User's Manual

Six-direction anti-theft alarm system
RL-0506A
1. Fittings:
● Six door sensors (Enclosed 3x LR44 batteries and double-side adhesive tape)
●
One main alarm unit (3x LR6 batteries)
● Two portable remote controls (Enclosed 1x23A battery)
2. Usage
Ideal for house, shop and warehouse etc. Six windows or doors of within six places are available.
3. Feature
● Arm or disarm the main unit with portable remote controls to ensure the correct alarm.
●
Door sensors can alarm after sending the alarm signal to the main unit.
● The main unit can alarm sharply if door or window is opened in the armed state; the
indicator light can show which door or window is opened to protect the security and
property.
● Six doors or windows are possible and available at most.
●
More remote controls are available.
● Energy-saving circuit. Enclosed batteries for door sensors and remote controls can work
for more than 1 year; batteries for the main unit for around 3 months.
4. Operation instruction
●
Load 3x LR6 batteries into the main unit.
● Enclosed batteries for door sensors. Peel the double-side adhesive tape and stick it onto
door or window that anti-theft is needed. Align the arrows of magnet and sensor and
make sure the distance between them is not more than 1cm. 6 door sensors at most are
available. The main unit can be hung anywhere one likes. Remove the transparent cover
and write the numbers on the right of power indicator and then cover it.
● Switch the main unit ALARM when anti-theft is necessary. It will sharply alarm when
door or window is opened; the indicator light can show which door or window is opened
to protect the security and property.
● Switch the main unit CHIME, and it will remind you that door or window is not opened
well with graceful door bell sound.
●
Switches on the right of door sensors for option:
1) Give out alarm signal as long as door or window is opened;
2) Alarm 2 seconds later after giving out signal as long as door or window is opened.
● Batteries for remote and door sensors can work for around 1 year and that for the main
unit for around 3 months.
Warning:
Changes or modifications to this unit not expressly approved by the party responsible for
compliance will void the user’s authority to operate the equipment. Any change to the equipment
will void FCC grant.