, any reproduction will be investigated.
Reading Guide Manual Target: This manual aims at providing operating instructions for UT-059B_UL key management cabinet provided by Zhuhai Unitech Power Technology Co., Ltd., which will enable the users to basically understand product functions, performance and features, and to master the device usages and maintenance methods.
Table of Contents Chapter 1 1.1 1.2 Technical Features ........................................................................................... 2 System Technical Parameters........................................................................... 3 Chapter 2 2.1 2.2 2.3 2.4 2.5 3.4 System Description .................................................... 4 Dimensions ...................................................................................................... 4 Installation Dimensions ....
4.1 Single Authorized Operation Mode ............................................................... 25 4.1.2 Selection of the Operation Reasons and Key .................................. 25 4.1.2.1 Locking Mode .......................................................................................... 26 4.1.2.1.1 Select the Key................................................................................ 26 4.1.2.1.2 Select the Operation Reasons ........................................................
Chapter 1 Overview Currently, many substations and power plants introduce microcomputer safety interlock devices, and those devices have provided the safe operation of the power production with strong guarantee. However, it is short of effective and feasible methods to manage some special unlocking keys used by these devices, thereby directly affecting the safe production of power system. To this end our company has developed UT-059B_UL key management cabinet that can better resolve this problem.
connected. -Consult the dealer or an experienced radio/TV technician for help. Display Swiping area Digital input area Power button, power supply, running indicator Operating button Key storage area Cabinet door Organic glass, removable in case of emergency Fig. 1-1 External view of UT-059B_UL key management cabinet 1.
Support both locking and non-locking modes; With lighting function; Provides rechargeable battery as a backup power supply, operational in case of a blackout condition. 1.
Chapter 2 System Description 2.1 Dimensions Fig. 2-1 UT-059B_UL dimensions 2.2 Installation Dimensions Fig. 2-2 UT-059B_UL installation and holing sizes 4 Fig.
2.3 Wiring Socket Instructions UT-059B_UL key management cabinet have multi-interface, Serial port and USB port are located on the top side of the left of the device, As shown in the figure below: Debugging port USB interface Fig. 2-4 debugging port and USB interface Ethernet port and power socket is located at the lower right side of the device, as shown in Fig.
Network Power socket Fig. 2-5 UT-059B_UL ethernet port and power socket 2.4 Indicator Description There are two indicators on the system panel: one power indicator and one running indicator. After the power is turned on, if the power indicator remains red, it means that it is using external AC220 to supply the power, if the power indicator becomes green, it indicates that the current power is supplied by the battery; and the running indicator is green and flashes once per second. 2.
Chapter 3 Functional Operation of the Management Cabinet The following is an introduction of the operating methods of the UT-059B_UL key management cabinet (hereinafter referred to as the “device”). 3.
UNITECH 2014-05-23 10:18 Please Of which the icon and swipe card presents unlocking and locking state respectively. Presence of means that the slave communication is abnormal, if it is normal, such the icon does not appear, and means successful communication with the host device (if network authorization provided). In the main interface, it displays the current real-time date and time. In the main interface, press the “Digit” key to enter the “Password Log” (see “3.3.
3.3.2 Password Login Password login is to select the user first, and then enter the user password, if you enter a wrong password, the device will prompt.
Please log in！ When the system is equipped with a U disk mode, and the user tries to enter the “Management Function” menu without login, the system will pop up a prompt message box as follows: Please insert the U-Key! In the menu interface, the system highlights the selected menu in white, the user can use the “Up, Down, Left, Right” (, , and ) keys to select a menu, press the “Enter” key to enter the menu, and press the “Esc” key to return to the previous menu.
Press the arrow keys to switch the menu: Main menu Function Change password About ：switch ▲ ▼ 3.4.1.1 Record Browse 1 of 58 Operator：John 2014/05/23 17:33:40 Take：Key 2# Authorizer：Tomy ：switch Record browsing is mainly to see the history of device to operate the keys. Recorded contents include operating time, operator, authorizer and key names.
3.4.1.
3.4.1.3 About Contents in the “About” include “Company Name”, “Master and Slave Software Version”, “Date” and “Serial Number”, etc., as shown in the figure below: About Host Var.：1.00 Data：2014-6-16 Slave Var.：1.00 Data：2014-5-23 SN：2099123999 UNITECH 3.4.
Function Create account Account setting Search user ▲ ▼ :switch Press the arrow key to switch the menu: Function Search user Browse user Delete user ▲ ▼ :switch 3.4.3.1 Create Account Add user information for user registration to edit the user ID, permission and password (initial password is 123456). Interface is related to the configuration mode, and the interface is as follows: Create account ID： 1 Authority：Manager CardNo.
Where “ID” is automatically generated by the system, the user can also change it, but the user ID can not be repeated in the system, otherwise it will pop up a message box “User ID already exists!” when adding the user.
and keys: Forward and backward to switch the editing point; ▲ key: Used for selection of the permission drop-down selection box; ▼ key: When the input point is an permission, it is used for selection of the drop-down selection box; and input of ID and password is used to clear the currently entered contents; “Esc” key: Used to exit the added user and return to the previous menu; “Enter” key: Used to confirm the contents and add the users; “Digit” key: when the inputs are at ID or password, it
Manager At this time, the user can use ▲ and ▼ keys to change the permission of the corresponding user, press the “Enter” key to save user's permissions and exit to user management, and press the “Esc” key to give up this operation to return to the user management. 3.4.3.
edited. When the user wants to conduct a new inquiry, it is just to swipe the card to be queried again at the swiping area. “Esc” and “Enter” keys: quit from the Search User and return to the previous menu; “Digit”, ▲, ▼and keys: do not respond; The user can press the key to enter the password user interface to modify the password by entering the password, since this operation is the same as that in 3.4.2 Password Login, it is no longer repeated here. 3.4.3.
