Intelligent Auto Dial Alarm System (dial automatically the number saved by householder) RL-0503F USER MANUAL Ideal for house, company, warehouse etc. where anti-theft is needed. The system will alarm sharply when someone intrudes illegally in arms status, meanwhile 6 groups of telephone numbers stored in the main unit will be dialed automatically. = Compared with other products, the user manual of RL-0503F is easier lo operate.
shouldn't Loose the screws, load dx | RE alkaline batteries aad pulpit an obvious place inside the house, C Magnet sensor: It consists of magnetic bar and sensor. Stick the magnetic bar and sensor on the door and door frame with double-side adhesive tape. Align the magnetic bar and sensor and pay attention that the distance between them is not more than 10mm, D Infrared sensor: 1 oad 4x | R6 alkaline batteries. Put the adjustable bracket in a needed place and hang the infrared sensor on i.
3. Cancal the alarm number Press * and #, then indicating sound will be heard to identify that the set six alarm numbers have been canceled. 4 Lock & unlock the keypad Press button LOCK 1o lack the keypad; press bunion LOCK two times to unlock the keypad. JON & OFF the system a Normal: switch the remote ON, ane indicating sound from tie main unit and wireless siren will be heard separately and SAVE will ba shown in the screen. The layette will be armed 30 absconds later.
Infrared sensor + Input volts: DC4.5V (AAA) = Standby current: <0.1mA «+ Transmission current: <8mA « Transmission frequency: + Transmission distance: >50m (open area) + Inductive distance: >5m (open area) +» Low voltage indication: Magnet sensor + Input volts: DC4.