User Manual for iKeyMU-1_F Smart Key Document No.: TSS-iKeyMU1_F-001 Version No.: V1.0 IKEYMU-1_F SMART KEY USER MANUAL Total 43 Pages Formulated by: Liu Xiaojun Audited by: Yang Shaohua Reviewed by: Xu Yinhua Countersigned by: Ma Jinhui Approved by: Li Baofu Zhuhai Unitech Power Technology Co., Ltd. Sept.
User Manual for iKeyMU-1_F Smart Key .Contents 1 OVERVIEW ............................................................................................................................................ 1 2 APPEARANCE AND COMPONENT FUNCTIONS ................................................................................................ 2 3 FUNCTIONS AND PERFORMANCES .............................................................................................................. 4 4 TECHNICAL PARAMETERS .........
User Manual for iKeyMU-1_F Smart Key 5.7.3.4 Delete Orders ................................................................................................................................. 27 5.7.4 Functional Test .................................................................................................................................. 27 5.7.4.1 Voice Test........................................................................................................................................ 28 5.7.4.
User Manual for iKeyMU-1_F Smart Key 1 Overview The iKeyMU-1_F midsize smart key is a new type of OLED color-screen smart key based on the “Double-less” technology of the company, which can be operated in conjunction with JOYO series of microcomputer safety interlock systems.
User Manual for iKeyMU-1_F Smart Key 2 Appearance and Component Functions Figure 1:Appearance Diagram of iKeyMU-1_F Smart Key 1 ------- Smart key housing; 2 ------- Speaker hole; 3 ------- Keys, including the Return key (the Switch on/off key), the Up key, the Down key, and the Enter key represented by On / Off, Up, Down, and Enter.
User Manual for iKeyMU-1_F Smart Key 11 ------ Battery locking knob; 12 -------High-capacity poly-lithium rechargeable battery; 13 ------ Battery cover label; 14 ------ Charger electrode; 3
User Manual for iKeyMU-1_F Smart Key 3 Functions and Performances Limitless coding; and the coding system adopts the GUID; Wireless code acquiring; the smart key adopts the non-contact acquisition mode.
User Manual for iKeyMU-1_F Smart Key Ultra-low temperature poly-lithium battery with independent encapsulation design; Supporting all the Chinese character databases stipulated by GB2312; Strong resistance to ultra low temperature (-40℃); high contrast, and multi-line Chinese character displayer.
User Manual for iKeyMU-1_F Smart Key 4 Technical Parameters Ambient Temperature: -40℃~+70℃ Environment Relative Humidity: Daily Mean≤95%, Monthly Mean≤90% Power Source: 4.
User Manual for iKeyMU-1_F Smart Key 5 Operation 5.1 Elementary Operation 5.1.1 Start ① Ensure that the smart key is available to be powered. If the battery runs low, the smart key can’t start, please operate in accordance with the second step. ② Place the smart key on the charger and check if it is properly placed and is stably connected to the charger.
User Manual for iKeyMU-1_F Smart Key 5.1.3 Preparation before Operation The iKeyMU-1_F smart key is a general-purpose smart key, which can be applied to any station, and it is required to enable the “self-learning” function before operation, thus to transmit the station's device information to the smart key. If the device information is not modified in a station, the smart key can be used forever as long as enabled “self-learning”. 5.1.
User Manual for iKeyMU-1_F Smart Key 5.1.5 Shortcut Menu 1) In the standby mode, press the Enter key to the shortcut menu as shown below: Now, take the “Voice” menu as an example, select and press the Enter key to display the following interface: In this page, a user can enable or disenable voice quickly and easily. 5.
User Manual for iKeyMU-1_F Smart Key Thereinto: Press the Return key to the previous menu。 1) Under the UT-NET communication mode, a user can just set the master station to the self-learning state to enable the key to receive self-learning data. 2) Under the IRDA communication mode, a user needs to set mimic panel (or synthetic operation interface and other devices) to self-learning state, and then aim the smart key at transmission port of transmission adapter, and keep a distance within 1.
User Manual for iKeyMU-1_F Smart Key prompts the information such as “connecting to the wireless network, GET MAC ...,” when the UT-NET initialization is completed, it can enter the order-receiving interface. If the communication mode is IRDA, the key can enter order-receiving interface directly.
User Manual for iKeyMU-1_F Smart Key When the smart key has processed and saved the received data, the key can switch to the following operating interface automatically. A user can operate on site now in accordance with the displayed content. 5.4 Unlock 5.4.
User Manual for iKeyMU-1_F Smart Key Find the corresponding device matched with the displayed by the key on site, and insert the smart key into the keyhole, if the code is correct, the smart key can ring “beep” or make a voice prompt “Correct, Please Operate!” (Available to set in the system) and display as follows: Press the Unlocking button to open the mechanical coding lock at this moment and then switch.
User Manual for iKeyMU-1_F Smart Key At this moment, the operator can’t unlock because the interlocking gear is locked. 5.4.2 Unlock the Devices Interlocked by Circuit Locks Such as Circuit Breaker , Electric Disconnector, etc.