“Enter” key: Exit records browsing, return to the previous menu; “Digit” key: no response; 3.4.3.5 Delete User If the system is not provided with the users, it will prompt the following information: Delete user System user number is 0 ! Esc Enter：Quit Press the “Enter” or “Esc” key to exit the “Delete User” menu and return to the “User Management”.
3.4.3.5.
When it selects “Delete All Users” in the delete mode, the interface prompts the following information: Delete user Delete Esc：Quit all user？ Enter：Sure Press the “Enter” key to delete all the users and return to the user management menu, and then press the “Esc” key to exit from the delete user menu to the user management interface. 3.4.2 System Setting System setting is mainly used to set system’s time, setting mode and configuring user’s unlocking key information, which is described as follows.
Users can set the time and date, but the user can not set the week, which is automatically generated by system automatic calculation based on the set date of the current user. Users can either use the “Digit” key to make direct input or use ▲ and ▼ keys to change operation. If the user-entered value is not legitimate, system will automatically restore the value to the legitimate value.
such function is provided, currently editing options are highlighted in white. Setting Unlock Key beep reason Debug mode ：Edit and keys: Switch the current configuration state of the options; ▲ and ▼ keys: Forward and backward to switch the editing point; “Esc” key: Cancel the setting and return to the previous menu; “Enter” key: Save the setting and return to the previous menu; “Digit” key: no response; 3.4.4.
▲ ▼：Edit Note: Key configuration option displays only when locking mode is configured. ◀ and ▶ keys: Forward and backward to switch the editing point; ▲ and ▼ keys: “Enter” key: “Esc” key: Switch the current configuration state of the options; Change the key permission; Prompt whether to save the changed key permission, if it is confirmed to save the change, it will return to the previous menu, and if it is confirmed not to save the change, it will return to the previous menu; 3.4.
Chapter 4 Key Management 4.1 Single Authorized Operation Mode (For the number of the swiping cards, it may be unnecessary for the user to change after it is configured by the technicians of our company.) If the number of swiping the cards of the system is 1, as shown in the figure below: UNITECH 2014-05-23 10:18 Please swipe card At this moment, the system can only accept one user login, after the user has logged in (for login, see “3.
state, the user can not remove them; in the non-locking mode, once the door is open, the user is not limited to take any keys. 4.1.2.1 Locking Mode In the locking mode, the user must first select the key to be operated, and then select the operation reasons, the system will unlock the corresponding key, and the user either take away the key or return the key. 4.1.2.1.
Select unlock reason 01：Lock fault 02：Maintenance 03：Energency unlock 04：Smart key fault 05: SIS fault 06：Retury key ：switch ▲ ▼ In case of default, the system has seven selectable operation reasons: 1：Lock fault 2：Maintenance 3：Energency unlock 4：Smart key fault 5：SIS fault 6：Retury key 7：Other reasons The user can use ▲, ▼, and keys to select the operation reasons, the selected is highlighted in reverse color. Press the “Enter” key to start operation after selection is made. 4.1.2.1.
Have no this key! Prompt interface of the management cabinet is as follows: Position 3 back to 2! According to prompt, the user should insert the wrongly inserted key back into the correct position. 4.1.2.2 Non-locking Mode In the non-locking mode, the user must first select the operation reason (for how to select the operation reasons, please refer to “4.1.2.1.2 Select the Operation Reasons”), then the device will automatically unlock the door, and the user can take the key now.
UNITECH 2014-05-23 10:18 Please 请插入 insert U 盘开门 U-Key! Before U disk is inserted to open the door, the system will verify the inserted U disk, if the inserted U disk is not registered with the support PC or doesn’t have the operating permission of the management cabinet, it will prompt as follows. Press the “Enter” or “Esc” key to return to the main interface: The U-Key Has No Auth! U-Key User can Not Operate In Current State! After successful verification, refer to “4.1.
Records saved! 4.1.4 Network Authorization If the system is not equipped with network authorization, skip this section, and go directly to “4.1.2 Select the Operational Reasons and Key”. When the system is equipped with network authorization, after the user has logged in the website, it can directly unlock the management cabinet’s door as well as the key. 4.
Note: The login user must have an operating permission while the other should have an authorized permission. a) If the user has no operating permission, the interface prompts as follows: No Authorization ! Press the “Enter” or “Esc” key to return to the main interface of the system, the user has logged in and can start menu operation, for menu operation, refer to the “3.4 Menu Operation”.
the user to select the authorization mode (authorization modes depend on the configuration in the operation mode), such as for selecting the network authorization, it should swipe the first card to open the door, and then enter the interface for selecting authorization mode: Select Mode Swipe mode Net mode ：switch Authorization modes have two kinds: card swiping authorization and network authorization, of which card swiping authorization is a basic authorization, other authorization will become valid onl
◀ and ▶ keys: Forward and backward to switch the editing point; ▲ and▼ keys: Function keys, represents whether it is selected, and an appropriate key is selected; “Enter” key: Prompt whether it needs to save the key number that needs to apply for unlocking; “Digit” key: Response, when the entering is beyond the limit, it displays user’s first key number with the unlocking permission; “Esc” key: Prompt whether to exit from this interface, it is verified to return to the main interface, if not, it will not ex
Note: If the principal computer successfully communicates with the management cabinet, the small dot on the upper left corner shown in the figure becomes red, otherwise it is gray. 4.3 Multiplayer Authorization Operation Mode For a system equipped with a swiping card number of 3, in addition it can be operated only after three users have logged in, other conditions and configurations are the same as those of the swiping card number of 2, so it is not reiterated here. 4.
Chapter 5 Remedy of the Common Problems No.