User Manual for iKeyMU-1_F Smart Key Press and hold down the “success” or “failure” key (for 2 seconds) to select the operating results, “success” indicates that this step is complete, the key can enter the next step; “failure” indicates that this step is not completed and will be restarted.
User Manual for iKeyMU-1_F Smart Key A user can operate circuit lock or mechanical lock as needed, then the user should insert the corresponding locks and press the Unlocking button to unlock, the smart key rings “beep” and displays the following information: It indicates that the smart key has completed its working; the user can remove the smart key and continue the next operation. While inserting the corresponding circuit lock, it is available to operate in accordance with the steps described in “5.4.
User Manual for iKeyMU-1_F Smart Key 5.4.5 State Detection The smart key shows the state of the device to be detected, please find the corresponding connection or disconnection state detectors, electrical switching state detectors in accordance with the device number shown on the smart key, and insert the smart key; the smart key can continue its working only after detecting the correct state. 5.4.
User Manual for iKeyMU-1_F Smart Key When the smart key displays the following information in the detecting process: And produces rapid alarm sound “Beep…Beep…Beep…”indicating the circuits are electriferous, and can’t enter the next operation. When the smart key displays the following information, and rings “Beep”, it indicates that the circuits aren’t electriferous, remove the smart key from the electroscope and enter the next operation. 5.4.
User Manual for iKeyMU-1_F Smart Key At this moment, It is available to insert the smart key back into the adapter (or integrated operation interface, transmission port, etc.) to control unlocking and other operations by such the devices, or use the smart key to unlock. ① Use mimic panel (or integrated operation panel) in conjunctions with other devices.
User Manual for iKeyMU-1_F Smart Key unlock, see details in the section “② Unlock with the smart key.” ② Unlock with the smart key If use the smart key to unlock the device, please refer to the operation methods for circuit or mechanical coding lock. 5.4.
User Manual for iKeyMU-1_F Smart Key If the smart key doesn’t check the correct connection, the smart key displays the following image to inform the operator that the current device is not switched, please check it, then the operator must check if the current device is in the correct position, if the device is not in the required position, please find the reason, and switch the device to the correct position, then press the Unlocking button on the smart key, the smart key can continue to show the next oper
User Manual for iKeyMU-1_F Smart Key as follows: 5.5.2 Suspension Postback Suspension postback refers to a postback when the operation order has not been completely executed. Select the Main Menu- Postback - Suspension Postback to enter the option. If the operation orders are fully executed, it can prompt that “all operation orders have been operated, it is unavailable to post back now”.
User Manual for iKeyMU-1_F Smart Key 5.6 Browse Orders 5.6.1 Browse Order Contents The order browsing functions as browsing and checking the content of the current operating order in the smart key. Select the Main Menu- Browse Orders - Browse Order Contents to enter the option.
User Manual for iKeyMU-1_F Smart Key 5.7 Accessibilities 5.7.1 Self-Learning See details in the section 5.2 Self-Learning. 5.7.2 Check Code The option is to check the code value or RFID value of the current lock. And it is also capable of showing the corresponding device name. Select the Main MenuAccessibilities –Check Code to enter the option, press the Enter key to read the lock code or RFID code value. The code’s equipment name can be shown if exists.
User Manual for iKeyMU-1_F Smart Key 5.7.3 Special Operations 5.7.3.1 Smart Unlock Select Special Operations-Smart Unlock, the smart key shows as follows: At this moment, insert the skipping key to enter skipping verification process, if validated, it is available to continue smart unlocking operation. 5.7.3.
User Manual for iKeyMU-1_F Smart Key to identify the skipping key, 5 seconds later, the smart key displays as follows: If fails, the key displays: Please remove the smart key from the skipping key when the skipping operation is successful, the smart key loads the next operation automatically, and continues its operations. 5.7.3.
User Manual for iKeyMU-1_F Smart Key 5.7.3.4 Delete Orders If doesn’t want to operate an received operating order or post the result back, a user can press the Up or Down key to select -Special Operation-Delete Orders, and press Enter key, the key will show the following interface: Thereinto: Press the Enter key to delete the order, the smart key will automatically return to the main menu; or press the Return key to directly return to the main menu, rather than to delete the operation order. 5.7.
User Manual for iKeyMU-1_F Smart Key 5.7.4.1 Voice Test A user can press the Up or Down key to select the “Voice Test” option on the menu “Functional Test”, the option is mainly used to test the voice system of the smart key, press the Enter key to enter the voice test state, the smart key displays as follows: Press the “Enter” key to continue other voice tests. Press the “On / Off” key to the previous menu. 5.7.4.
User Manual for iKeyMU-1_F Smart Key On this state, the smart key can automatically produce beep sound from high to low tone every other 600 milliseconds, and repeat such14 tones. A user may press the Enter key or the Return key to the sub-menu at any time. 5.7.4.3 IRDA Communication Press the Down or Up key to select the “IRDA Communication” option on the menu “Functional Test”; this option is mainly used to test the normality of IRDA, press the Enter key to enter the test state. 5.7.
User Manual for iKeyMU-1_F Smart Key 5.7.6 Test for Production The menu provides a series of testing programs special for production, and such test options are unavailable to the final users for further safe and reliable operations. If a user enters the menu, the screen will display an interface for inputting password, the user can ignore it, or press the Cancel key to the previous menu, the operating interface is as shown as below: 5.8 System Settings 5.8.
User Manual for iKeyMU-1_F Smart Key 5.8.2 Communication Parameters The communication parameters include CDMA and UT-NET parameters. Select the UT-NET, press the Enter key to the corresponding parameter settings, including wireless ID, P2P Address, P2P monitoring, network settings and offline settings. The wireless ID is the unique parameter indicating the identity of the key, including 16-bit numbers.
User Manual for iKeyMU-1_F Smart Key Server IP: Set the IP address of the server. Server port: Set the server's port number in communication. Login user: identify the ID of a user.
User Manual for iKeyMU-1_F Smart Key Password: set the user's password. International ID: set IMSI number of CDMA card. PPP connection: Set PPP connection address in test of CDMA mode. Authentication: enable and disenable the identification function of user name. Permission Settings: set the permissions under CDMA mode, including default, PAP and CHAP a.
User Manual for iKeyMU-1_F Smart Key Operation Mode: set the continuous and discontinuous modes under the CDMA communication mode. 5.8.3 Voice Settings The menu functions as modifying voice-related parameters, including voice settings, volume settings, recording module, enable recording, and Electroscope voice.
User Manual for iKeyMU-1_F Smart Key “uncharged, available to operate”, when the electroscope runs. 5.8.4 Backlight Brightness The menu functions as setting backlight brightness, Select System Settings Backlight Brightness on the main menu, to enter the menu. Press the arrow keys to increase or decrease the backlight brightness; press the Enter key to save the current backlight brightness level. Press the Return key to the previous menu. 5.8.
User Manual for iKeyMU-1_F Smart Key 5.8.6Background Settings The menu functions as setting the background pattern of the user interface, Select System Settings –Background Settings to enter the menu, as shown as below. Press the Up or Down key to select the background image, press the Enter key to set, press the On / Off key to cancel the operation.
User Manual for iKeyMU-1_F Smart Key 5.8.7 Smart Unlocking The menu functions as setting the smart unlocking options, Select System Settings –Smart Unlocking to enter the menu. After entering this menu item, press the Up or Down key to select the options, press the Enter key to enter the submenu, press the Enter key to save the current option, and then return to the previous menu. Press the Cancel key to cancel the modification and directly return to the previous menu. 5.8.
User Manual for iKeyMU-1_F Smart Key The postback settings are only available in the case of the distribution network key, including continuous mode and discontinuous mode. 5.9 Help Operate the menu to check the system information of smart key, and press the Up or Down key to select the various functional options on the menu, press the Enter key to display the related information, as shown as follows: Thereinto: Press the Return key to directly return to the main menu.
User Manual for iKeyMU-1_F Smart Key 6 Special Functions 6.1 Auto Power-off The smart key will automatically power off if continues its standby state for 6 minutes, If it is being charged or fully-charged state, or being under cycle unlocking test for electric-controlled lock or discharging test, the key will cancel the auto power-off, till the above state is canceled. 6.
User Manual for iKeyMU-1_F Smart Key 6.4 Outdoor/Indoor Mode In outdoor operating, the key is exposed under sunlight and cause that users can’t see the content on screen clearly, please switch to the outdoor display mode.
User Manual for iKeyMU-1_F Smart Key 7 Precautions in Operating Please note the following issues to ensure your safe and reliable use: a. Placement: when the smart key is not in service, please place the smart key in a fixed place, rather than random places. b. Do not place the smart key in any specially wet environment in a long term, to extend the service life of the smart key. c.
User Manual for iKeyMU-1_F Smart Key 8 Troubleshooting Troubles Causes Solutions 1. Battery voltage is low. The smart key cannot self-learn, or is abnormal in self-learning. 2. Self-learning program is incorrectly operated. 3. Transmission port of the main control equipment is damaged. Mechanical coding lock is opened, but unlocking program cannot continue. 1. The internal IRDA device of the smart key is damaged. 2. Unlocking stem is offset. 1.
User Manual for iKeyMU-1_F Smart Key The smart key says “The key has not self-learned, not prepared for normal operation.” The smart key did not self-learned before Please self-learn. operating normally. 1. The charger is damaged. Fully charged in a charger, but the battery runs out in a very short time. 2. The battery has been used for such a long time 1. Repair or renew the charger. 2. Renew the battery. that it causes the battery 3. Send the smart key back to Zhuhai aging.
User Manual for iKeyMU-1_F Smart Key device must accept any interference received, including interference that may cause undesired operation.、 Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.